10-25-2012, 03:52 PM | #183 |
It was ninety nine cents!
|
Looks way better dude!!
__________________
|
10-25-2012, 04:06 PM | #184 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Thanks! I much more impressed with it haha, still not perfect but way way way better haha. I just am pretty scared of doing the front bumper black out haha. It's a much bigger piece which leaves a lot of room for error haha.
|
10-25-2012, 05:21 PM | #185 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Definatly looks better! I think maybe over time the smaller ones may go away! let's hope!
|
10-26-2012, 04:43 PM | #186 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Thanks it looks so much better haha. After a day some of the smaller bubbles seem to be going away so all is good . One day I'll have to do the front bumper one haha, one day....
|
10-27-2012, 04:52 AM | #187 |
It was ninety nine cents!
|
Depending on the weather and my schedule next week I can help ya with that blackout
__________________
|
10-27-2012, 09:51 PM | #188 |
having FUN now 13.66@101
|
GREAT looking build. Love the wheels, tires, and color combo. Then again, I might be a little partial to those items. We have very similiar builds going for us.
__________________
|
10-27-2012, 10:15 PM | #189 | |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Quote:
Thanks! Well what can I say we have excellent taste haha. |
|
10-27-2012, 10:19 PM | #190 |
OFF THE CHAIN
|
No luck with the idea i gave you KJ?
|
10-27-2012, 10:38 PM | #191 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
No I haven't gotten a chance to do it yet. Just used a very small needle and poked a couple holes and the big bubbles went away. Some of the small ones are going away now too. If the rest of them don't go away I'll have to give your idea a try.
|
10-28-2012, 12:51 PM | #192 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
O yea almost forgot to mention....I went to the track today to do some 1/4 mile runs. Lets just say it wasn't the best of days lol. Lets just say:
I am terrible at drag racing haha. I am so inconsistent. My best run today was my first run which was 14.0829@98.28 with a 2.1108 60ft. From there my ET got worse and so did my 60ft haha. The ET ranged from 14.0829-14.4939 and my 60ft from 2.1108-2.2.2718. Before today my best was 14.0009@99.61 with a 2.16? 60ft. It seems that when I try to improve my 60ft I end up making it worse lol. I tried launching at diff RPMs, that didn't do much. I tried just flooring it and that didn't help, tried easing into it that didn't help haha. I haven't been messing with the TC or anything and haven't been doing burnouts before (have General G-max tires not stock Pirellis). To be honest don't really know how to do a burnout other than when I spin a little off the line. I also haven't been able to mess with tire pressures yet. I wish I remember what I did for my 2.1108 60ft run cause I would do that all the time lol |
10-30-2012, 03:53 PM | #193 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Installed my Rx breather and it was pretty straight forward. Luckily it came with caps so I did not have to go out and buy any, and thats always good haha. I am glad to get that big honking hose off my driver side valve cover. I know everyone likes pics so here they are The second and third pic are where I had to cap off in case anyone needed to know what to do or if anyone cares lol. Last two pics are my engine bay before I started doing mods and now (still got a lot of work to do)
|
10-30-2012, 11:03 PM | #194 |
Boosted
Drives: 2012 1LT RS... with snails Join Date: May 2012
Location: New Hampshire
Posts: 1,455
|
I didn't realize the breather purchase comes with the hose caps. sweet deal!
__________________
IPS Twin Turbos, Corsa Exhaust, Ported Throttle Body. 461 rwhp 443 rwtq!! *Cameron Hass.ani* |
10-31-2012, 12:28 AM | #195 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Yea I didn't know for sure either. I had a feeling they did but never knew. I think I may end up going to Lowe's and getting different ones. Not sure if I like the ones that came with it took much, not gonna lie they look like nipples haha. May try to find some that are flat at the end and go in instead of covering the hole.
|
11-10-2012, 04:05 PM | #196 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Not much going on as far as new mods really. She is gonna be going into storage in a couple weeks and I'm just trying to save up for the holidays, great deals for black friday and the mass amount of mods I have planned this winter. Unfortunately the other day one of my LED DRLs stopped working. I'm hoping it is actually the LED and not the connector, haven't gotten a chance to switch in the stock bulb to see what is going on. I hope it is just the LED. The original ones I got of off amazon but I think I am gonna go with these from AAC. A little bummed they are twice as much as the ones on amazon but maybe they will be worth it, plus it comes with a 'free" DRL harness that I could always sell since I already have one lol. Gotta think positive!
|
|
|
Tags |
12secbuild |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[COTW 3/21/11]: "MAC" | GB EB | Member Car Journals | 172 | 03-27-2014 06:50 PM |
SlowSS's Build Thread | SlowSS | Member Car Journals | 47 | 03-01-2014 11:20 AM |
HOW MUCH $$$ HAS CAMARO5 COST YOU? | GB EB | 5th Gen Camaro SS LS LT General Discussions | 117 | 02-18-2013 11:10 AM |
[COTW 11/29/10]: My 2011 IOM 2SS/RS's journey | lock | Member Car Journals | 66 | 06-08-2012 09:34 PM |
Blake's unique IOM | LED Crazy | Member Car Journals | 9 | 06-02-2011 12:49 AM |