09-08-2018, 08:23 AM | #1 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
PARTING OUT - 2013 CAMARO ZL1 - LSA /AUTO - 33K Miles - North Alabama
2013 CAMARO ZL1 PART OUT
***THE WHOLE CAR IS NOT FOR SALE...I AM SELLING PARTS!!!!*** I am PARTING OUT a 2013 Chevrolet Camaro ZL1. Its a black car with 33K miles. It has a factory supercharged 6.2L LSAwith a 6L90E automatic transmission. It has black leather with suede inserts. The HOOD is in great shape. Wheels are good but one front tire will need to be replaced. The running gear is a LSA (6.2L) with a 6spd automatic manual (6L90E) trans. I will only sell the dropout as a whole...I will not sell engine parts (supercharger, accessories, harness , computer, ect) or separate the motor and transmission. The engine is super clean and will be professionally removed with no cut wires or fluids lost. Video of it Running: https://youtu.be/QbzDo9nBrKE The drop out (complete motor, trans, harness, computer, gas pedal) is $13,900 (WILL NOT SHIP) Seats are $850 (WILL NOT SHIP) Complete rear cradle / diff $2500 (WILL NOT SHIP) Tires and Wheels $850 (WILL NOT SHIP) Front and rear Calipers are $1200 Spoiler is SOLD! Please let me know what parts your looking for. I have lots of other Camaro parts as well if you don't see what you need. Call or Text is the best way to contact: 229-894-0165 I WILL NOT SHIP LARGE PARTS LIKE BUMPERS, DOORS, OR SEATS...THOSE MUST BE PICKED UP IN ATHENS AL 35613. |
09-08-2018, 08:47 AM | #2 |
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
How much for the leather dash insert? Shipped to ny.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
09-08-2018, 09:12 AM | #3 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
The dash insert on this car is suede and matches the seats. Is that what your asking about or would you like a black leather one? I have those too.
Text me at 229-894-0165 it’s much easier to communicate at the shop that way than posting on the board. |
09-08-2018, 08:40 PM | #4 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
How much for the hood?
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
09-08-2018, 08:47 PM | #5 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
|
09-08-2018, 08:53 PM | #6 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
What exhaust is on there?
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
09-08-2018, 09:41 PM | #7 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
|
09-09-2018, 08:55 AM | #8 |
Drives: 2011 1ss Join Date: Jun 2017
Location: Baton Rouge
Posts: 181
|
How much for the MyLink?
|
09-09-2018, 08:57 AM | #9 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
|
09-09-2018, 09:16 AM | #10 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Did the rear fascia survive and how much for it with diffuser an what not?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-09-2018, 02:34 PM | #11 |
Drives: 2012 Chevy Camaro 2SS Join Date: May 2016
Location: Las Vegas
Posts: 416
|
How much for pedals and sterling well
Sent from my iPhone using Tapatalk |
09-09-2018, 02:41 PM | #12 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
People if you are serious about buying something you will take the time to text me...especially if your posting with your iPhone.
229-894-0165 |
09-11-2018, 02:19 PM | #13 |
Drives: 2010 IO RS/SS A6 Join Date: Aug 2018
Location: Minnesota
Posts: 15
|
newb question... would the mylink plug and play in a 2010ss?
|
09-11-2018, 02:21 PM | #14 |
Drives: POS Join Date: Feb 2016
Location: Athens AL
Posts: 173
|
|
|
|
|
|