ZL1 Arrived at ECS For Testing - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

closs2sx · 07-31-2012, 06:17 AM

What intake and headers were used?

grocerygetter · 07-31-2012, 06:29 AM

I want to know more about step 2 to 3. How much boost...same 2-3? Diameter of headers?

East Coast Supercharging · 07-31-2012, 08:05 AM

Quote:

Originally Posted by closs2sx

What intake and headers were used?

Quote:

Originally Posted by grocerygetter

I want to know more about step 2 to 3. How much boost...same 2-3? Diameter of headers?

We used ARH 1 7/8 headers with cats. We used an LPE airbox kit too. Upper pulley was a 2.55. We gained about 4 pounds of boost from stock to stage one. When we added the headers we only lost about 1/2 pound of boost after adding the headers.. We were very please that the headers added a solid 40rwhp and 25 ft lbs of torque.

East Coast Supercharging · 07-31-2012, 08:06 AM

Last pic before it gets loaded up for the fest

Supercharged SS · 07-31-2012, 08:15 AM

Quote:

Originally Posted by East Coast Supercharging

The car will be out at the fest if anyone wants to check it out

Matt said I could take it down the track!!!

I'll bring my own 17's!

East Coast Supercharging · 07-31-2012, 08:24 AM

Quote:

Originally Posted by Supercharged SS

Matt said I could take it down the track!!!

I'll bring my own 17's!

Well as long as the boss said it ok

grocerygetter · 07-31-2012, 11:42 AM

impressive.

DanSS24 · 07-31-2012, 12:23 PM

Quote:

Originally Posted by East Coast Supercharging

This is the spring coupler shaft along with the factory coupler. Notice the marks that the springs are making on the shaft. This car only has 600 miles on it too. This wear issue is taken care of by the solid coupler that we install shown below.

Quote:

Originally Posted by East Coast Supercharging

The next few pics show the removal of the factory pulley. It takes a lot of force and the correct tool to get it. We then use a press to install the new pulley. We then pin the new pulley or the pulley shaft as shown in the pics.

Not to sound like an idiot, but did you replace the shaft also when replacing the coupler? Could not tell by the pics and it would make sense to do it, correct?

POWERFREAK · 07-31-2012, 02:21 PM

I'm friends with the owner of that car...can't wait to see (or feel) the results.

East Coast Supercharging · 07-31-2012, 02:45 PM

Quote:

Originally Posted by POWERFREAK

I'm friends with the owner of that car...can't wait to see (or feel) the results.

he is gonna love it

POWERFREAK · 07-31-2012, 02:46 PM

Quote:

Originally Posted by East Coast Supercharging

he is gonna love it

oh, I'm sure he will.

Sales @ ECS · 07-31-2012, 05:23 PM

It is definitely a beast to say the least!! Over 600 to the tire with basic mods, got to love it.

VanquisherSS · 07-31-2012, 05:30 PM

Damn too bad I couldn't make it down this week would have loved to see this beast.

07-31-2012, 06:17 AM	#29
closs2sx Drives: 1970 chevelle Join Date: Aug 2011 Location: Central NH Posts: 1,427	What intake and headers were used? __________________ On Order 2018 ZL1 1LE Garnet Red Tint Coat Metallic MY Car 2015 Z06 Z07 Daytona Sunrise Orange Metallic Dads Car 2013 ZL1 vin 963 Crystal Red Tint Coat/Black Wheels Exposed Carbon Fiber Insert 6 Spd Manual

07-31-2012, 06:29 AM	#30
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	I want to know more about step 2 to 3. How much boost...same 2-3? Diameter of headers? __________________ -John S.

07-31-2012, 08:06 AM	#32
East Coast Supercharging Drives: 8 second C5 Drag Car, C6 Road racer Join Date: Sep 2009 Location: Cream Ridge, NJ 609-752-0321 Posts: 778	Last pic before it gets loaded up for the fest Attached Images

07-31-2012, 11:42 AM	#35
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	impressive. __________________ -John S.

07-31-2012, 02:21 PM	#37
POWERFREAK I.AM. Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008 Location: NY Posts: 2,638	I'm friends with the owner of that car...can't wait to see (or feel) the results. __________________ NY5thgen.com

07-31-2012, 05:23 PM	#40
Sales @ ECS Drives: 2011 CG 2SS Join Date: Oct 2009 Location: East Coast Supercharging 609 752 0321 Posts: 708	It is definitely a beast to say the least!! Over 600 to the tire with basic mods, got to love it. Attached Images

07-31-2012, 05:30 PM	#41
VanquisherSS Hasbin of Stock Bottom HP Drives: CTS-V Coupe, 04 TT Viper Join Date: May 2011 Location: NJ Posts: 2,561 View My Garage	Damn too bad I couldn't make it down this week would have loved to see this beast.