Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Solo Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics


Reply
 
Thread Tools
Old 12-10-2019, 04:00 PM   #1
Ls6jay
 
Drives: Camaro
Join Date: Aug 2019
Location: Michigan
Posts: 4
btr stage 4 pds cam

anyone have any hp number or 1/4 times? btr stage 4 pds cam.

Last edited by Ls6jay; 12-10-2019 at 07:34 PM.
Ls6jay is offline   Reply With Quote
Old 12-11-2019, 03:05 PM   #2
RobZL1
fo'shizZL1
 
RobZL1's Avatar
 
Drives: 2014 ZL1
Join Date: Aug 2017
Location: ATL
Posts: 506
I don't think a whole lot of folks are running it. For a 1900 blower, the stage 3 is probably all it can handle. I've only seen a couple of dynos for the cam. One was a 6spd ZL1 with only intake and headers (stock pulleys). I think that one was around 575 or 580, but not a very worthy comparison since I think almost any cam would have made that with those mods.

The other one I saw was a 6-spd SS sedan with LSA conversion (stock LS3 bottom). I think that car was 700 or 710. It had all the other supporting mods you'd expect with that level of cam. The dyno sheet looked basically like a BTR 3 in my opinion.
__________________
2014 Red Hot #1503 | TBD SAE | RotoFab | 28% OD | GP Tuning 2.5 Cam | 1-7/8 LT's | JMS BAP | ID850 | TR7IX | MSD Wires |
APEX Catch Can | JRE Breather | Monster LT1-S Triple | C&R HEX | RotoFab Res | Racing Brake Rotors | Self-Tuned w/ HPT
RobZL1 is online now   Reply With Quote
Old 12-11-2019, 04:04 PM   #3
Ls6jay
 
Drives: Camaro
Join Date: Aug 2019
Location: Michigan
Posts: 4
ok. i have a ls2 sbe. ls3 heads, ported snout lsa. 2.35 upper. 10% od lower. btr stage 4 pds cam. all supporting mods.
Ls6jay is offline   Reply With Quote
Old 12-12-2019, 11:33 PM   #4
CJ27
 
Drives: Chevrolet camaro zl1
Join Date: May 2019
Location: Tajas
Posts: 37
Quote:
Originally Posted by Ls6jay View Post
ok. i have a ls2 sbe. ls3 heads, ported snout lsa. 2.35 upper. 10% od lower. btr stage 4 pds cam. all supporting mods.
Are you just wanting some rwhp estimations?
__________________
2014 Sliver ZL1. Magnuson, SW long tubes, AFCO H/E, BTR Stage 2, flex fuel sensor, meth injection. 760rwhp e85. 680 on 93.
CJ27 is offline   Reply With Quote
Old 12-13-2019, 06:35 AM   #5
Ls6jay
 
Drives: Camaro
Join Date: Aug 2019
Location: Michigan
Posts: 4
Just want to see how well the cam works. My combo is going in to a 3000# car. I know it will run some numbers.
Ls6jay is offline   Reply With Quote
Old 12-13-2019, 08:44 AM   #6
JB'sZL1

 
Drives: 2013 ZL1 and 2019 Ram Laramie
Join Date: May 2017
Location: Milwaukee
Posts: 917
Quote:
Originally Posted by Ls6jay View Post
Just want to see how well the cam works. My combo is going in to a 3000# car. I know it will run some numbers.
How in the world did you get a Camaro to 3,000 pounds?
JB'sZL1 is offline   Reply With Quote
Old 12-13-2019, 05:46 PM   #7
Ls6jay
 
Drives: Camaro
Join Date: Aug 2019
Location: Michigan
Posts: 4
a gutted 1995.
Ls6jay is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.