Virginia Camaro Club - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

edog · 10-10-2013, 08:36 AM

The VCC has created a group on Facebook. if you have time, go and check it out.

If you are a membercofcthe VCC, you will most likely get an invite.

bhillakaiceberg · 10-11-2013, 12:38 PM

Quote:

Originally Posted by edog

The VCC has created a group on Facebook. if you have time, go and check it out.

If you are a membercofcthe VCC, you will most likely get an invite.

Thanks EDOG. Got it and posted the flyer in there!

edog · 10-12-2013, 05:34 AM

I saw it. Hopefully we can get a good turnout. Let's see how it goes.

edog · 11-28-2013, 10:03 PM

Each year the VCC tries to give back to the community. As members of the VCC we will be ringing the bell for the Salvation Army on December 14th. We will be doing shifts which start at 10am and stop at 9pm in one hour shifts. If anyone would like to volunteer your time to this worthy cause, let us know.

Hopefully we can get good paticipation from VCC members which keep the shifts short. Have a great holiday.

scubadoo7 · 11-30-2013, 05:54 PM

We'd like to see some Virginia Camaro club members tomorrow morning at Kohls Fair lakes cars and coffee. 830 till 11am. A Starbucks is in the parking lot area.

edog · 12-01-2013, 11:01 PM

Gotcha.

I am working this weekend so I can head to Daytona on Thursday. HPDE events, so I couldnt make it. We can get some people together for future events.

1fast · 12-02-2013, 11:28 AM

Yes wanted to post up here also ive gotten alot of people not aware of our location and what we do so figure post up here also about our location. We are Broadview Auto Service located in Warrenton, Va. and we do everything from Inspections to full blown engine builds to Dyno tuning.

We are the only Gm LSX tuning shop that does Gm only in the area. If their is anything we can help you guys and Gals out with let us know.

https://www.facebook.com/BroadviewAutoService
540-439-3737

lmm2438 · 12-13-2013, 07:50 AM

Wanted to say thanks to the gentleman who told me about the club at the Sheetz on Lafayette Blvd!

~Lisa

scubadoo7 · 12-13-2013, 11:08 AM

Quote:

Originally Posted by lmm2438

Wanted to say thanks to the gentleman who told me about the club at the Sheetz on Lafayette Blvd!

~Lisa

Welcome to Camaro5, and hope to see you Sunday in Aquia for the Camaro and Coffee meet.

Z/28Dan · 12-14-2013, 09:40 PM

Camaros & Coffee is ON for tomorrow morning, the 15th. Bring your dd if you have to!

edog · 12-15-2013, 07:51 PM

For those attending the GM Nationals in June, here is info if you want to hang with the VCC.

Hotel info for GM Nationals at Carlisle on June 21, 2014.

Several members of the VCC will be traveling to Carlisle early on the 21st for the show and staying in Gettysburg at the Hampton Inn, 1280 York Road, Gettysburg, Pennsylvania, 17325, 717-338-9121 that night.

Book now if interested in joining the VCC road trip!

http://hamptoninn3.hilton.com/en/hot...AHX/index.html

Also, receive 20% off show field registration if you register for the show before 3 January: http://store.carlisleevents.com/

lmm2438 · 12-25-2013, 09:46 PM

Hope Every one had a Merry Christmas!

edog · 12-29-2013, 11:16 PM

I did...

Hope you did as well.

FIREICE11 · 01-05-2014, 09:28 PM

I hope you guys had a great Christmas. I am planning a trip to see you guys on Sunday. I think I have about 7 so far and the number is climbing. I see that most have already checked going on Facebook event post. Can't wait to meet up.

10-10-2013, 08:36 AM	#85
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	The VCC has created a group on Facebook. if you have time, go and check it out. If you are a membercofcthe VCC, you will most likely get an invite. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

10-12-2013, 05:34 AM	#87
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	I saw it. Hopefully we can get a good turnout. Let's see how it goes. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

11-28-2013, 10:03 PM	#88
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	Each year the VCC tries to give back to the community. As members of the VCC we will be ringing the bell for the Salvation Army on December 14th. We will be doing shifts which start at 10am and stop at 9pm in one hour shifts. If anyone would like to volunteer your time to this worthy cause, let us know. Hopefully we can get good paticipation from VCC members which keep the shifts short. Have a great holiday. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

12-01-2013, 11:01 PM	#90
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	Gotcha. I am working this weekend so I can head to Daytona on Thursday. HPDE events, so I couldnt make it. We can get some people together for future events. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

12-02-2013, 11:28 AM	#91
1fast 8.60 @ 157 @ 4200lbs Drives: 2010 Gen 5 Join Date: Nov 2013 Location: Warrenton, va Posts: 299 View My Garage	Site Sponsor Yes wanted to post up here also ive gotten alot of people not aware of our location and what we do so figure post up here also about our location. We are Broadview Auto Service located in Warrenton, Va. and we do everything from Inspections to full blown engine builds to Dyno tuning. We are the only Gm LSX tuning shop that does Gm only in the area. If their is anything we can help you guys and Gals out with let us know. https://www.facebook.com/BroadviewAutoService 540-439-3737

11-30-2013, 05:54 PM	#89
scubadoo7 Airborne Recondo Drives: Crystal Red 2SS 1LE Join Date: Apr 2012 Location: Fairfax Station Va. Posts: 864	We'd like to see some Virginia Camaro club members tomorrow morning at Kohls Fair lakes cars and coffee. 830 till 11am. A Starbucks is in the parking lot area.

12-13-2013, 07:50 AM	#92
lmm2438 Drives: 2011 RS Join Date: Dec 2013 Location: Fredericksburg VA Area Posts: 2	Invite on Lafayette Blvd Wanted to say thanks to the gentleman who told me about the club at the Sheetz on Lafayette Blvd! ~Lisa

12-14-2013, 09:40 PM	#94
Z/28Dan Drives: 2013 HWSE Indy Festial #26 Join Date: Mar 2011 Location: Fredericksburg, VA Posts: 2,670 View My Garage	Camaros & Coffee is ON for tomorrow morning, the 15th. Bring your dd if you have to! __________________ There are only so many days in your lifetime. So get out and drive your Camaro... Dan

12-15-2013, 07:51 PM	#95
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	GM Nationals at Carlisle on June 21, 2014, Hotel info For those attending the GM Nationals in June, here is info if you want to hang with the VCC. Hotel info for GM Nationals at Carlisle on June 21, 2014. Several members of the VCC will be traveling to Carlisle early on the 21st for the show and staying in Gettysburg at the Hampton Inn, 1280 York Road, Gettysburg, Pennsylvania, 17325, 717-338-9121 that night. Book now if interested in joining the VCC road trip! http://hamptoninn3.hilton.com/en/hot...AHX/index.html Also, receive 20% off show field registration if you register for the show before 3 January: http://store.carlisleevents.com/ __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

12-25-2013, 09:46 PM	#96
lmm2438 Drives: 2011 RS Join Date: Dec 2013 Location: Fredericksburg VA Area Posts: 2	Hope Every one had a Merry Christmas!

12-29-2013, 11:16 PM	#97
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	I did... Hope you did as well. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

01-05-2014, 09:28 PM	#98
FIREICE11 FireStorm11 Drives: White with Orange Stripe Join Date: Dec 2011 Location: United States Posts: 190 View My Garage	I hope you guys had a great Christmas. I am planning a trip to see you guys on Sunday. I think I have about 7 so far and the number is climbing. I see that most have already checked going on Facebook event post. Can't wait to meet up. __________________ http://www.facebook.com/somdcamaroclub