02-19-2020, 11:04 AM | #1 |
Drives: 2011 camaro 2 SS Join Date: Jun 2019
Location: peterborough ontario
Posts: 19
|
SEAT PROTECTION
Im looking for protection on the back of my passenger seat. Ive got a little guy in a car seat that likes to kick and push on the seat to the point its pulling the seams apart. Any suggestions on a cover of some kind that just covers the back. Thanks
|
02-19-2020, 12:47 PM | #2 |
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,155
|
Last edited by gtstorey; 04-18-2022 at 09:18 AM. Reason: new link |
02-19-2020, 12:49 PM | #3 |
Drives: White 2015 Z/28 Join Date: Jul 2017
Location: Charleston SC
Posts: 208
|
Sites sell "Pet Blankets/Covers" for cars/trucks. They just install over your current back seats. However, this was mostly designed to protect the backseat and for Sedans/SUVs/etc. so it might not work exactly as intended. The one linked below covers the entire back area of the car. Doesn't look the greatest but it will keep all of your seats protected lol
https://www.chewy.com/barksbar-origi...ntent=BarksBar You could also try those seat back organizers to see if one will give enough coverage to act as a protector |
02-19-2020, 12:52 PM | #4 | |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
Quote:
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
02-19-2020, 12:55 PM | #5 |
Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012
Location: Southeast, PA
Posts: 2,093
|
I'm looking for similar, the biggest problem that I seem to find is that they all cover the release for the seat back, and I still need access to that.
__________________
LS3 Crate Engine Swap | CSP Custom Cam 232/240 .615/.615 113 +3 | Stainless Power LT Headers | Z28 Intake | Borla S-Type Exhaust | FTI Triple-Disc Billet 3200 Stall
2012 Camaro 2SS/RS | 1968 Camaro SS | 2020 Cadillac CT5 Premium Luxury | 2021 Spark LS |
02-19-2020, 01:08 PM | #6 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
I know they are not the most attractive things out there, but looks like it would do the job for the OP:
https://www.amazon.com/Car-Seat-Back...26232611&psc=1
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
02-19-2020, 01:15 PM | #7 | |
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,155
|
Quote:
https://www.sportsmansguide.com/prod...unds?a=1795628 |
|
02-19-2020, 01:33 PM | #8 | |
Drives: 15 Camaro SS Join Date: Oct 2018
Location: Mountains of central PA
Posts: 1,442
|
Quote:
|
|
02-19-2020, 02:07 PM | #9 |
Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013
Location: Galion, Oh
Posts: 531
|
Same as posted above by infid3vil..Should do the trick..Just loosen the loop to hang it below the release.
Sent from my SM-G960U using Tapatalk
__________________
2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.
|
02-19-2020, 03:18 PM | #10 |
Drives: LT W/2LT,blue metallic Join Date: Jul 2016
Location: central florida
Posts: 4,915
|
|
02-20-2020, 06:20 AM | #11 |
Drives: '17 Corvette Grand Sport M7 Join Date: May 2012
Location: Pennsylvania
Posts: 3,748
|
Why not just tell the kid to stop kicking the seat? It always worked for my parents.
__________________
MY RIDE: 2017 CORVETTE GRAND SPORT--TRIPLE BLACK, 7 SPEED MANUAL, VARARAM TCR-7 INTAKE, BORLA CATLESS X-PIPE, CARBON FIBER STAGE 2 AERO, MGW SHORT-THROW SHIFTER
**SOLD**2011 TRIPLE BLACK SS CONVERTIBLE--6 SPEED MANUAL, MANY MODS, 455 RWHP/435 RWTQ DAD'S RIDE: 2012 ZL1 #1866--BLACK, 6 SPEED MANUAL, EXPOSED CF HOOD, POLISHED WHEELS, SUNROOF, ROTO-FAB INTAKE "Silly Americans, taking from the rich and giving to the poor only works in fairy tales. Success is earned here!". |
02-20-2020, 11:12 AM | #12 |
Using these in both of my cars:
Munchkin Brica Deluxe Kick Mats Car Seat Protector, Black, 2 Pack https://www.amazon.com/dp/B00B7M7CLA..._j3RtEb4TAZ4H5 No issues accessing the latch. Sent from my iPhone using Tapatalk Pro |
|
02-20-2020, 11:32 AM | #13 |
Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012
Location: Southeast, PA
Posts: 2,093
|
Thanks, just ordered those. Gonna give them a shot.
__________________
LS3 Crate Engine Swap | CSP Custom Cam 232/240 .615/.615 113 +3 | Stainless Power LT Headers | Z28 Intake | Borla S-Type Exhaust | FTI Triple-Disc Billet 3200 Stall
2012 Camaro 2SS/RS | 1968 Camaro SS | 2020 Cadillac CT5 Premium Luxury | 2021 Spark LS |
02-20-2020, 12:08 PM | #14 |
Drives: 2011 camaro 2 SS Join Date: Jun 2019
Location: peterborough ontario
Posts: 19
|
Seat protection
Thanks for the response guys. Defintley looks like the answer
|
|
|
|
|