SWC, REAR CAM and GPS dont work.

[jmroslin]

Hey guys,

I have the RPK5 from PAC Audion and Atoto A6. Everything is working well but the SWC, Rear Cam and GPS dont work. Any help would be very appreciated.

ATOTO A6 https://www.amazon.com/gp/aw/s/ref=is_s?k=atoto+a6



RPK5 https://www.amazon.com/gp/aw/d/B01M0...-AL&ref=plSrch





Front of Head Unit



Top of Head Unit



How I connected the wires to the Head Unit



Head Unit Without all the connected wires



How I married the RPK5 Radio Connections to the Atoto A6 Power Cord (Pin Interface). I don't know where to "marry" the other four from the Pin Interface. There are no wires left from the RPK5



Interface Module that came in with the RPK5 PAC



Dial Set to 7 (Pioneer/Other)



These were also left from the RPK5 Radio Connections. The brown wires were loop wires. It says to cut it on the instructions. Also the Nav Outputs wires left. Don't know where to marry these guys



No GPS when I tested the Head Unit. Same with any other GPS Apps




Any help would be greatly appreaciated. Thanks!

[jmroslin]

Any info?

[killercamaro23]

Originally Posted by jmroslin

Any info?

Hey dude I go the same system. Did you buy any aftermarket wiring harnesses?

[buckholt82]

I found a work around for adding swc to a camaro that different come equipped. You will save at least 250 bucks. I did it to my 2010 camaro. And didn't even have to get the bcm reprogrammed.

Sent from my SAMSUNG-SM-N920A using Tapatalk

[a.morblu]

Any updates on your GPS? I'm looking at that head unit right now for my PAC install.