LS3 Parts For Sale from 2011 Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tadams72 · 03-07-2015, 11:03 AM

I've got some parts from my 2011 LS3 that I am letting go as I won't need them on the new build. Shipping at buyers expense.

Full disclosure, all parts came out of my 2011 Camaro SS LS3. I had a valve spring failure on the number one intake valve that floated the valve into the piston. That piston is toast as is the cylinder head from that side. The engine never lost oil pressure (I was data logging the time so I know this to be fact). The engine had 9900 miles on it at the failure and had no less than 4 oil changes in that time. I only ran Mobil 1 5W30 full synthetic and I had the rev limiter set to 6350 so aside from the spring failure everything was extremely well taken care of. You can see some of the #1 piston did migrate through the intake to the other cylinders.

While some of the pistons may require a little cleanup and the valve seats should be checked as well, the bearing surfaces on everything look good visually and you can't snag a nail on anything. Minor scuffing on piston skirt coating but not abnormal. Pistons should clean up nice and the rods look perfect. Cam was awesome but probably not the right style for the HPDE events I was doing. Vengeance made 460+ rwhp with this cam and other mods. Noticeable lope. Really liked the attitude of the car with it.

A little video from before the spring failure. Cam was awesome!

http://youtu.be/vDyWgz0aeso

So if you are doing a stock or mild rebuild, these parts will save you some money.

(1) Stock LS3 intake manifold. - $100

(1) Stock shifter assembly. - $100

(4) Stock sway bar end links. - $50

(1) Intake manifold insulator. - $25

(8) Stock plug wires. - $20

(1) Engine Cover - $40

(1) LS3 Oil Cooler and Lines (no leaks) - (Sold)

(16) Comp Cams 5/16" .080 wall 7.4" hardened pushrods. - (Sold)

(8) Stock LS3 fuel injectors. - (Sold)

(1) LS3 Crankshaft (58 tooth reluctor) - (Sold)

(1) LS3 (0821) cylinder head. Complete with valves, seals, TEA double springs, titanium retainers. - (Sold)

(1) PowerBond 25% under drive balancer. - (Sold)

(7) LS3 Pistons with pins - (Sold)

(8) LS3 Rods - (Sold)

(1) Vengeance Racing Stage 2 Camshaft and LS3 Roller Lifters - (SOLD)
3 bolt, 227 int / 239 exh, .612 / .612, 112+3

Stock LS3 Clutch (2500 miles when removed) - (SOLD)

If your interested in any particular item and want more info, shoot me a PM. Happy to take additional pics, shoot some short video footage, or FaceTime for you to see the part in question.

Thanks for looking!

lsxrx7 · 03-08-2015, 08:20 PM

i'll take the clutch set
sent u a PM

45thCAMARO 2SS/RS · 03-08-2015, 08:28 PM

PM'D you

laurentj23 · 03-09-2015, 01:47 PM

Do you have the timing cover?
Valley plate?

mombo390 · 03-09-2015, 03:41 PM

was the stage 2 cam ever installed?

KW Baraka · 03-09-2015, 03:55 PM

Complete LS3 fuel rails with crossover tube?

Thanks!

KW

Nightmare2012 · 03-09-2015, 08:10 PM

I'll take the pair of the heads

tadams72 · 03-09-2015, 10:03 PM

Quote:

Originally Posted by Nightmare2012

I'll take the pair of the heads

Just one head. The other was damaged when it dropped a valve.

tadams72 · 03-09-2015, 10:04 PM

Nothing else for sale other than what is listed above. I've got a few people lined up on some of the items so far.

lxinms · 03-10-2015, 11:57 AM

Let me know if I'm the one who has dibs on the cam. I'd rather yours, but if it's not available I've found another.

tadams72 · 03-11-2015, 01:39 PM

Bump. Some tire kickers and one buyer so far. Thanks.

baggins · 03-11-2015, 05:48 PM

Ill take the pistons and rods. Text 9167518861 please

tadams72 · 03-12-2015, 09:08 PM

Rods are sold. Cam is pending. Bump for some good stuff remaining at a great price.

