10-18-2013, 07:43 PM | #1 |
Drives: 2013 Black 2 LT vert Join Date: Jul 2013
Location: kansas city
Posts: 1,765
|
taking sun visors off to peal off labels
have not noticed in recent threads but how do you take off the sun visors? i dont want to destroy them but want to peal off the labels and put visors back on. thanks
|
10-18-2013, 07:45 PM | #2 |
Drives: Camaro SS - Trans Am - Silverado Join Date: Jan 2008
Location: Southern, US
Posts: 1,638
|
I have seen some folks (on Ebay) that make decals that perfectly cover the air bag stickers.....but I'd be interested in hearing what other people have done !
__________________
|
10-18-2013, 08:21 PM | #3 |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
I had mine off when I replaced the roof liner. If I recall there's only two screws in the mount on the swivel side. Don't over-tighten them when you put them back on. They are only threaded into the sheet metal frame inside the roof.
I thought about trying to remove the label when mine were off. I don't think it's possible without it looking like shit. The label looks like it was "melted" into the plastic of the visor. Just find the stickers to cover them like mentioned above. It will look better.
__________________
|
10-18-2013, 08:25 PM | #4 |
Drives: Silver 2012 LFX Join Date: Sep 2012
Location: SE Virginia
Posts: 227
|
I sprayed other bumper stickers with plastic dip and stuck them over the labels.
__________________
|
10-18-2013, 08:29 PM | #5 |
Drives: 2014 1LE Camaro, 95 Z28 Camaro Join Date: Jun 2011
Location: America
Posts: 940
|
I guess if you have a 2014 they come right off.
We have a recall on them
__________________
2014 1LE 2SS Camaro Recaro seats, Custom Cam, Kooks LT headers, CAI intake, Z/28 Spoiler, Z/28 Belly Pan, Z/28 Brake Air Ducts, Stainless Steel breaklines, BMR Toe Rods and Trailing Arms resulting in 482.49 RWHP
|
10-18-2013, 08:40 PM | #6 |
Drives: 2013 Black 2 LT vert Join Date: Jul 2013
Location: kansas city
Posts: 1,765
|
i have a 2013 vert. they may be attached differently.
|
10-18-2013, 09:10 PM | #7 |
Drives: '86 Monte Carlo SS Join Date: Nov 2010
Location: Reno, NV
Posts: 3,119
|
|
10-18-2013, 09:35 PM | #8 |
Drives: 2013 Black 2 LT vert Join Date: Jul 2013
Location: kansas city
Posts: 1,765
|
I have a v6 . do women still loosen their clothes?
|
10-18-2013, 09:45 PM | #9 |
Drives: 2012 SIM 2LT Join Date: Jul 2013
Location: Flagstaff, Az
Posts: 30
|
Haha
|
10-18-2013, 09:53 PM | #10 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Just a couple of screws pulls them off like said be careful to not over tighten them on install.
As far as taking the label off wait for a hot day and they might just start to peel off if you pick at them enough. You will eventually end up taking them off by PATIENTLY heating them up with a hair dryer. Switch from side to side because the plastic on the headliner will want to stretch. Don't let it get too hot. Once they come off there might be the faintest shadow of where they were but a little Adams interior cleaner and then some conditioner and it looks fine. Good Luck! |
10-18-2013, 10:06 PM | #11 |
Drives: 2013 Black 2 LT vert Join Date: Jul 2013
Location: kansas city
Posts: 1,765
|
Ok thanks. but where are the screws at?
|
10-18-2013, 11:49 PM | #12 |
Drives: 2017 A10 ZL1 Join Date: Apr 2013
Location: Jupiter, Fl
Posts: 483
|
I just removed the labels on my visors about a hour ago. Take off the visors and then place a folded up paper towel that has been soaked with rubbing alcohol on them. Leave the paper towel like that for about a half hour, re-wetting it every 10 min. You then should be able to peel most of it off or just scrape it away with you finger nail. For the small amount of residue left over I used goo gone. You would never know there were labels there.
|
10-19-2013, 12:46 AM | #13 |
Drives: 2013 Full Bolt on LFX M6 Join Date: Jan 2013
Location: Chicago,Illinois
Posts: 417
|
All this "remove the visors" is crap when it comes to removing the stickers. All you honestly have to do is take a hair dryer on low speed and run it over the sticker for a few seconds. This loosens the glue. Then peel up a corner with your finger nail, and get a good bite on it and peel it off with one slow pull. No need for chemicals, straining of the butt cheeks, AND ESPECIALLY REMOVING THE VISORS. Worked for me no problem, hopefully I didn't catch Ya too late!
__________________
|
10-19-2013, 01:48 AM | #14 |
Adam E. Lucchesi
|
I would love to remove mine. My 2012 V6 had them on there almost like they were part of the visor. But on my 2010 SS, they're already trying to peel away. I want to take it off, but I'm nervous it's going to create a mess. I'd rather look at the goofy sticker than a nasty sticker mess...
I remove stickers from guitars on a weekly basis [I'm a guitar tech], and depending on the finish, I have lots of chemicals and tricks to get stubborn sticker funk off. I'm just not sure about this plastic visor. |
|
|
|
|