03-30-2017, 12:36 AM | #1 |
Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013
Location: Montgomery, AL
Posts: 1,265
|
Pegasus Whipple 10 rib Version 2
We finally had time to finish version 2 of the Whipple version of our 10 rib kit. Even with what many though of as horrible belt wrap (a little over half way), the car shown here made over 800 at the wheels the 6L80 on e85, at 15 psi with no signs of slip. It's a built motor with ported Brodix heads. More power than our first test car. That is with the belt shown that had a full rib missing, so it was only 9 ribs! Next step is more fuel pump, ran out of injector up top or likely would have made 850 or so.
Version 2 is much better belt wrap and moves the idler away from the tensioner. We had it come too close together one time on version 1, I didn't like it, so here we are. |
03-30-2017, 10:57 AM | #2 |
|
Nice! What's the retail, and what all comes in the kit?
|
03-30-2017, 11:03 AM | #3 |
Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013
Location: Montgomery, AL
Posts: 1,265
|
Cant post pricing in this thread. However, the kit comes with HD tensioner, both idler pullies, ps pulley, alt pulley. In addition, what set our kit apart in our opinion, is we include one blower pulley of your choice. Along with that, the water pump pulley is pre-installed on a new GM water pump, which takes the most difficult part of a 10 rib install and eliminates it. The only things we dont include are the balancer (because ATI is still out of stock, so you can source one from a dealer that may have one left or use a IW), and the belt.
|
04-01-2017, 09:43 AM | #4 |
Very nice. Looks like my procrastination turned out for the best. Will be in contact soon for the 10 rib whipple set up.
__________________
1967 Camaro Resto Mod. 468 roller. Tremec TKO600, 2011 Imperial Blue Metallic paint, full Hotchkis suspension, Wilwood disc brakes, Ron Davis radiator, Comp Cam, Custom aluminum air intake, custom valve covers, Rushforth rims, ET street radial IIs
|
|
04-01-2017, 02:42 PM | #5 |
Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013
Location: Montgomery, AL
Posts: 1,265
|
Thanks, I try to improve our products wherever and whenever we can! Anyone who already has the older version can contact me for the new bracket at cost.
|
08-29-2017, 07:24 PM | #6 |
Drives: Blown 2010 Orange camaro ss/rs Join Date: Mar 2010
Location: Calgary
Posts: 127
|
2012ls3vert. Tried to pm you but it says you are all full
|
08-30-2017, 07:46 AM | #7 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Is 102 mm TB clearance an issue.
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
09-09-2017, 10:49 AM | #8 |
Drives: 2012 2SSRS Vert, Black w/M6 Join Date: Jan 2013
Location: Montgomery, AL
Posts: 1,265
|
Sorry for the delay all. And Ted, I did the bracket where it uses a 2.4" idler pulley that should leave room for a 102mm TB.
|
01-08-2018, 10:02 PM | #9 |
Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011
Location: Southern California
Posts: 4,013
|
Hit me Up on the 10 rib Heartbeat Setup! We are looking for a solution.
|
01-09-2018, 07:40 AM | #10 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Nice
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
01-12-2018, 07:38 PM | #11 |
Drives: 2023 Camaro SS 1LE on order Join Date: Dec 2014
Location: Bowling green Va
Posts: 293
|
I have the version 1. How much to change to the version 2? While I have never had any belt slip I plan on going up in boost soon and would like the extra belt wrap
__________________
2017 Camaro SS 50th anniversary, I sold it but 2010 Camaro SS, whipple, cam, full bolt ons and full exhaust made 739/656 RWHP/TQ on 93 pump gas
|
06-26-2019, 12:26 PM | #12 |
Drives: 2010 camaro 2ss Join Date: Jun 2018
Location: Gainesville fl
Posts: 6
|
I know this is old but does anyone know how to get ahold of this company to order the v2 idler I tried to look them up and found a number I've called several times and noone has answered
|
06-27-2019, 04:20 AM | #13 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
What size is the balancer pulley? I am looking for a 10 rib larger than 7.8". Can it be purchased separately?
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
06-05-2021, 01:05 AM | #14 |
Is this another vendor that went out of business???
|
|
|
|
|
|