Lingenfelter Performance Engineering Customers - Page 218 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mws444 · 04-06-2010, 04:24 PM

Blue..that magliglite is too cool to use...I am talking display case here!

JusticePete · 04-06-2010, 04:25 PM

Quote:

Originally Posted by paul2010

I know what you mean it's gonna be tough but I think we'll have to try to deal with it. I still have to make sure my truck will pull this ok before I make it a done deal.

What kind of truck do you have?

mws444 · 04-06-2010, 04:25 PM

Sweet trailer Paul!! I smell a Duramax in your future.

Speed74SS · 04-06-2010, 04:58 PM

Sweet trailer Paul2010!! That would be an awesome hauler.

I ordered some Hawk Brake Pads, Motul RBF600 Brake Fluid and some Nitto NT05 Tires today. I got 275x40x20's for the front and 315x35x20's for the rear. I would like to run 295's all around but haven't found any tires in that size that I like yet.

I also ordered a CG Lock for my drivers side seat belt to use at the track. It seems like a good alternative to a full out racing harness right now. Check it out. http://www.soloracer.com/cglock.html

RS-SS2 · 04-06-2010, 05:21 PM

Paul, That is sweet.

I think you have enough room in there to swing by and pick me up before you head to Georgia.

paul2010 · 04-06-2010, 05:29 PM

I have an 08 3/4 ton crewcab Duramax with the allison tranny. I think it will probably do ok but I need to hook it up and try it. I bought my boat in Cape Cod and on the way home I had to take an alternate route because my truck couldn't pull the boat through the mountains so I will have to see.

paul2010 · 04-06-2010, 05:36 PM

Did you guys see the new hoods and front ends? My car is going to be a model at the ACS tent.
http://www.camaro5.com/forums/showthread.php?t=75064

paul2010 · 04-06-2010, 05:48 PM

Quote:

Originally Posted by Speed74SS

Sweet trailer Paul2010!! That would be an awesome hauler.

I ordered some Hawk Brake Pads, Motul RBF600 Brake Fluid and some Nitto NT05 Tires today. I got 275x40x20's for the front and 315x35x20's for the rear. I would like to run 295's all around but haven't found any tires in that size that I like yet.

I also ordered a CG Lock for my drivers side seat belt to use at the track. It seems like a good alternative to a full out racing harness right now. Check it out. http://www.soloracer.com/cglock.html

Your gonna love those tires. I wanted to get them but they didn't have the size that I needed.

Speed74SS · 04-06-2010, 05:54 PM

Quote:

Originally Posted by paul2010

Did you guys see the new hoods and front ends? My car is going to be a model at the ACS tent.
http://www.camaro5.com/forums/showthread.php?t=75064

Those are some pretty sweet pieces!! I saw you put your name in for their booth. They are pretty lucky to have your car as a show car - it is going to look great.

Speed74SS · 04-06-2010, 06:00 PM

I can't believe the C5Fest is next week already - its going to be a lot of fun!!

paul2010 · 04-06-2010, 06:03 PM

Quote:

Originally Posted by Speed74SS

I can't believe the C5Fest is next week already - its going to be a lot of fun!!

Yeah I know I am going to stop driving my car on Monday and have my mechanic take the wheels off, strip her down and detail her real good pull it in the trailer and leave it until I leave thursday.

paul2010 · 04-06-2010, 06:05 PM

When are you picking up your car speed?

Speed74SS · 04-06-2010, 06:21 PM

Quote:

Originally Posted by paul2010

When are you picking up your car speed?

I am going to pick it up on Thursday morning. I think I am going to hit the caravan coming from MI and meet at Beaverdam, OH at 12:30pm on Thursday. When are you going to leave?

paul2010 · 04-06-2010, 06:48 PM

Quote:

Originally Posted by Speed74SS

I am going to pick it up on Thursday morning. I think I am going to hit the caravan coming from MI and meet at Beaverdam, OH at 12:30pm on Thursday. When are you going to leave?

I am leaving on thursday also. I might have follow you if I can keep up in my duramax and oversized trailer.

04-06-2010, 04:24 PM	#3039
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Blue..that magliglite is too cool to use...I am talking display case here! __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

04-06-2010, 04:25 PM	#3041
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Sweet trailer Paul!! I smell a Duramax in your future. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

04-06-2010, 04:58 PM	#3042
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Sweet trailer Paul2010!! That would be an awesome hauler. I ordered some Hawk Brake Pads, Motul RBF600 Brake Fluid and some Nitto NT05 Tires today. I got 275x40x20's for the front and 315x35x20's for the rear. I would like to run 295's all around but haven't found any tires in that size that I like yet. I also ordered a CG Lock for my drivers side seat belt to use at the track. It seems like a good alternative to a full out racing harness right now. Check it out. http://www.soloracer.com/cglock.html __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

04-06-2010, 05:21 PM	#3043
RS-SS2 Drives: 2010 Camaro, 09 mini, 01 3500 Join Date: Aug 2009 Location: Albuquerque Posts: 377 View My Garage	Paul, That is sweet. I think you have enough room in there to swing by and pick me up before you head to Georgia. __________________ Beware of the LPE Brotherhood

04-06-2010, 05:29 PM	#3044
paul2010 Drives: 2012 ZL1 #1278 Join Date: Aug 2009 Location: Indiana Posts: 1,213 View My Garage	I have an 08 3/4 ton crewcab Duramax with the allison tranny. I think it will probably do ok but I need to hook it up and try it. I bought my boat in Cape Cod and on the way home I had to take an alternate route because my truck couldn't pull the boat through the mountains so I will have to see. __________________ 2012 ZL1 #1278 2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout

04-06-2010, 05:36 PM	#3045
paul2010 Drives: 2012 ZL1 #1278 Join Date: Aug 2009 Location: Indiana Posts: 1,213 View My Garage	Did you guys see the new hoods and front ends? My car is going to be a model at the ACS tent. http://www.camaro5.com/forums/showthread.php?t=75064 __________________ 2012 ZL1 #1278 2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout

04-06-2010, 06:00 PM	#3048
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	I can't believe the C5Fest is next week already - its going to be a lot of fun!! __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

04-06-2010, 06:05 PM	#3050
paul2010 Drives: 2012 ZL1 #1278 Join Date: Aug 2009 Location: Indiana Posts: 1,213 View My Garage	When are you picking up your car speed? __________________ 2012 ZL1 #1278 2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 07:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 07:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 10:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 02:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 01:15 PM