[Z OH 6]

Originally Posted by FoundNemo

Buddy's set wasnt warped but the passenger side collector area barely rubs the aluminum crossbrace under throttle. Will take a picture next time we have it on a lift. Also melted the plastic on his steering shaft cover despite the Jet Hot coating. Wrapped it in DEI cool tape and wrapped the passenger side lower harness too to prevent issues.

Interesting, which Jet Hot coating? My Kooks 2" with 2400F Jet Hot coating hasn't melted my steering shaft cover.

[Joshinator99]

Originally Posted by alssiri

I have LG headers & they are leaking & touching the brace like crazy 🤪
I ordered a set of Dynatech 2" hoping they will fit great.

Ahmad

I have the 2" stainless Dynatech headers and the fit is great. I'd still recommend ceramic coating. Definitely heat wrap the passenger side wiring harness as you should with any header IMO.

[jvandy50]

Originally Posted by FoundNemo

Buddy's set wasnt warped but the passenger side collector area barely rubs the aluminum crossbrace under throttle. Will take a picture next time we have it on a lift. Also melted the plastic on his steering shaft cover despite the Jet Hot coating. Wrapped it in DEI cool tape and wrapped the passenger side lower harness too to prevent issues.

mine also barely hit the crossbrace, but they were so easy to install we just dinged em a tad and carried on lol.

i ain't mad

[Camaro1973]

Originally Posted by jvandy50

mine also barely hit the crossbrace, but they were so easy to install we just dinged em a tad and carried on lol.

i ain't mad

Better to be closer here then on the motor mounts

[jvandy50]

Originally Posted by Camaro1973

Better to be closer here then on the motor mounts

exactly, and so much room everywhere else, we were pretty pumped.

[alssiri]

Originally Posted by Joshinator99

I have the 2" stainless Dynatech headers and the fit is great. I'd still recommend ceramic coating. Definitely heat wrap the passenger side wiring harness as you should with any header IMO.

Unfortunately I just got an email from Summit Racing saying that they are no longer available from the manufacturer

Ahmad

[Joshinator99]

Originally Posted by alssiri

Unfortunately I just got an email from Summit Racing saying that they are no longer available from the manufacturer

Ahmad

I believe Jannetty Racing was a fan of their headers too, he might have them in stock.

[FoundNemo]

Originally Posted by Z OH 6

Interesting, which Jet Hot coating? My Kooks 2" with 2400F Jet Hot coating hasn't melted my steering shaft cover.

Standard 1300 or whatever silver ceramic. CSP said the extreme jet hot coating is more durable but insulates heat less than the lower end standard coating. My buddy asked when he bought the headers about upgrading and that was the reply from their sales folks (not Andrew). Seemed.. odd, but he went with the regular coating because of that feedback.

Frankly I dont know how a thicker coating would insulate less for heat.

[FoundNemo]

Originally Posted by jvandy50

mine also barely hit the crossbrace, but they were so easy to install we just dinged em a tad and carried on lol.

i ain't mad

It resolved itself with a little bump from the headers. No more issue.