[Petrol Head]

Originally Posted by KILLA BEE

Installed the much cheaper mbrp black series and so mad I spent all that money on the borka atak on my pror build. This thing is SERIOUS

Man that looks awesome!! How's the sound and performance? Did you originally have the factory dual mode exhaust?

[Nothing like an SS]

Spent the weekend trying out my new quickjacks and installing my GM gen 2 skirts. Thanks to members who helped my track down install instructions for these!
I never would have figured the install out on my own, so many rivets, adhesives, primers! lol

[Petrol Head]

Originally Posted by Nothing like an SS

Spent the weekend trying out my new quickjacks and installing my GM gen 2 skirts. Thanks to members who helped my track down install instructions for these!
I never would have figured the install out on my own, so many rivets, adhesives, primers! lol

Do the quick jacks require a perfectly flat, level floor or can there be a little grade to it? My garage floor is graded from all corners inward toward the center just slightly for the center floor drain.

[Nothing like an SS]

Originally Posted by Petrol Head

Do the quick jacks require a perfectly flat, level floor or can there be a little grade to it? My garage floor is graded from all corners inward toward the center just slightly for the center floor drain.

They recommend no grade at all, although depending on how slight, forward to back may not be an issue. Side to side might make them unstable. As you are four corners all going inward, not sure how that would work.

They are about 75" long, so see how much grade you have over that distance maybe? If they would be fairly level then you should be good. 75" piece of lumber see how much would lose contact?

[S.Macias]

I have absolutely no upholstery talent but was somehow able to put together two seat belt stalk covers with black leather vinyl I had laying around. Cost nothing but an hour of time compared to the $75 RedlineGoods wanted.



Before and after.

[BLACK21SS]

Rainy season here, and I want to drive it. Had some Continental EXTREMECONTACT DWS 06 Plus installed this morning.

All in with road hazard, $1099.

[IMG][/IMG]

[Nothing like an SS]

Originally Posted by BLACK21SS

Rainy season here, and I want to drive it. Had some Continental EXTREMECONTACT DWS 06 Plus installed this morning.

All in with road hazard, $1099.

[IMG][/IMG]

Let us know how you like those tires. Planning on those for my second set, I have spare wheels, just deciding what tire to run when I am not running GYSC3s, like when very rainy! lol

[BLACK21SS]

Originally Posted by Nothing like an SS

Let us know how you like those tires. Planning on those for my second set, I have spare wheels, just deciding what tire to run when I am not running GYSC3s, like when very rainy! lol

Will do. I'll be putting on about 200 miles tomorrow.

[craigss50]

Originally Posted by S.Macias

I have absolutely no upholstery talent but was somehow able to put together two seat belt stalk covers with black leather vinyl I had laying around. Cost nothing but an hour of time compared to the $75 RedlineGoods wanted.



Before and after.

Nice clean look. Well done.

[MR2Aaron]

Originally Posted by Nothing like an SS

Spent the weekend trying out my new quickjacks and installing my GM gen 2 skirts. Thanks to members who helped my track down install instructions for these!
I never would have figured the install out on my own, so many rivets, adhesives, primers! lol

What arrangement of adapters and the rubber blocks did you need to use the Quickjack?

It looks like the jack points are way up inside a piece of bodywork, and the rubber blocks that mine came with may not be enough on their own.

[Chevelle vs Camaro]

Originally Posted by Nothing like an SS

Spent the weekend trying out my new quickjacks and installing my GM gen 2 skirts. Thanks to members who helped my track down install instructions for these!
I never would have figured the install out on my own, so many rivets, adhesives, primers! lol

Is that the SLX 5000? Looks like you used the rear and center loft points. Was it sturdy?


Sent from my iPhone using Tapatalk

[Chevelle vs Camaro]

Did a waterless wash with Ammo Frothe. Finished her off with some Meguiars Ceramic Quick detailer











Sent from my iPhone using Tapatalk

[Nothing like an SS]

Originally Posted by MR2Aaron

What arrangement of adapters and the rubber blocks did you need to use the Quickjack?

It looks like the jack points are way up inside a piece of bodywork, and the rubber blocks that mine came with may not be enough on their own.

I have the ZL1 addons magnetic adapters and pucks, those along with the medium blocks that came with the jacks, gets me well clear of the body for lifting.

Detail, you can see the bottom of the puck

[Nothing like an SS]

Originally Posted by Chevelle vs Camaro

Is that the SLX 5000? Looks like you used the rear and center loft points. Was it sturdy?


Sent from my iPhone using Tapatalk

That is the BL-5000EXT, it is very sturdy, couldn't move anything if you try!

Even the EXT cannot reach the two furthest points, so rear and just under the door, works fine. Car can go on in either direction.

As crazy as it sounds, I can also use it to lift the 1991 Miata by going across the car side to side rather than under the rails. It is safe to do so, Quickjack even has a video to use it that way! Very versatile, should have bought these years ago!