You are browsing camaro5 
 |
|
09-27-2021, 05:18 PM
|
#1 |
 Drives: 2010 Camaro SS Join Date: Feb 2018
Location: Panama City, FL
Posts: 82
|
Harness bar, harnesses, rear seat delete and shifter
I’ve got a few odd items that I need to part with. All items will fit 5th gen Camaros.
Harness bar - $600 Sparco 4 point harnesses, driver and passenger side (good through 2022) - $100 Combine harnesses and bar - $650 Rear seat delete - $200 Hurst shifter - $100 Harness bar and harnesses were only mounted and removed, never used in new condition. Shifter was ran on the car for about 2 years, roughly 25k miles.
__________________
2010 Camaro 2SS/RS - 416 stroker, F1A-94 procharger, BTR blower cam, Big Red race valve, AGP intercooler, Alky dual nozzle kit, ZL1 fuel pump with DSX Aux pump, DSX flex fuel sensor, Bosch 210 injectors, Mcleod RXT1200 clutch, MGW flat stick, Tick Performance Level 3 trans, DSS 3.5 aluminum driveshaft, Strange S60 rear, DSS 1400hp axles, Texas speed 1 7/8 headers, X-pipe and MBRP muffler delete, BMR lowering springs, BMR trailing arms and toe rods, Poly motor mounts, RevShift trans mount instert, rear sub frame braces, Tuned by Joey at Pure Fabrication in Panama City, FL
|
|
|
|
09-27-2021, 06:02 PM
|
#2 |
    
Drives: 2012 Camaro SS Join Date: Dec 2019
Location: New York
Posts: 1,434
|
Location Florida
Booooooo
__________________
2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!
|
|
|
|
|
09-28-2021, 12:57 PM
|
#3 |
Drives: 2011 Chevrolet Camaro LS Join Date: Jun 2018
Location: St. Louis, Missouri
Posts: 58
|
Where'd you get that seat delete?
__________________
 "If you aren't first, you're last" -Ricky Bobby |
|
|
|
|
09-30-2021, 09:56 AM
|
#4 |
|
Drives: 2010 Camaro SS Join Date: Feb 2018
Location: Panama City, FL
Posts: 82
|
There's no markings on the delete but I believe it is an SMG kit. It was actually with the car when I purchased it but the guy had never installed it and I put the rear seat back in.
__________________
2010 Camaro 2SS/RS - 416 stroker, F1A-94 procharger, BTR blower cam, Big Red race valve, AGP intercooler, Alky dual nozzle kit, ZL1 fuel pump with DSX Aux pump, DSX flex fuel sensor, Bosch 210 injectors, Mcleod RXT1200 clutch, MGW flat stick, Tick Performance Level 3 trans, DSS 3.5 aluminum driveshaft, Strange S60 rear, DSS 1400hp axles, Texas speed 1 7/8 headers, X-pipe and MBRP muffler delete, BMR lowering springs, BMR trailing arms and toe rods, Poly motor mounts, RevShift trans mount instert, rear sub frame braces, Tuned by Joey at Pure Fabrication in Panama City, FL
|
|
|
|
|
10-03-2021, 03:18 PM
|
#5 |
|
Drives: 2010 Camaro SS Join Date: Feb 2018
Location: Panama City, FL
Posts: 82
|
Sold
__________________
2010 Camaro 2SS/RS - 416 stroker, F1A-94 procharger, BTR blower cam, Big Red race valve, AGP intercooler, Alky dual nozzle kit, ZL1 fuel pump with DSX Aux pump, DSX flex fuel sensor, Bosch 210 injectors, Mcleod RXT1200 clutch, MGW flat stick, Tick Performance Level 3 trans, DSS 3.5 aluminum driveshaft, Strange S60 rear, DSS 1400hp axles, Texas speed 1 7/8 headers, X-pipe and MBRP muffler delete, BMR lowering springs, BMR trailing arms and toe rods, Poly motor mounts, RevShift trans mount instert, rear sub frame braces, Tuned by Joey at Pure Fabrication in Panama City, FL
|
|
|
|
|
10-03-2021, 08:07 PM
|
#6 |
      
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
It’s all sold?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
10-03-2021, 11:34 PM
|
#7 |
|
Drives: 2010 Camaro SS Join Date: Feb 2018
Location: Panama City, FL
Posts: 82
|
Only thing left after tomorrow is the shifter.
__________________
2010 Camaro 2SS/RS - 416 stroker, F1A-94 procharger, BTR blower cam, Big Red race valve, AGP intercooler, Alky dual nozzle kit, ZL1 fuel pump with DSX Aux pump, DSX flex fuel sensor, Bosch 210 injectors, Mcleod RXT1200 clutch, MGW flat stick, Tick Performance Level 3 trans, DSS 3.5 aluminum driveshaft, Strange S60 rear, DSS 1400hp axles, Texas speed 1 7/8 headers, X-pipe and MBRP muffler delete, BMR lowering springs, BMR trailing arms and toe rods, Poly motor mounts, RevShift trans mount instert, rear sub frame braces, Tuned by Joey at Pure Fabrication in Panama City, FL
|
|
|
|
|
|
|
|
 |
|
|
