You are browsing camaro5 
 |
|
07-21-2018, 08:10 AM
|
#1 |
 Drives: 13 ss Join Date: Oct 2017
Location: Martinsburg
Posts: 15
|
2011 struts on a 2013 Camaro ss
I have a 2013 camaro found a set of low mile struts from a 2011 will they work?
|
|
|
|
07-21-2018, 01:23 PM
|
#2 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,061
|
Upper End link hole my be larger on the 13 vs the 11.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
07-21-2018, 08:05 PM
|
#3 |
|
USA-1
|
That's a downgrade man...
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
|
|
|
|
08-07-2018, 08:56 AM
|
#4 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,858
|
Chevy did improve the damping on the 2012 SS (FE3) struts. But many of the 2011 SS's that were later in the year builds got them as well.
Check the part numbers on your current struts and compare them to the ones you're looking at. They could be the same. 
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