AquaRSSS · 03-13-2015, 04:11 AM

Did the clutch and flywheel sell?

03-08-2015, 08:28 PM	#3
45thCAMARO 2SS/RS xquest91x Drives: 2012 45th Anniversary 2SS/RS Join Date: Mar 2013 Location: Yuma, AZ Posts: 535 View My Garage	PM'D you __________________ 2012 45th Camaro 2SS/RS LS3 Driver Mod: Stage 5 Full Bolt-ons + Tune •418RWHP/420RWTQ• H/C + Bolt-ons + Tune •485RWHP/435RWTQ• Full BMR Stage 2&3 Suspension 3.91 1LE Gear Diff Swap MGW Short Throw Shifter

03-09-2015, 03:41 PM	#5
mombo390 Drives: 2014 SS 1LE Non-RS w/NPP & Recaro Join Date: Feb 2015 Location: Los Angeles Posts: 93 View My Garage	was the stage 2 cam ever installed? __________________ Loan Officer at Allied Lending Group, Inc. Current Rides: '14 Camaro 1SS 1LE, '04 Lexus LS430 Life's Too Short To Drive Boring Cars!

03-09-2015, 03:55 PM	#6
KW Baraka Drives: 2014 Chevy SS Join Date: Nov 2014 Location: San Antonio, TX Posts: 277	Complete LS3 fuel rails with crossover tube? Thanks! KW __________________ 1995 Impala SS -- Heads/Cam LS3 1996 Impala SS -- 398ci LL Solid Roller LT4 2014 Chevy SS --- 429ci Hydraulic Roller LS3

03-09-2015, 10:04 PM	#9
tadams72 When is enough ever... Drives: 2006 Silverado 2500HD CC/SB LBZ Join Date: Apr 2011 Location: Residence: Chula Vista, CA Home: Billings, MT Posts: 996 View My Garage	Nothing else for sale other than what is listed above. I've got a few people lined up on some of the items so far. __________________ The Project: 2011 Camaro 2SS/RS (ERL 427 Superdeck NA Monster) "Just like farmer engineering. Find the weak link and fix it, then find the next one." Salt Cat Racing

03-11-2015, 01:39 PM	#11
tadams72 When is enough ever... Drives: 2006 Silverado 2500HD CC/SB LBZ Join Date: Apr 2011 Location: Residence: Chula Vista, CA Home: Billings, MT Posts: 996 View My Garage	Bump. Some tire kickers and one buyer so far. Thanks. __________________ The Project: 2011 Camaro 2SS/RS (ERL 427 Superdeck NA Monster) "Just like farmer engineering. Find the weak link and fix it, then find the next one." Salt Cat Racing

