what is everyone doing for boost and other gages

[TRC-SS]

The Ortiz dual gauge pod for the dash bezel I just saw is now available for sale.

He's selling it for $140.

Ill wait until spring, when the car comes out of storage but I'm most likely going with that setup!

[simon.w]

Man there are some great ideas out there ... love the new pods on the side of the gauges and the two digital displays under the gauge cluster.

I went old school ... I've always loved / always had gauges on my hood ... so I made up a couple of brackets that hold on with decal tape and clamp under the lip of the hood with a couple of grub screws ... along with a cable cover (adapted from a recessed door handle from a sliding door).

[xk49]

I was sold on Dashlogic as it's the most non-intrusive setup IMO. But, now seeing the Ortiz dual gauge pod I think I might waffle.

[TRC-SS]

The old picture i posted was unfinished.

Here is the finished version. I really like it!!!

Factory color silver.

I just hope with quality and paint is good. Only one way to find out is to order it and see.

[forcefedjunkie]

Originally Posted by Unreal

Dashlogic works great, and I think they are available for all 2010+ camaros.

Blake, never blown a aeroforce fuel pressure sensor, but the instructions specifically state to always unplug it before unplugging the obd2 connector or it will blow, so I make sure to do that.

That was a possibility a few years ago but the Aeroforce fuel sensor now comes with a inline resistor for the sensor output that prevents this from happening, so it's not an issue any longer.

Todd

[FKNGRSY]

I really like those ADM digital guages. Real slick.

[Rumbumbees$ponsor]

Originally Posted by RankSS

I have the Cobalt gauges. Fuel pressure and boost on the pillar and AFR on the SLP column pod.

I like.. Cobalt is maker? and has a 2010 plus setup? Any links?

[Rumbumbees$ponsor]

Originally Posted by blake-b

From top:
Aeroforce interceptor showing RPMs, Vac/boost
Aeroforce interceptor showing oil pressure and coolant temp
Eboost2 in AC vent showing vac/boost
PLX in SLP pod on steering column showing fuel pressure. It also will show AFR and will soon show oil pressure as well once I install the sending unit and lines.

I'm not totally sure why the vac/boost are off from each other. The aeroforce is drawing from the OBDII port (ZR1 MAP and configured tune for boost installed) which is taking readings from the intake. The eboost2 takes it reading from a vacuum manifold. I'm betting the aeroforce is more correct. You'll also notice the resolution on the aeroforce is higher and it constantly fluctuates so they might be closer than the gauges appear to show.

I was using the interceptors for fuel pressure but I kept blowing the sending unit and got tired of spending $70 every time. I've had no issues with the PLX stuff.

The 2 small lights are meth or other warnings above the top pilliar?

[RankSS]

Originally Posted by Rumbumbees$ponsor

I like.. Cobalt is maker? and has a 2010 plus setup? Any links?

Autometer Cobalt. A good match I think.

[BaronConcepts]

[14ZL1M6]

Originally Posted by TRC-SS

There is a guy called Ortiz custom pods. He is in the process of making a dual pod for the dash bezel.

Im watching the updates as they are not available just yet. But Im liking what I'm seeing.

Do you have any pics with this bezel and gauges installed in the car?

Thanks

[WheelmanSS]

Originally Posted by BaronConcepts

Awesome! Finally! I have been waiting for this...

Sent you an e-mail via your website...

[RedRyder]

The best gauges aren't seen! I have a DashLogic that shows what I want on my HUD or DIC

Crappy pic -

[BaronConcepts]

Originally Posted by WheelmanSS

Awesome! Finally! I have been waiting for this...

Sent you an e-mail via your website...

Replied