04-26-2013, 03:15 PM | #1 |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
PDIM Module
I am thinking of ordering the PDIM module for my car. Has anyone have problems with these, what all comes with it.
http://www.shopchevyparts.com/electr...-92252215.html I already have Wheel controls and the 3.5 jack. so i should be able to change this and just get it flashed with out a problem |
04-27-2013, 11:54 AM | #2 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,323
|
So i am going to guess that you do NOT currently have a USB port.....is this correct?
the link you posted has EVERYTHING you need to install the PDIM and the usb port, it has the harnesses. after they are installed, than you have to have your system flashed. IF you already have the pdim/usb port are just buying this PDIM as an upgrade to get a newer version of the Hardware/Software, then all you need is the PDIM (GM P/N #22797218)....Then just swap out the two PDIM's and you are ready to go as its a total P-N-P no flash is required.
__________________
|
04-27-2013, 02:32 PM | #3 | |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
Quote:
|
|
04-27-2013, 03:52 PM | #4 |
|
If you end up just buying the module I have the wire harness and outlets that go in console.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
04-27-2013, 10:14 PM | #5 |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
|
04-28-2013, 10:31 AM | #6 |
|
Amazon.com has just the module only, was looking at it myself to upgrade my existing PDIM
The important thing is if you are going to go through this is to be sure to get the PDIM with part number 22797218. Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
04-28-2013, 07:29 PM | #7 |
NFRNO SS
|
I just purchased this from shopchevyparts.com, as they currently have the lowest price around for this kit. I plan on doing the install myself, then taking it to my dealer for the software upgrade.
|
04-29-2013, 07:32 AM | #8 | |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
Quote:
Whats the difference between this part http://www.amazon.com/ACDelco-227972.../dp/B0055B0QUS and this one http://www.shopchevyparts.com/electr...-92252215.html i am confuse now. |
|
04-29-2013, 07:47 AM | #9 | |
|
Quote:
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
|
04-29-2013, 08:50 AM | #10 | |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
Quote:
Was there a upgrade that we don't know about. i'm looking to order this today i'll look it up and see what i can find |
|
04-29-2013, 10:45 AM | #11 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,323
|
TheShowStopperLFX, for reasons unknown to us, AND some of the folks at Chevrolet Customer Svc, they have not updated the PDIM data base in a LONG time, thus soime dealers will only install what they see in the data base and nothing more. Actually they look at it as a safety net, so if something goes wrong, they won't be at fault. We got the P/N (22797218) from a previous Chevrolet Customer Service rep here on the forum. it WILL work in your car, and will give you the latest/greatest HW/SW versions available. which is DB/DD the P/N you are looking to get will get you the DB/DB HW/SW versions. I did this upgrade nearly two and a half years ago....and my dealer doesn't have their head up someones butt.....thus they installed the 22797218 P/N inder warrante and I have haver had an issue, AND it fixed all of my problems. Here is a screen shot of my cars display.
__________________
|
04-29-2013, 11:46 AM | #12 | |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
Quote:
|
|
04-29-2013, 12:00 PM | #13 |
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
|
04-29-2013, 01:00 PM | #14 | |
Wicked ZL1
|
Quote:
__________________
2017 Hyper Blue Metallic ZL1 A10/CF Hood Insert/PDR/NAV MODS: Rotofab CAI/V-MAX CNC Ported Throttle Body/Clear Bra/LED Reverse Light/Rock Guards/Lift Pads/Darkened Tail Lights/Ghost-Tinted LED Side Markers/Darkened 3rd Brake Light
Last edited by FLYNNZL1; 04-29-2013 at 02:26 PM. |
|
|
|
|
|