You are browsing camaro5 
 |
|
03-24-2021, 11:56 PM
|
#1 |
 Drives: 2010 Camaro SS Join Date: Jan 2019
Location: Saint Charles MO
Posts: 85
|
E85 Kit Alternatives
I have a 2010 SS and have purchased a E85 Harness for 74 Dollars and an actual GM Flex Fuel Sensor for 56 Dollars. What is a GM Part Number for a Fuel Line like they use in the kits?
|
|
|
|
03-25-2021, 08:25 AM
|
#2 |
        
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,729
|
The kits I have seen did not use GM parts for the lines. They used EFI to AN adapters and AN lines. Summit has all that stuff.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|
03-25-2021, 08:28 AM
|
#3 |
|
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
The DXS kit is complete, well engineered, and comes with lucid complete install instructions. Worth the extra bucks to not have to piece it together yourself...
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|
03-25-2021, 10:01 AM
|
#4 |
Drives: 2012 Camaro SS Join Date: Dec 2019
Location: New York
Posts: 1,434
|
https://www.lethalgarage.com/collect...2015-camaro-ss
Lethal garage sells it with a OEM fuel line I just don’t know the part number
__________________
2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!
|
|
|
|
|
03-25-2021, 02:26 PM
|
#5 |
  
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Look at Motion Race Works they have a cool set up?
https://www.motionraceworks.com/coll...n-6an-8an-10an
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
03-28-2021, 11:19 PM
|
#6 |
|
Drives: 2010 Camaro SS Join Date: Jan 2019
Location: Saint Charles MO
Posts: 85
|
I totally appreciate all the replies. I am simply looking for a Part Number of a GM Fuel Hose that will work for this. If I find it cheap enough, I will save over 100 Dollars if I had bought a kit. I already have a new harness and Flex Fuel Sensor
|
|
|
|
|
|
|
|
 |
|
|
