Anyone used this splitter?? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Fier23 · 11-14-2016, 10:24 PM

http://www.ebay.com/itm/Fit-For-2014...VXAqIa&vxp=mtr

I was looking into this one and was wondering if anyone has installed one? Any problems?

shibbs · 11-14-2016, 11:52 PM

Looks just like the 2014+ version of the kit that I purchased for my car. Fit is great. Finish on the parts that matter is also great. The underside of mine was.... meh at best. That's fine. I'm lowered a bit, and I knew it would scrape. That being said, 2+ years later and it still looks as good as the day I threw it on.

FYI - I just scuffed it with some Scotchbrite red pads and sprayed it with some flexible Semi-gloss bumper paint.

Fier23 · 11-14-2016, 11:59 PM

Quote:

Originally Posted by shibbs

Looks just like the 2014+ version of the kit that I purchased for my car. Fit is great. Finish on the parts that matter is also great. The underside of mine was.... meh at best. That's fine. I'm lowered a bit, and I knew it would scrape. That being said, 2+ years later and it still looks as good as the day I threw it on.

FYI - I just scuffed it with some Scotchbrite red pads and sprayed it with some flexible Semi-gloss bumper paint.

You have a picture by chance?

shibbs · 11-14-2016, 11:59 PM

Quote:

Originally Posted by Fier23

You have a picture by chance?

Yeah, in my profile.

http://www.camaro5.com/forums/album.php?albumid=15760

SSEssence · 11-15-2016, 09:32 AM

Did it come with the hardware or did you have to source it yourself?

Jokersmoker7 · 11-17-2016, 02:12 PM

I would like to know as well what type of hardware is needed to install this? i asked the seller he said it does not include anything but the splitter itself.

SSEssence · 11-17-2016, 02:51 PM

I'm guessing underneath you need to drill holes in your stock bumper and use nuts and bolts.

BlackMamba14 · 11-17-2016, 03:37 PM

I bought that exact one from ikon motorsports off ebay in august. took like 3 days to get it. it fits and looks great. it comes with like 4 sets of nuts and bolts. the holes line up and use the two existing bolts in the center underneath, but you have to drill out the others. I just got 4 more nuts and bolts I had layin around and they worked great. no problems installing, it took like a half hour. theres even little holes to put that rubber air damper strip back on the bottom if you want. im happy with it. the only thing I don't like is that it seems like an oily plastic, tape doesn't stick, so im not sure how to get it painted. im not a body guy. but its not cheaply made at all, its sturdy material.

this is the only picture I got right now, if ya want some more, ill take some

Fier23 · 11-18-2016, 07:42 PM

I'm going to try and either paint it myself or get it painted professionally.

11-14-2016, 10:24 PM	#1
Fier23 Drives: 2015 Camaro 2/SS M6 Join Date: May 2016 Location: Kansas City Posts: 69	Anyone used this splitter?? http://www.ebay.com/itm/Fit-For-2014...VXAqIa&vxp=mtr I was looking into this one and was wondering if anyone has installed one? Any problems? __________________ 2015 Camaro 2/SS 820hp supplied by ADM Performance

11-15-2016, 09:32 AM	#5
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,803 View My Garage	Did it come with the hardware or did you have to source it yourself? __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

11-17-2016, 02:51 PM	#7
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,803 View My Garage	I'm guessing underneath you need to drill holes in your stock bumper and use nuts and bolts. __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

11-17-2016, 03:37 PM	#8
BlackMamba14 Drives: 2014 2SS Blue on Black Join Date: Apr 2016 Location: Cortland, Ohio Posts: 33	I bought that exact one from ikon motorsports off ebay in august. took like 3 days to get it. it fits and looks great. it comes with like 4 sets of nuts and bolts. the holes line up and use the two existing bolts in the center underneath, but you have to drill out the others. I just got 4 more nuts and bolts I had layin around and they worked great. no problems installing, it took like a half hour. theres even little holes to put that rubber air damper strip back on the bottom if you want. im happy with it. the only thing I don't like is that it seems like an oily plastic, tape doesn't stick, so im not sure how to get it painted. im not a body guy. but its not cheaply made at all, its sturdy material. this is the only picture I got right now, if ya want some more, ill take some Attached Images

11-18-2016, 07:42 PM	#9
Fier23 Drives: 2015 Camaro 2/SS M6 Join Date: May 2016 Location: Kansas City Posts: 69	I'm going to try and either paint it myself or get it painted professionally. __________________ 2015 Camaro 2/SS 820hp supplied by ADM Performance

11-17-2016, 02:12 PM	#6
Jokersmoker7 Drives: 2014 camaro 2ls Join Date: Jan 2014 Location: North sac Posts: 18	I would like to know as well what type of hardware is needed to install this? i asked the seller he said it does not include anything but the splitter itself.