(VIDEO) Hand / Parking / E Brake Not working - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rtist · 03-23-2018, 01:51 AM

As you can see from the video below. There is no tension on the Ebrake whatsoever. At first I thought the issue might be a simple fix. So i adjusted the Ebrake by removing the Rotors and adjusting the spring tension there. But no luck.

https://youtu.be/FAe2tQ8qdhc

Any ideas??

Any help would be appreciated. Thank You!

1Coopgt · 03-24-2018, 10:49 AM

Did you check the e-brake cable at both ends from the handle to your rear brakes. Is it attached to every thing. Did the cable snap some where down there.

rtist · 03-24-2018, 09:58 PM

Quote:

Originally Posted by 1Coopgt

Did you check the e-brake cable at both ends from the handle to your rear brakes. Is it attached to every thing. Did the cable snap some where down there.

I believe it might have snapped. However, I haven't checked them as I've heard I need to remove the exhaust, heatsink and that it'll be near the drive shaft. Would you happen to know if that's true?

1Coopgt · 03-26-2018, 02:41 PM

To be honest I don't know . You had the E-BRAKE handle unbolted from the tunnel so you could have at least check at the handle end and tried pulling the cable up through the floor if it was attached to the handle.

03-23-2018, 01:51 AM	#1
rtist Drives: 2012 Camaro Lt Join Date: Jul 2017 Location: Washington Posts: 22	(VIDEO) Hand / Parking / E Brake Not working As you can see from the video below. There is no tension on the Ebrake whatsoever. At first I thought the issue might be a simple fix. So i adjusted the Ebrake by removing the Rotors and adjusting the spring tension there. But no luck. https://youtu.be/FAe2tQ8qdhc Any ideas?? Any help would be appreciated. Thank You! __________________ Upload all your photos for free at www.fb.pics . For Free : No Charge : No Subscriptions

03-24-2018, 10:49 AM	#2
1Coopgt Drives: All Black 2012 1LS Join Date: Feb 2015 Location: Rochester,NY Posts: 2,042 View My Garage	Did you check the e-brake cable at both ends from the handle to your rear brakes. Is it attached to every thing. Did the cable snap some where down there. __________________ Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.

03-26-2018, 02:41 PM	#4
1Coopgt Drives: All Black 2012 1LS Join Date: Feb 2015 Location: Rochester,NY Posts: 2,042 View My Garage	To be honest I don't know . You had the E-BRAKE handle unbolted from the tunnel so you could have at least check at the handle end and tried pulling the cable up through the floor if it was attached to the handle. __________________ Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.