2012 blower motor removal and reinsertion - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mwhitnee · 07-11-2022, 04:45 PM

I have a 2012 Camaro SS and I want to take out the blower motor as a mouse has gotten into the duct system.

I have the glove boxed removed and it seems like the blower motor is attached with 2 rivets. There are other tabs on the blower motor housing which line up with some holes so it looks like I could just use screws to reinsert the motor.

My blower motor is fine and I want to put it back when I'm done looking in there. If anyone has any advice on how to do this it would be appreciated. Thanks!

Mr_Draco · 07-11-2022, 06:17 PM

There is a diy on how to take it out somewhere here on the forums and if I remember correctly, it has to be cut out with a knife. And yes you are correct on those holes, those are meant to be used to screw the motor back in.

07-11-2022, 04:45 PM	#1
mwhitnee Drives: 2012 Camaro SS/RS convertible Join Date: Apr 2013 Location: Massachusetts Posts: 133	2012 blower motor removal and reinsertion I have a 2012 Camaro SS and I want to take out the blower motor as a mouse has gotten into the duct system. I have the glove boxed removed and it seems like the blower motor is attached with 2 rivets. There are other tabs on the blower motor housing which line up with some holes so it looks like I could just use screws to reinsert the motor. My blower motor is fine and I want to put it back when I'm done looking in there. If anyone has any advice on how to do this it would be appreciated. Thanks!

07-11-2022, 06:17 PM	#2
Mr_Draco Drives: 2SS/RS Join Date: Sep 2008 Location: Western North Carolina Posts: 7,182	There is a diy on how to take it out somewhere here on the forums and if I remember correctly, it has to be cut out with a knife. And yes you are correct on those holes, those are meant to be used to screw the motor back in.