Meth injection with LSA supercharger - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

supergt99 · 09-13-2016, 06:58 AM

Im thinking about adding meth to my lsa conversion. im seeing 12psi with my 2.5 pulley @14* timing and thankfully no knock on 93 octane yet. but i would like the added octane/safety from using meth. ive done some searching around the web and it seems that spraying pre blower will ruin the rotors. or so they say. but i never found any actual evidence of this happening. so for you guys spraying pre blower, how long have you done it this way? any damage to blower?

also i tried to find setups after blower but couldnt find anything. does someone make the spacer for the lid that i can use to spray meth?

Redlineviper · 09-13-2016, 07:24 AM

While methonal is corrosive it should not be sitting on your rotors. Inject it at the elbow pre throttle body like has been done for years.

schul274 · 09-15-2016, 08:10 AM

Let me know what you decide. I'm at the exact same spot as you. Meth is the next step for me as well

Sent from my SM-G935R4 using Tapatalk

supergt99 · 10-06-2016, 10:01 AM

got this setup done,ill try to post pics later. it was a DIY setup from another post on this board. but i ended up changing out the nozzle to snow 625ml instead of the mc master carr. didnt like mist size. boost went from 12 to 13psi. i pulled 4% fuel and still a little rich. at 16* timing. dont think i want to go any further on it. its plenty on the street. mix is 50/50.

09-13-2016, 06:58 AM	#1
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288	Meth injection with LSA supercharger Im thinking about adding meth to my lsa conversion. im seeing 12psi with my 2.5 pulley @14* timing and thankfully no knock on 93 octane yet. but i would like the added octane/safety from using meth. ive done some searching around the web and it seems that spraying pre blower will ruin the rotors. or so they say. but i never found any actual evidence of this happening. so for you guys spraying pre blower, how long have you done it this way? any damage to blower? also i tried to find setups after blower but couldnt find anything. does someone make the spacer for the lid that i can use to spray meth?

09-13-2016, 07:24 AM	#2
Redlineviper Drives: 2013 ZL1 Join Date: Jan 2015 Location: Orlando Posts: 936	While methonal is corrosive it should not be sitting on your rotors. Inject it at the elbow pre throttle body like has been done for years. __________________ 2013 A6 ZL1

09-15-2016, 08:10 AM	#3
schul274 Drives: 2011 Camaro SS2RS, 1970 Camaro SS Join Date: Aug 2015 Location: Milwaukee, WI Posts: 168	Let me know what you decide. I'm at the exact same spot as you. Meth is the next step for me as well Sent from my SM-G935R4 using Tapatalk

10-06-2016, 10:01 AM	#4
supergt99 Drives: 2013 Camaro SS 1LE Join Date: Oct 2014 Location: earth Posts: 288	got this setup done,ill try to post pics later. it was a DIY setup from another post on this board. but i ended up changing out the nozzle to snow 625ml instead of the mc master carr. didnt like mist size. boost went from 12 to 13psi. i pulled 4% fuel and still a little rich. at 16* timing. dont think i want to go any further on it. its plenty on the street. mix is 50/50.