how many of you......... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

lakersftbl69 · 07-17-2013, 07:44 PM

how many of you are running 575-600 rwhp with out being forged and on a stock block with out issues. im really considering going FI and looking to do that power just looking to see how everyones car is holding up.

old motorhead · 07-17-2013, 07:57 PM

Quote:

Originally Posted by lakersftbl69

how many of you are running 575-600 rwhp with out being forged and on a stock block with out issues. im really considering going FI and looking to do that power just looking to see how everyones car is holding up.

650ish rwhp with TVS, bolt ons, mild blower cam, and a little over 9psi. Been running that way for over 4 years and 30K miles (vette M6 LS3). The key is plenty of fuel and a good tune. It also helps if you're not a dumb mullet hell bent on tearing stuff up

dan0617 · 07-17-2013, 08:05 PM

I'm running 12 psi and a 100 shot on a bone stock L99 with headers. Should be 625 to 650 rwhp through the auto. It's all in the (Jannetty) tune to make it live. A good tuner will make that power feel like stock when not at WOT and make it live a long time.

Unreal · 07-17-2013, 08:07 PM

9-10psi, stock l99 AGP twin turbo, 650-680rwhp, 14k miles no issues. Now added heads/cam and makes more power, probably 750rwhp or so, no issues. 91 octane, no meth.

calbert1999 · 07-17-2013, 08:31 PM

Just a matter of time and all these bone stock engines will be busted up to bits.

old motorhead · 07-17-2013, 08:43 PM

Quote:

Originally Posted by calbert1999

Just a matter of time and all these bone stock engines will be busted up to bits.

Or maybe, just maybe they will last a long time and give lots of enjoyment to the guys that can make it work. If mine shoots craps tomorrow, I'm calling it good. It just might last quite a bit longer too

Unreal · 07-17-2013, 08:47 PM

Same can be said for a bone stock car.

dan0617 · 07-17-2013, 08:51 PM

Quote:

Originally Posted by calbert1999

Just a matter of time and all these bone stock engines will be busted up to bits.

True. And it's just a matter of time till all we own is a 8' x 3' piece of land and a rock with our name on it.

Blackkaz04 · 07-17-2013, 08:54 PM

this thread has been done....ALOT

old motorhead · 07-17-2013, 08:54 PM

Quote:

Originally Posted by dan0617

True. And it's just a matter of time till all we own is a 8' x 3' piece of land and a rock with our name on it.

Attababy! That's it in a nutshell. If you live, paralyzed by the thought of your next potential failure.....not much of a life

realcanuk · 07-17-2013, 09:00 PM

Quote:

Originally Posted by old motorhead

Attababy! That's it in a nutshell. If you live worried about your next failure.....not much of a life

Well said.....

I ran 600rwhp on the stock engine for 2 years and more 1/4 mile passes than I can count. I went with a forged short block and my original engine is still running fine in a drift car now.

ZOOK · 07-17-2013, 09:04 PM

Did the Street Brawler Package from Jannetty 2 years ago ..34k on the car and going strong ....I did the work and Ted did the remote tune..........A lot of it's in the tuner..

lakersftbl69 · 07-17-2013, 09:27 PM

thanks guys for the info I appreciate it alot

Slickcas · 07-17-2013, 09:47 PM

After lowering the boost a little I am at 624rwhp and the motor has not missed a beat. A BIG key is tune of corse but do not over rev. the thing. I seen a few LS motors that would have lasted a long time but there tard owner took it to 6800 every shift. A stock bottom end will only last so long at them RPMs.

07-17-2013, 07:44 PM	#1
lakersftbl69 Drives: 2010 camaro ss Join Date: Mar 2009 Location: conway sc. Posts: 1,435 View My Garage	how many of you......... how many of you are running 575-600 rwhp with out being forged and on a stock block with out issues. im really considering going FI and looking to do that power just looking to see how everyones car is holding up. __________________ ordered dec 15 2008 picked up on june 8 2009. upgrades kooks 1 7/8" LTH w/ deleted cats, corsa exhaust, hurst short throw shifter stage 3 comp cam, 3.91 gears ecs kit blower, meth injection, upgraded axles, drive shaft, McLeod rxt clutch, fully forged 416ci stroker all installed and dyno tuned by slowhawk performance in bridgewater ma.

07-17-2013, 08:05 PM	#3
dan0617 Drives: 2011 Inferno Orange SS Convertible Join Date: Apr 2012 Location: Tyrone, PA Posts: 640 View My Garage	I'm running 12 psi and a 100 shot on a bone stock L99 with headers. Should be 625 to 650 rwhp through the auto. It's all in the (Jannetty) tune to make it live. A good tuner will make that power feel like stock when not at WOT and make it live a long time. __________________ 2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.

07-17-2013, 08:07 PM	#4
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	9-10psi, stock l99 AGP twin turbo, 650-680rwhp, 14k miles no issues. Now added heads/cam and makes more power, probably 750rwhp or so, no issues. 91 octane, no meth. __________________ Nick Corvette Z06 -1200ish rwhp

07-17-2013, 08:47 PM	#7
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	Same can be said for a bone stock car. __________________ Nick Corvette Z06 -1200ish rwhp

07-17-2013, 09:04 PM	#12
ZOOK Drives: 2010 2ss 6 speed Join Date: Apr 2011 Location: NEW BRUNSWICK CANADA Posts: 328	tvs 2300 Did the Street Brawler Package from Jannetty 2 years ago ..34k on the car and going strong ....I did the work and Ted did the remote tune..........A lot of it's in the tuner..

07-17-2013, 08:31 PM	#5
calbert1999 Camaro SS Lover Drives: 2010 Camaro 2SS/RS Black IOM Join Date: Jun 2010 Location: Toronto, Ontario (Canada) Posts: 2,863	Just a matter of time and all these bone stock engines will be busted up to bits.

07-17-2013, 08:54 PM	#9
Blackkaz04 Drives: 2006 Z06 Join Date: Sep 2010 Location: DC area Posts: 859	this thread has been done....ALOT

07-17-2013, 09:27 PM	#13
lakersftbl69 Drives: 2010 camaro ss Join Date: Mar 2009 Location: conway sc. Posts: 1,435 View My Garage	thanks guys for the info I appreciate it alot __________________ ordered dec 15 2008 picked up on june 8 2009. upgrades kooks 1 7/8" LTH w/ deleted cats, corsa exhaust, hurst short throw shifter stage 3 comp cam, 3.91 gears ecs kit blower, meth injection, upgraded axles, drive shaft, McLeod rxt clutch, fully forged 416ci stroker all installed and dyno tuned by slowhawk performance in bridgewater ma.

07-17-2013, 09:47 PM	#14
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	After lowering the boost a little I am at 624rwhp and the motor has not missed a beat. A BIG key is tune of corse but do not over rev. the thing. I seen a few LS motors that would have lasted a long time but there tard owner took it to 6800 every shift. A stock bottom end will only last so long at them RPMs.