ITGuy11's Build thread: From OEM to BADASS [COTW 11/19/12] - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ITGuy11 · 11-19-2012, 08:16 PM

Quote:

Originally Posted by Nitroman28

So is the ZL1 Pump and ADM controller keeping up? And what pulley are you using with the OD Cog to get 9.5?

The ZL1 pump and ADM controller are providing plenty of fuel. Under high flow conditions the fuel pressure is increased to 67psi above 4000rpm. We just logged fuel pressure on the dyno today and it holds strong. Also verified pressure with a mechanical fuel pressure gauge at the fuel rail.

I am running the 3.8" pulley up front with the OD rear cog drive on the rear. This is making the 9.5 pounds of boost.

Nitroman28 · 11-19-2012, 08:32 PM

Quote:

Originally Posted by ITGuy11

The ZL1 pump and ADM controller are providing plenty of fuel. Under high flow conditions the fuel pressure is increased to 67psi above 4000rpm. We just logged fuel pressure on the dyno today and it holds strong. Also verified pressure with a mechanical fuel pressure gauge at the fuel rail.

I am running the 3.8" pulley up front with the OD rear cog drive on the rear. This is making the 9.5 pounds of boost.

Thanks for the reply, I'm going to be running the same setup, Just different cam and ported heads. Just don't want to go over 10lb.

ITGuy11 · 11-19-2012, 08:49 PM

Quote:

Originally Posted by Nitroman28

Thanks for the reply, I'm going to be running the same setup, Just different cam and ported heads. Just don't want to go over 10lb.

You should be under 10psi for sure with this setup. If you do use the ADM fuel controller make sure your tuner talks to Andy at ADM on what to change in your tune for the controller to work properly.

newagemuscle · 11-20-2012, 06:55 AM

Very nice write up.

ken53007 · 11-20-2012, 08:07 AM

very nice setup keep up the good work

Ivan @ Southwest Speed · 11-20-2012, 11:18 AM

Love everything about it so far....awesome to see the DIYers handling up!!

Great build man. Really nice.
Ivan

camaro_RS · 11-20-2012, 11:37 AM

Dayummm!! Awesome car and great build!! Congrats on COTW.

LAWMAN · 11-20-2012, 02:50 PM

Very nice,looks great,i took delivery of my 2010 on 7/2/09

Vengeance Graphix · 11-20-2012, 08:11 PM

Looks great! Congrats on COTW!

pierre777 · 11-21-2012, 12:36 AM

congrats for COTW , awesome build, subscribed.

monSSter · 11-21-2012, 07:43 AM

Awesome build

stand-al0ne · 11-21-2012, 11:07 AM

good job on the build! Congrats on COTW

JWoj3540 · 11-21-2012, 11:48 AM

Awesome car man

rtcat600man · 11-21-2012, 01:27 PM

CONGRATS and AWESOME job, you might be the first Detroit 5th Gen Camaro Club member to be featured as the COTW for this site.

I knew I reconized that Camaro as I started to roll thru the photos.

Next spring we need to do that photo shoot with the other TSW wheels owners.

See you in a couple weeks.

11-20-2012, 06:55 AM	#18
newagemuscle Philippians 4:13 Drives: SLP Supercharged LS3 Join Date: Aug 2009 Location: The Motor City - Michigan Posts: 2,902 View My Garage	Very nice write up. __________________

11-20-2012, 11:37 AM	#21
camaro_RS Emerald Coast Camaros Drives: A lot of show, not much go. Join Date: Mar 2011 Location: Emerald Coast Posts: 3,388	Dayummm!! Awesome car and great build!! Congrats on COTW. __________________ -White Mary Jane....build thread [COTW 6/11/12] :

11-20-2012, 02:50 PM	#22
LAWMAN Drives: 2010 cam.2ss/rs.iom,07'escalade esv Join Date: May 2009 Location: Pasc.Ms. Posts: 841	Very nice,looks great,i took delivery of my 2010 on 7/2/09 __________________ A9120159 1100:12/19/08 3800:06/19/09 6000:07/02/09

11-20-2012, 08:11 PM	#23
Vengeance Graphix Drives: 2017 Corvette Grand Sport Join Date: May 2010 Location: Central NJ Posts: 10,870	Looks great! Congrats on COTW! __________________ Vengeance Graphix

11-21-2012, 12:36 AM	#24
pierre777 HT5 COTW 9/3/2012 Drives: Cyber Bullet Join Date: Jun 2011 Location: lebanon Posts: 4,555 View My Garage	congrats for COTW , awesome build, subscribed. __________________

11-20-2012, 08:07 AM	#19
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	very nice setup keep up the good work

11-20-2012, 11:18 AM	#20
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Love everything about it so far....awesome to see the DIYers handling up!! Great build man. Really nice. Ivan

11-21-2012, 07:43 AM	#25
monSSter Drives: 2017 SS Join Date: Dec 2010 Location: BOYNTON BEACH,FL Posts: 330 View My Garage	Awesome build __________________

11-21-2012, 11:07 AM	#26
stand-al0ne Rev Couture Drives: 2010 LS Camaro & 2013 Rav4 Ltd Join Date: Jan 2010 Location: Jamlando, FL Posts: 1,129 View My Garage	good job on the build! Congrats on COTW __________________ EBC Brakes\| DOT 4\|Bigworm\| SickSpeed\| BMR \| IPF \| Vararam\| MRT \|MGW \| Nitto \| Rx \| Iggee \|ZL-1 Sways\| Hurst \| Apex Racing\|Past: Srt-4\| 6.0L GTO- RIP \| '98 Integra

11-21-2012, 11:48 AM	#27
JWoj3540 Drives: 2012 2SS/RS M6 Join Date: Jul 2011 Location: Metro Detroit Posts: 696	Awesome car man

11-21-2012, 01:27 PM	#28
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	CONGRATS and AWESOME job, you might be the first Detroit 5th Gen Camaro Club member to be featured as the COTW for this site. I knew I reconized that Camaro as I started to roll thru the photos. Next spring we need to do that photo shoot with the other TSW wheels owners. See you in a couple weeks. __________________ MY BUILD