Hurst Shifter Fix - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

patternpilot · 06-05-2012, 11:17 PM

I assume all responsibility.

MustangKiller · 06-05-2012, 11:30 PM

It would be great if you guys could answer my poll im going too make every effort i can too get somthing done about this. Good job NH-SS keep up the good work!

!!!

toml_pa · 06-06-2012, 07:36 AM

Quote:

Originally Posted by NH-SS

Funny you should mention that,.. As I'm getting ready to start making these bushings, writing directions on how to install them. I'm concerned about in propper installation and any potential issues that may arise from that.
While I have over 10k on mine,.. and it's still pretty much perfect. There is the question of any liability.
Comments ??

As far as the Hurst warranty goes (didn't even know there was one), the only way they will know you replaced their bushing is if you tell them. If you have to send it back, just put their bushing back in first. Here is a link to Hurst's installation instructions and here is a link to Hurst's install video. I wouldn't think any other instructions would be necessary.
Would also like to thank NH-SS for taking the time to make these bushings and to say I assume all responsibility for any disastrous events that may occur as a result of my installing this potentially dangerous bushing. LOL.

chetkan · 06-06-2012, 01:19 PM

I assume all responsibility and agree to not hold you liable for any damages whatsover as a result of me installing the bushing that you manufactured to correct a known problem that the original manufacturer should've caught before releasing the product to the public.

NH-SS · 06-06-2012, 01:27 PM

Amen,..!!

J-Rod6410 · 06-06-2012, 01:37 PM

I'll take a set also asap!!

I've been trying to reach Hurst for 3 weeks now on 3 different numbers! They dont answer the phone and they dont return messages.

I can see why their shifter is half price now from when I bought mine. I've already replaced the bushings so many times I can do it with my eyes closed

And I dont need install instructions and I assume all liability for using the bushings you're making!

Thanks!

Are they ready????????????

vam5555 · 06-06-2012, 01:41 PM

I'd be interested in a set, when they are ready. I haven't put my shifter in yet, but I'd like to have your bushing ready in the event that the shifter starts to experience the problems everyone here has.

I'm good with taking full responsibility if something goes wrong with my car.

My Car, My Choice!

NH-SS · 06-06-2012, 02:25 PM

First run of bushings should be ready next week. I will keep you posted.

J-Rod6410 · 06-06-2012, 03:53 PM

Quote:

Originally Posted by NH-SS

First run of bushings should be ready next week. I will keep you posted.

Let me know as soon as they're ready!!

Smirnoff · 06-06-2012, 04:49 PM

Quote:

Originally Posted by NH-SS

First run of bushings should be ready next week. I will keep you posted.

Appreciate the update!

HtownSS · 06-06-2012, 06:38 PM

No worrys man, don't need any stinking instructions, done it to often, I accepted full responsibly.

cuda_z28 · 06-09-2012, 11:10 AM

I will take 2

Whipped416 · 06-09-2012, 12:37 PM

blazzin i believe i am first on the list.. as i was the one that contacted him about making me one

blazzin1 · 06-09-2012, 05:10 PM

Quote:

Originally Posted by Whipped416

blazzin i believe i am first on the list.. as i was the one that contacted him about making me one

Well, not to argue, because I'm sure we can both get a set. But if you look at post #3, I was the first to suggest that he should make these and sell them! But either way, it doesn't matter.

06-05-2012, 11:17 PM	#43
patternpilot Drives: 2012 2SS/RS Join Date: Aug 2011 Location: Tri-Cities WA. Posts: 928 View My Garage	I assume all responsibility. __________________ There's more to life than gas mileage LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, 100 cell Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears.

06-05-2012, 11:30 PM	#44
MustangKiller Drives: 2013 2ss/rs A6 yellow !!!!! Join Date: Nov 2011 Location: Woodbine Maryland Posts: 659	It would be great if you guys could answer my poll im going too make every effort i can too get somthing done about this. Good job NH-SS keep up the good work!!!!

06-06-2012, 01:37 PM	#48
J-Rod6410 M6 9 second club Drives: A 4000 Lb BeaSSt Join Date: Jul 2009 Location: Crackin Azz on a hi-way near you Posts: 1,033 View My Garage	I'll take a set also asap!! I've been trying to reach Hurst for 3 weeks now on 3 different numbers! They dont answer the phone and they dont return messages. I can see why their shifter is half price now from when I bought mine. I've already replaced the bushings so many times I can do it with my eyes closed And I dont need install instructions and I assume all liability for using the bushings you're making! Thanks! Are they ready???????????? __________________ TEAM LS3 Best pass: 9.61 @ 146 with M6 TBDRWHP TBDRWTQ ECS S/C 408, YSi, m6, Mantic Triple, ZL1 diff #BuiltByJRod.... J-Rod's Speed Shop.... Tuned by: Matt Sorian @ MS Tuning Check out my youtube channel: http://www.youtube.com/user/6410Jrod Follow me on Instagram: @J_Rod6410

06-06-2012, 01:19 PM	#46
chetkan Haters gonna hate!!! Drives: 2011 Camaro 2SS/RS Synergy Green Join Date: Jun 2011 Location: Groton, CT Posts: 683	I assume all responsibility and agree to not hold you liable for any damages whatsover as a result of me installing the bushing that you manufactured to correct a known problem that the original manufacturer should've caught before releasing the product to the public.

06-06-2012, 01:27 PM	#47
NH-SS Drives: 2010 SS2,6M Join Date: May 2012 Location: NH Posts: 80	Amen,..!!

06-06-2012, 01:41 PM	#49
vam5555 Drives: 2017 2SS 6mt, garnet red Join Date: Apr 2012 Location: NoVA Posts: 105	I'd be interested in a set, when they are ready. I haven't put my shifter in yet, but I'd like to have your bushing ready in the event that the shifter starts to experience the problems everyone here has. I'm good with taking full responsibility if something goes wrong with my car. My Car, My Choice!

06-06-2012, 02:25 PM	#50
NH-SS Drives: 2010 SS2,6M Join Date: May 2012 Location: NH Posts: 80	First run of bushings should be ready next week. I will keep you posted.

06-06-2012, 06:38 PM	#53
HtownSS Drives: Silver 2SS, 68 Firebird 400,70 vett Join Date: Jul 2009 Location: clear lake Posts: 240	No worrys man, don't need any stinking instructions, done it to often, I accepted full responsibly.

06-09-2012, 11:10 AM	#54
cuda_z28 Drives: 1994 Quasar Z28, 2010 SIM 2SS, 6M Join Date: Mar 2009 Location: chicago Posts: 38	I will take 2

06-09-2012, 12:37 PM	#55
Whipped416 Drives: 2010 CAMARO SS Join Date: Mar 2011 Location: Texas Posts: 1,515 View My Garage	blazzin i believe i am first on the list.. as i was the one that contacted him about making me one