06-09-2012, 07:41 AM | #1 |
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Rubber build up at the track
Whats your solution for rubber build up when you hit the track? I used to use the blue tape, but in photos it looks like crap. Any other solutions
|
06-09-2012, 07:52 AM | #2 |
Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011
Location: ROCKMART, GA
Posts: 2,185
|
Geddex burnout guard.... Pam cooking spray
|
06-09-2012, 08:04 AM | #3 |
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
I just orders some of that from Jegs, but wasn't sure if it would work well. I use Pan on everything, 4wheelers, tractors, steaks, ect..... didnt want to put in on the car, but its worth a try i guess.
|
06-09-2012, 08:14 AM | #4 |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
I put on the zl1 splash guards and made some for the fronts. That helped a ton. I also have xpel clear guard on the gills and behind the rear wheels to protect the paint.
A few Weeks ago at the track this guy with a Lotus was using clear vehicle wrap that held up the whole day. It was amazing how dirty it got by the end. Sent from my DROID RAZR using Tapatalk
__________________
|
06-09-2012, 08:17 AM | #5 |
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
appreciate it. I'll have to look into it
|
06-09-2012, 10:53 PM | #6 |
Back on the dino-juice
Drives: '10 LS + a few more Join Date: May 2010
Location: Texas
Posts: 1,641
|
vaseline
__________________
I wake up in the morning and I piss excellence.
-Ricky Bobby America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936 |
06-10-2012, 05:26 AM | #7 |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Nice coating of Pledge and don't wipe it off... leaves your car lemony fresh! After the track it all washes off...
__________________
|
06-14-2012, 03:57 PM | #8 |
Drives: 2017 HBM A10 ZL1 Join Date: Feb 2011
Location: Jacksonville FL
Posts: 1,205
|
Pam works just fine.
__________________
My build thread http://www.camaro5.com/forums/showthread.php?t=224342
Go is good. Stop is better. |
06-14-2012, 05:24 PM | #9 |
Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,127
|
I use the wide blue painter's tape.
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread |
06-14-2012, 05:57 PM | #10 |
Fastest V6
Drives: 2010 CGM 2LT/RS 06 G6 GTP conv. Join Date: Mar 2010
Location: Bensalem PA
Posts: 314
|
Would any of that rubber be from your new slicks ?
__________________
1/4 Mile 11.841 at 113.98mph SEPA5 /TEAM LLT |
06-17-2012, 04:12 PM | #11 |
|
I had the guy who does my business cards print of some of these on a peel and stick plastic that I throw away after each night at the track. It protects from stone chips too and looks good.
before after before again |
06-17-2012, 05:29 PM | #12 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,221
|
I think some folks also use WD40.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
06-17-2012, 07:27 PM | #13 |
www.1baddogracing.com
Drives: 2010 IOM 2SS/RS Auto Join Date: Apr 2011
Location: Indian Land, SC
Posts: 998
|
WD40 will help remove. The new Mothers R3 Racing Rubber Remover works well too.
I did not like burnout guard and I hated the painters tape in pictures. I have not tried Pam or Pledge yet. The other one is to put a coat of wax and let it haze and not remove it until it's time to remove the rubber. I like Allan's idea.
__________________
2010 Camaro 2SS/RS Aqua Blue Metalllic (bolt-ons)
2020 Camaro 2SS/RS Satin Steel Metallic - Shock and Steel Edition 1 of 98 - A10 (bolt-ons) 2010 Camaro 2SS/RS IOM - 1,023 RWHP 813RWTQ (Previous Paxton Record Holder: 9.82@139) Built and Tuned by Heintz Racing Go: DSS 9", RPM Trans TH400, Carlyle Racing 15" Conversion, ECS Vortech YSI-B, Fore Fuel System, ID1700, Gall Racing 427 C.I LSX, Mast 285CC Heads, HR Custom Cam Show: Custom Painted Stripes/Badges (Orange Pearl over White), Z/TA Spoiler, VFN Hood, Weld Wheels http://www.HeintzRacing.com http://www.youtube.com/user/1baddogracing |
06-17-2012, 07:41 PM | #14 |
Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,127
|
What slicks (whistles non chalantly as he walks away).
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread |
|
|
|
|