hardened halfshafts? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*CamaroSpike23* · 10-09-2010, 03:06 PM

Quote:

Originally Posted by mikel441

Uncle Robin is a professional! His launch was one of the smoothest I have ever seen. The front end just picked up and the car motivated forward smoothly without any bumps or jerks. Thats why he can run stock axles.

driver mod ftw.

SC2150 · 10-10-2010, 02:49 PM

Quote:

Originally Posted by speedster

GForce1320, Hendrix, Drive Shaft Shop

I personally am using GForce1320.

All good with proven results.

Robin Lawrence · 10-11-2010, 01:19 PM

Just to be clear. My car has now run a best 60' of 1.56 on M/T 18" Radials.

It ran back to back 1.57 this weekend at the LSX Shootout. Best ET to date is a 10.76. I ran a 10.81 and a 10.84 at the LSX Shootout.

Trans is a trick 4L80E with a 2.75 first gear ratio. Also we have a Pro Torque Converters 4000 RPM Stall built to leave soft with the DR.

Rear is all stock. Bushings gears and half shafts are all stock.

Shift points are programmed in the controller. All I do is stab and steer.

Robin

import_killa · 10-14-2010, 11:10 AM

Quote:

Originally Posted by CamaroSpike23

Uncle Robin runs the stock rear axles with slicks on his 6XX rwhp LSA powered camaro. and he's cutting 1.60 60's with slicks...

all i can say is amazing

GFORCE1320 · 10-14-2010, 09:22 PM

We sell 2 versions of Camaro axles. Our 1000hp 4340 axles and our 1000+hp 300m axles.
We've got a perfect track record, nobody has ever broken a set of our Camaro axles

Give me a call if you want to talk about axles.

Thanks
Chris

BMR Sales · 10-15-2010, 09:07 AM

We recommend, use, and sell Gforce axles and their other products. Stock axles will only last you so long, we broke our stock axles launching our 535HP 2010 Camaro the first time out at the track with the TVS 2300. If any of you guys are looking for any of the GForce stuff give me a call and we can get you setup.

Kyle

devilish34 · 10-16-2010, 08:55 AM

Quote:

Originally Posted by GFORCE1320

We sell 2 versions of Camaro axles. Our 1000hp 4340 axles and our 1000+hp 300m axles.
We've got a perfect track record, nobody has ever broken a set of our Camaro axles

Give me a call if you want to talk about axles.

Thanks
Chris

This guy I have them in my G8. I along with other have already broke the stock axles.

10-11-2010, 01:19 PM	#17
Robin Lawrence Drives: 2010 Camaro 69 Nova Join Date: Oct 2008 Location: Galesburg, Illinois Posts: 447	Just to be clear. My car has now run a best 60' of 1.56 on M/T 18" Radials. It ran back to back 1.57 this weekend at the LSX Shootout. Best ET to date is a 10.76. I ran a 10.81 and a 10.84 at the LSX Shootout. Trans is a trick 4L80E with a 2.75 first gear ratio. Also we have a Pro Torque Converters 4000 RPM Stall built to leave soft with the DR. Rear is all stock. Bushings gears and half shafts are all stock. Shift points are programmed in the controller. All I do is stab and steer. Robin __________________ Holley Performance Products

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I am a hardened CRIMINAL!!!!!!!!!!!	gabraddock	USA - California	102	06-23-2010 07:45 PM
hardened wheel studs?	boostedyards86	Dragstrip and Launch Techniques Discussion	1	10-27-2009 11:33 PM

10-14-2010, 09:22 PM	#19
GFORCE1320 Drives: 05 GTO Join Date: Jul 2009 Location: Wichita, KS Posts: 1,243	We sell 2 versions of Camaro axles. Our 1000hp 4340 axles and our 1000+hp 300m axles. We've got a perfect track record, nobody has ever broken a set of our Camaro axles Give me a call if you want to talk about axles. Thanks Chris

10-15-2010, 09:07 AM	#20
BMR Sales Drives: Race Car Join Date: Sep 2009 Location: Seffner, FL Posts: 6,226	We recommend, use, and sell Gforce axles and their other products. Stock axles will only last you so long, we broke our stock axles launching our 535HP 2010 Camaro the first time out at the track with the TVS 2300. If any of you guys are looking for any of the GForce stuff give me a call and we can get you setup. Kyle