07-18-2018, 01:30 PM | #1 |
Drives: 1999 Camaro SS Join Date: Apr 2016
Location: Denver
Posts: 275
|
Overdrive pulley...
So what OVERdrive balancer set up is everyone running that is no LSA?
How much overdrive are you running, ex. 8%, 10%, 12% etc Does ATI make a complete 8 or 10 rib pulley kit? Thanks |
07-18-2018, 01:54 PM | #2 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
10 rib ati 6% od here
Sent from my SM-N950U using Tapatalk |
07-18-2018, 03:48 PM | #3 |
Drives: 1999 Camaro SS Join Date: Apr 2016
Location: Denver
Posts: 275
|
NICE!!! why only 6%? because 10 rib?
^^ Can I get that part # by chance? |
07-18-2018, 05:58 PM | #4 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
The bottom one 10 rib, 6%od is the max
Sent from my SM-N950U using Tapatalk |
07-22-2018, 06:48 PM | #5 |
|
I believe Innovators West offers a 10% OD, as well as a complete pulley kit.
|
07-23-2018, 02:17 PM | #6 |
Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010
Location: Atlanta, GA
Posts: 499
|
You should look at diameters instead of % with these. Innovators West say 10% but it's actually an 8" crank. The ATI 6% OD balancer is actually 8.19" so bigger than the Innovators. ATI 4% OD is 7.95" and that's what I have.
I never understood Innovator's % because they say std diameter is 7.25" when it's really 7.5" on our cars. |
07-23-2018, 02:26 PM | #7 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
My ati od 10 rib balancer us 6% od. 8.19
Sent from my SM-N950U using Tapatalk |
07-24-2018, 01:32 PM | #8 | |
Drives: 1999 Camaro SS Join Date: Apr 2016
Location: Denver
Posts: 275
|
Quote:
|
|
07-25-2018, 09:44 AM | #9 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
All of the percentage calculations were made based on the LS1 Corvette back in the 90s, GM has since changed the balancer standard size many times so what is listed as a 10% over the old LS1 might only be a 4 or 6% on the LS3.
I got bit by this back in 2010 when we purchased an IW Standard size 8 rib and ended up with less boost on a Maggie, turns out the standard size is not standard for an LS3.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
07-25-2018, 10:55 AM | #10 |
Drives: 1999 Camaro SS Join Date: Apr 2016
Location: Denver
Posts: 275
|
So does anyone know the standard size of a stock 2012 Camaro LS3 balancer?
Been looking online and from what I found is 7.7" Can anyone confirm? |
|
|
|
|