03-07-2015, 11:03 AM	#1
tadams72 When is enough ever... Drives: 2006 Silverado 2500HD CC/SB LBZ Join Date: Apr 2011 Location: Residence: Chula Vista, CA Home: Billings, MT Posts: 996 View My Garage	LS3 Parts For Sale from 2011 Camaro I've got some parts from my 2011 LS3 that I am letting go as I won't need them on the new build. Shipping at buyers expense. Full disclosure, all parts came out of my 2011 Camaro SS LS3. I had a valve spring failure on the number one intake valve that floated the valve into the piston. That piston is toast as is the cylinder head from that side. The engine never lost oil pressure (I was data logging the time so I know this to be fact). The engine had 9900 miles on it at the failure and had no less than 4 oil changes in that time. I only ran Mobil 1 5W30 full synthetic and I had the rev limiter set to 6350 so aside from the spring failure everything was extremely well taken care of. You can see some of the #1 piston did migrate through the intake to the other cylinders. While some of the pistons may require a little cleanup and the valve seats should be checked as well, the bearing surfaces on everything look good visually and you can't snag a nail on anything. Minor scuffing on piston skirt coating but not abnormal. Pistons should clean up nice and the rods look perfect. Cam was awesome but probably not the right style for the HPDE events I was doing. Vengeance made 460+ rwhp with this cam and other mods. Noticeable lope. Really liked the attitude of the car with it. A little video from before the spring failure. Cam was awesome! http://youtu.be/vDyWgz0aeso So if you are doing a stock or mild rebuild, these parts will save you some money. (1) Stock LS3 intake manifold. - $100 (1) Stock shifter assembly. - $100 (4) Stock sway bar end links. - $50 (1) Intake manifold insulator. - $25 (8) Stock plug wires. - $20 (1) Engine Cover - $40 (1) LS3 Oil Cooler and Lines (no leaks) - (Sold) (16) Comp Cams 5/16" .080 wall 7.4" hardened pushrods. - (Sold) (8) Stock LS3 fuel injectors. - (Sold) (1) LS3 Crankshaft (58 tooth reluctor) - (Sold) (1) LS3 (0821) cylinder head. Complete with valves, seals, TEA double springs, titanium retainers. - (Sold) (1) PowerBond 25% under drive balancer. - (Sold) (7) LS3 Pistons with pins - (Sold) (8) LS3 Rods - (Sold) (1) Vengeance Racing Stage 2 Camshaft and LS3 Roller Lifters - (SOLD) 3 bolt, 227 int / 239 exh, .612 / .612, 112+3 Stock LS3 Clutch (2500 miles when removed) - (SOLD) If your interested in any particular item and want more info, shoot me a PM. Happy to take additional pics, shoot some short video footage, or FaceTime for you to see the part in question. Thanks for looking! Attached Images __________________ The Project: 2011 Camaro 2SS/RS (ERL 427 Superdeck NA Monster) "Just like farmer engineering. Find the weak link and fix it, then find the next one." Salt Cat Racing Last edited by tadams72; 07-27-2015 at 10:40 AM. Reason: Change in availability.

03-08-2015, 08:20 PM	#2
lsxrx7 Drives: ls1 Join Date: Feb 2015 Location: fl Posts: 5	i'll take the clutch set sent u a PM

03-09-2015, 01:47 PM	#4
laurentj23 Drives: s14 swapped vq35 Join Date: Sep 2014 Location: cartersville Posts: 16	Do you have the timing cover? Valley plate?

03-09-2015, 08:10 PM	#7
Nightmare2012 come find out;) Drives: stockish 2012 camaro ss Join Date: Oct 2012 Location: speed county Posts: 2,166 View My Garage	I'll take the pair of the heads

03-10-2015, 11:57 AM	#10
lxinms Drives: 2001 Camaro SS & 2005 Canyon ZQ8 Join Date: Apr 2014 Location: TX Posts: 150	Let me know if I'm the one who has dibs on the cam. I'd rather yours, but if it's not available I've found another.

03-11-2015, 05:48 PM	#12
baggins Drives: 65 mustang Join Date: Jan 2013 Location: sacramento, ca Posts: 59	Ill take the pistons and rods. Text 9167518861 please

03-12-2015, 09:08 PM	#13
tadams72 When is enough ever... Drives: 2006 Silverado 2500HD CC/SB LBZ Join Date: Apr 2011 Location: Residence: Chula Vista, CA Home: Billings, MT Posts: 996 View My Garage	Rods are sold. Cam is pending. Bump for some good stuff remaining at a great price. __________________ The Project: 2011 Camaro 2SS/RS (ERL 427 Superdeck NA Monster) "Just like farmer engineering. Find the weak link and fix it, then find the next one." Salt Cat Racing

03-13-2015, 04:11 AM	#14
AquaRSSS AquaRob Drives: ABM RS\SS; 69 427 Camaro; 1970 Z28 Join Date: Mar 2010 Location: Bagram Air Base, Afghanistan Posts: 648 View My Garage	Did the clutch and flywheel sell? __________________ Centerline, Weld, Holley, Nick Williams, GMPP, Diamond, ARP, Callies, Nelson Racing, Pro Torque, Strange, J&S Polishing, RMCR, AAC, MBRP, Flowmaster, FAST, Comp Cams, RX Performance, Aeroquip, Spectrum Powder-Coating, Current Performance, RX,TDub Racing, DSS, Fore Innovations, Aeroquip, Earl's, BMR, Ximpac, MPD,Street Scene, Blood, Sweat and Tears