Front and rear crash bars - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

white1LE · 11-23-2015, 05:22 PM

Derailed!! Let's get back to those amazingly safe and beautiful looking crash bars!!

2013 ZL1 #7860 · 11-23-2015, 06:51 PM

Quote:

Originally Posted by Crash76

Im a Paramedic, seen a lot of vehicle accidents... adults and kids killed and injured.

Since we are talking safety, i personally don't care if you are alone in the vehicle... I think it is responsible to inform anyone that you modified the crash bumpers... let them make an informed decision...

Im also for letting people deciding to wear safety equipment or not... but they should be personally and fiscally liable for their injury because they did not wear recommended safety equipment.

Crash and injured ? no seat belt? you are 100% liable for injuries u sustained. 50% if the accident is not your fault. No questions asked done.

Law Enforcement should not even care if you wear your seat belt unless you are a minor.

Insurance should not be required to pay for someone not using a basic / recommended piece of safety equipment.

Same with fatties and smokers... people know that being obese and smoking are extremely dangerous for you in long term health.

But that is another discussion

Makes sense you are from California...

Cornercarver · 07-18-2017, 08:32 PM

I Would like pricing and availability on your crash bars

2NASSTY · 07-19-2017, 07:51 AM

Me too!

krisprz2010camaross · 10-20-2017, 08:04 PM

Anyone know where to get these or even aluminum ones? Very interested!

DrkPhx · 10-20-2017, 11:14 PM

Quote:

Originally Posted by krisprz2010camaross

Anyone know where to get these or even aluminum ones? Very interested!

Pete from JPSS sells aluminum ones.

krisprz2010camaross · 10-20-2017, 11:27 PM

Quote:

Originally Posted by DrkPhx

Pete from JPSS sells aluminum ones.

Is he still active on the forums?

hammdo · 10-20-2017, 11:41 PM

JusticePete sure is...

-Don

Jayjellyfish212 · 10-21-2017, 12:17 AM

These crash bars are sweet! I'm interested too. Been debating on building my own. If
the cost is near same as what it would cost to build I would order these . These guys putting these down really need to take a look at really fast cars. They are built entirely out of carbon fiber. Every body part frame and crash system etc. So I do not see how the factory ones are better than these. These actually look more safe. I would probably go with a little bigger diameter tube though just in preference.

krisprz2010camaross · 10-21-2017, 03:20 AM

Quote:

Originally Posted by hammdo

JusticePete sure is...

-Don

Just sent him a message. Thanks!

krisprz2010camaross · 10-21-2017, 03:22 AM

Quote:

Originally Posted by Jayjellyfish212

These crash bars are sweet! I'm interested too. Been debating on building my own. If
the cost is near same as what it would cost to build I would order these . These guys putting these down really need to take a look at really fast cars. They are built entirely out of carbon fiber. Every body part frame and crash system etc. So I do not see how the factory ones are better than these. These actually look more safe. I would probably go with a little bigger diameter tube though just in preference.

They really do look awesome and lightweight. They look pretty safe to me. I doubt they are less safe than the OEM ones. Bigger diameter tube would be even better.

AG1LE · 10-21-2017, 07:50 AM

Interested, if anyone finds a place to have these titanium pieces made.

krisprz2010camaross · 10-22-2017, 10:46 AM

For people interested I talked to Pete from JPSS and they still make the aluminum crash bars front and rear. Here’s the link. They are pretty pricey. I can’t imagine how much the titanium are. Lol
http://www.jpssonline.com/p-57-2010-...s-by-jpss.aspx

AG1LE · 10-22-2017, 11:48 AM

I'm in communication with Unobtanium Welding, which is the shop that made the titanium bars in the original post in this thread. I plan to purchase a set.

I encourage anyone who's interested to contact them directly (very responsive via the FB page).

11-23-2015, 05:22 PM	#29
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	Derailed!! Let's get back to those amazingly safe and beautiful looking crash bars!! __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp

07-19-2017, 07:51 AM	#32
2NASSTY Drives: 2014 M6 ZL1 Join Date: Jan 2012 Location: Tarpon Springs, Fl Posts: 772	Me too! __________________ 15' Ashen Gray Metallic Z/28 14' Crystal Red Tintcoat ZL1 6M, 9.62 at 150.75 MPH 12' Opulent Blue Metallic CTS-V Sedan, 10.690 at 129.60 MPH - SOLD 06' LeMans Blue Metallic Z06, 11.726 at 127.80 MPH Motor - SOLD. 96' Impala SS LTx, 11.397 at 118.10 MPH Motor, 1st stage 10.526 at 127.46 MPH

10-20-2017, 08:04 PM	#33
krisprz2010camaross Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014 Location: Yorba Linda, California Posts: 1,564	Anyone know where to get these or even aluminum ones? Very interested! __________________ YouTube:Krisprz garage Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez

10-20-2017, 11:41 PM	#36
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	JusticePete sure is... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

10-21-2017, 12:17 AM	#37
Jayjellyfish212 Drives: 2014 1LE Join Date: Aug 2015 Location: Upstate NY Posts: 2,050 View My Garage	These crash bars are sweet! I'm interested too. Been debating on building my own. If the cost is near same as what it would cost to build I would order these . These guys putting these down really need to take a look at really fast cars. They are built entirely out of carbon fiber. Every body part frame and crash system etc. So I do not see how the factory ones are better than these. These actually look more safe. I would probably go with a little bigger diameter tube though just in preference. __________________ Car mods: never enough!

07-18-2017, 08:32 PM	#31
Cornercarver Account Suspended Drives: 2011 2SS/RS M6 Join Date: Feb 2015 Location: Kansas City Posts: 83 View My Garage	I Would like pricing and availability on your crash bars

10-21-2017, 07:50 AM	#40
AG1LE Drives: '14 1LE Join Date: Nov 2013 Location: NJ Posts: 2,435	Interested, if anyone finds a place to have these titanium pieces made.

10-22-2017, 10:46 AM	#41
krisprz2010camaross Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014 Location: Yorba Linda, California Posts: 1,564	For people interested I talked to Pete from JPSS and they still make the aluminum crash bars front and rear. Here’s the link. They are pretty pricey. I can’t imagine how much the titanium are. Lol http://www.jpssonline.com/p-57-2010-...s-by-jpss.aspx __________________ YouTube:Krisprz garage Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez

10-22-2017, 11:48 AM	#42
AG1LE Drives: '14 1LE Join Date: Nov 2013 Location: NJ Posts: 2,435	I'm in communication with Unobtanium Welding, which is the shop that made the titanium bars in the original post in this thread. I plan to purchase a set. I encourage anyone who's interested to contact them directly (very responsive via the FB page).