Drastically lowering IAT.... - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

blufin · 08-24-2010, 07:15 PM

Little higher than i anticipated, but i don't doubt its effectiveness. Gotta pay to play.

SC2150 · 09-03-2010, 09:13 AM

WE NEED A DONER CAR to finish this!!!!

vertc6 · 09-03-2010, 10:44 AM

Can some explain to me how they are offering to do this for free and no one wants it????

600hp-lpe · 09-03-2010, 10:50 AM

Quote:

Originally Posted by vertc6

Can some explain to me how they are offering to do this for free and no one wants it????

Some of us are a little far away...

SC2150 · 09-05-2010, 04:44 PM

Quote:

Originally Posted by 600hp-lpe

Some of us are a little far away...

I here you there. C'mon FL area members.....this is an unreal opportunity!!

advfire · 09-06-2010, 07:57 AM

Would love it and i live in Florida but too far to travel. other side of the state. Very interested...

realsquash · 09-06-2010, 12:37 PM

Have you done any testing on the efficiency of this kit? What kind of temp drop are we talking about? I see 130-140F IATs on my 2300 setup (2.9" pulley, cam, headers, almost 9psi), what kind of drop can one expect from this?

Also, are you removing the air/water heat exchanger from in front of the radiator?

Andy

SC2150 · 09-06-2010, 12:44 PM

Quote:

Originally Posted by realsquash

Have you done any testing on the efficiency of this kit? What kind of temp drop are we talking about? I see 130-140F IATs on my 2300 setup (2.9" pulley, cam, headers, almost 9psi), what kind of drop can one expect from this?

Also, are you removing the air/water heat exchanger from in front of the radiator?

Andy

from 20 degrees plus in 2 minutes in FL heat.

No, the existing heat exchanger stays where it is. When the chiller is enabled the bypass valve diverts the liquid through the chiller unit instead of the heat exchanger, then back to normal when switched off.

SC2150 · 09-09-2010, 07:43 AM

STILL NEED A DONER CAR!!!!!!!

SC2150 · 09-10-2010, 08:55 PM

Bump for a doner!

*radz28* · 09-13-2010, 10:41 AM

Quote:

Originally Posted by SC2150

Bump for a doner!

BUMP!!!

WOW - if I had a car to bring you, I'd be there in a minute!!! I'm a little suprised

SC2150 · 09-13-2010, 06:14 PM

Thanks! We have set the Camaro 5 project aside to finish the GTO & 98-02 F-body as well as the Trailblazer SS. But will put it back out front when someone steps in for the deal!

blufin · 10-06-2010, 08:29 PM

I still haven't pulled the trigger on the Whipple, but when i do, i will seriously consider this as my 2nd mod. If you still need a donor at that point, we may be in business.

TPEHater · 10-07-2010, 01:06 AM

Quote:

Originally Posted by SC2150

Thanks! We have set the Camaro 5 project aside to finish the GTO & 98-02 F-body as well as the Trailblazer SS. But will put it back out front when someone steps in for the deal!

Any updates for the GTO project?

Anxiously awaiting my test unit lol.

08-24-2010, 07:15 PM	#71
blufin Drives: Fire Engine Join Date: Oct 2008 Location: WPB, Florida Posts: 1,415	Little higher than i anticipated, but i don't doubt its effectiveness. Gotta pay to play. __________________ 12.618 @ 110.75 Bone Stock 1/4 mile 8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold

09-06-2010, 07:57 AM	#76
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	Would love it and i live in Florida but too far to travel. other side of the state. Very interested... __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

10-06-2010, 08:29 PM	#83
blufin Drives: Fire Engine Join Date: Oct 2008 Location: WPB, Florida Posts: 1,415	I still haven't pulled the trigger on the Whipple, but when i do, i will seriously consider this as my 2nd mod. If you still need a donor at that point, we may be in business. __________________ 12.618 @ 110.75 Bone Stock 1/4 mile 8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY : Install Lowering Springs on 2010 Camaro	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	42	03-29-2017 01:31 PM
Pfadt Race Engineering Lowering Springs Improve Looks And Performance.	Apex Motorsports	Suspension / Chassis / Brakes	341	02-02-2014 11:52 AM
Special Pfadt lowering spring offer! Limited time SALE, Photos included!	IPS Brandon	Suspension / Chassis / Brakes	30	10-20-2010 10:24 AM
Eibach Lowering Springs & Sway Bars @ Phastek Performance	Jason@Phastek	Suspension / Chassis / Brakes	0	01-29-2010 03:56 PM

09-03-2010, 09:13 AM	#72
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	WE NEED A DONER CAR to finish this!!!!

09-03-2010, 10:44 AM	#73
vertc6 Drives: vette Join Date: Aug 2010 Location: Houston Posts: 41	Can some explain to me how they are offering to do this for free and no one wants it????

09-06-2010, 12:37 PM	#77
realsquash Drives: Four Door Camaro Join Date: Apr 2010 Location: SE WI Posts: 189	Have you done any testing on the efficiency of this kit? What kind of temp drop are we talking about? I see 130-140F IATs on my 2300 setup (2.9" pulley, cam, headers, almost 9psi), what kind of drop can one expect from this? Also, are you removing the air/water heat exchanger from in front of the radiator? Andy

09-09-2010, 07:43 AM	#79
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	STILL NEED A DONER CAR!!!!!!!

09-10-2010, 08:55 PM	#80
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Bump for a doner!

09-13-2010, 06:14 PM	#82
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Thanks! We have set the Camaro 5 project aside to finish the GTO & 98-02 F-body as well as the Trailblazer SS. But will put it back out front when someone steps in for the deal!