You are browsing camaro5 
 |
|
05-06-2017, 01:13 PM
|
#1 |
 
Drives: 2012 Camaro SS Transformer Join Date: Sep 2013
Location: St Louis Missouri
Posts: 501
|
Help - codes after headers / Solos
Just installed JBA shorties and Solo HFCs. Battery disconnected for 3 days during install.
After only a couple short drives getting a "service stabilitrak" light. Also CEL. 1. Mods unrelated to stabilitrak so why?? 2. CEL wouldn't come on because of stabilitrak problem correct?? Going to go get codes readout.
__________________
2012 Camaro SS Transformer
Mods: trunk subwoofer and amp, LED lighting (fogs, interior, trunk), skip shift eliminator, CAI cold air kit, Vmax ported throttle body, Stainless Works retro chambered cat back, JBA Cat4ward SS ceramic coated headers Potential Next Mods: Tune, F&R sway bars, rear cradle bushing inserts and trailing arms |
|
|
|
05-06-2017, 02:08 PM
|
#2 |
         
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
Check for a cracked a spark plug?
It's a common problem after a header install. Reseat the spark plug wires on both ends. Check all sensors that you had to unplug for the install. I would assume that you removed the plugs for the shorty install for more working room, butt it's worth checking at least.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
05-06-2017, 02:13 PM
|
#3 |
Drives: 2012 M6 Camaro SS (RIP) Join Date: Nov 2014
Location: Virginia
Posts: 1,684
|
This happened to me after my header install
#8 had a cracked spark plug, car was running like an old dog, but I changed my plugs and everything went away
__________________
Speed engineering 1 7/8 LTs, CAI inc Cold Air Intake, offroad connectors, Solo performance axle back with J pipes, tune, and in need of a driver mod LOL
|
|
|
|
|
05-06-2017, 02:14 PM
|
#4 |
|
Drives: 2012 M6 Camaro SS (RIP) Join Date: Nov 2014
Location: Virginia
Posts: 1,684
|
Also check your MAF
Embarrassingly I forgot to plug mine back in after install
__________________
Speed engineering 1 7/8 LTs, CAI inc Cold Air Intake, offroad connectors, Solo performance axle back with J pipes, tune, and in need of a driver mod LOL
|
|
|
|
|
05-06-2017, 03:35 PM
|
#5 |
|
Drives: 2012 Camaro SS Transformer Join Date: Sep 2013
Location: St Louis Missouri
Posts: 501
|
Fixed hopefully for good.
Codes said bad engine data and misfire on 8. Some newbie idiot (ok it was me) didn't get 8 plug wire on right. Bad engine data rippled into ABS and stabilitrak which I thought was odd. But in any case connected plug wire well and issue gone. Just disconnected battery to clear CEL and hopefully Solos won't cause one.
__________________
2012 Camaro SS Transformer
Mods: trunk subwoofer and amp, LED lighting (fogs, interior, trunk), skip shift eliminator, CAI cold air kit, Vmax ported throttle body, Stainless Works retro chambered cat back, JBA Cat4ward SS ceramic coated headers Potential Next Mods: Tune, F&R sway bars, rear cradle bushing inserts and trailing arms |
|
|
|
|
|
|
|
 |
|
|
