FS: ZPE Griptec 2.60" 10 rib Whipple Pulley - Level 3 grip finishing - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DSMer1 · 11-27-2020, 09:28 PM

I am selling a ZPE Griptec 2.60" 10 rib pulley for a Whipple 2.9 supercharger. This has the level 3 grip finishing on it.
It is brand new still in the packaging. I bought this as a spare. I made a considerable amount of power on this size pulley with the Whipple 2.9. Going off Memory it was well into the 900's HP and mid 8's Tq to the wheel through a 4L80, looser converter and a 9" rear end. IIRC I was at over 800ft lbs tq at the wheels on the initial hit on the dyno (stating the run at 3k rpms)

Condition: Brand New Perfect
Location: Minneapolis, MN
Price: $100

11-27-2020, 09:28 PM	#1
DSMer1 Drives: 14 and 15 SS's Join Date: Feb 2018 Location: Minneapolis, Minnesota Posts: 387	FS: ZPE Griptec 2.60" 10 rib Whipple Pulley - Level 3 grip finishing I am selling a ZPE Griptec 2.60" 10 rib pulley for a Whipple 2.9 supercharger. This has the level 3 grip finishing on it. It is brand new still in the packaging. I bought this as a spare. I made a considerable amount of power on this size pulley with the Whipple 2.9. Going off Memory it was well into the 900's HP and mid 8's Tq to the wheel through a 4L80, looser converter and a 9" rear end. IIRC I was at over 800ft lbs tq at the wheels on the initial hit on the dyno (stating the run at 3k rpms) Condition: Brand New Perfect Location: Minneapolis, MN Price: $100 Attached Images __________________ Bolt-ons!