02-04-2014, 09:49 PM | #1 |
Drives: 13 F150 Eco 14 ZL1 650 RWHP Join Date: Sep 2013
Location: Lincoln California
Posts: 132
|
Header gaskets
Do headers constantly have problems with gaskets blowing out and bolts coming loose? Does it just depend on the product and who installs?
|
02-04-2014, 09:54 PM | #2 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
this isn't old school small block chevy stuff...most use the factory gaskets which are stamped steel with aftermarket headers. They rarely cause issues and the factory bolt holes have some thread compound in them. If they are properly torqued, you won't have any issues.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
02-04-2014, 10:02 PM | #3 | |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Quote:
Use the GM gaskets and you'll never have any issues. |
|
02-04-2014, 10:09 PM | #4 |
Drives: 2011 LS3 Join Date: Jan 2012
Location: el paso tx
Posts: 547
|
Never had any issues with mine coming loose or having leaks and ive had 2 sets on my car. The 1st set I used Mr.Gasket ultra seal and and my 2nd set Fel Pro. Never had a problem with either set having a leak. And I re used my OEM mannie bolts. OEM gaskets are higly recommended would of used them if the shop I got them installed at wouldnt have trashed them.
__________________
Vararam
Stainless Works Headers Vmax TB SLP loudmouth 2 Nightfury Cam Mike Norris CC Tuned by Southwest Speed |
|
|
|
|