06-25-2018, 06:42 PM | #1 |
Drives: 2011 L99 2SS Join Date: Oct 2017
Location: South Island, New Zealand
Posts: 120
|
Reversing Camera
I'm looking for a decent good priced HD reversing camera with about 170*.
And a front camera with maybe 135* Any suggestions or advice from anyone that's installed cameras on a 2011 SS would be a huge help. |
06-27-2018, 02:10 PM | #2 |
Drives: 2011 L99 2SS Join Date: Oct 2017
Location: South Island, New Zealand
Posts: 120
|
Anyone?
|
06-27-2018, 04:22 PM | #3 |
Drives: 2010 Camaro 2LT/RS Join Date: Nov 2016
Location: New Jersey
Posts: 35
|
I used this one hooked up to my Pioneer head unit. It works great.
https://www.amazon.com/Esky-EC170-06...A2B78XWGM8KN92 |
06-27-2018, 07:46 PM | #4 |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2013
Location: San Jose, California
Posts: 1,371
|
__________________
|
06-28-2018, 01:33 AM | #5 |
Drives: 2011 L99 2SS Join Date: Oct 2017
Location: South Island, New Zealand
Posts: 120
|
Thanks! Appreciate you guys helping me. Very limited help in my area.
I rang a guy today that sells many different cameras and he refused to help me. Told me to bring the car in. I would have but he was in a different island and 1050 miles away. I gave up. How a business with service like that survives is beyond me. |
07-02-2018, 03:28 AM | #6 | |
Drives: 2014 LS Join Date: Apr 2014
Location: United States
Posts: 95
|
Quote:
|
|
07-03-2018, 07:37 AM | #7 |
Drives: 2011 Inferno Orange Camaro 2SS/RS Join Date: Nov 2011
Location: Pittsburgh, PA
Posts: 1,368
|
Not enough information. Do you have the oem radio? aftermarket? Mylink upgrade? Do you have camera inputs? will you be using your phone to view or a dedicated screen?
|
07-03-2018, 05:43 PM | #8 | |
|
Quote:
Ah someone asking the right questions . I have a Kenwood camera attached to my JVC head unit .
__________________
Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.
|
|
07-04-2018, 03:53 AM | #9 |
Drives: 2011 L99 2SS Join Date: Oct 2017
Location: South Island, New Zealand
Posts: 120
|
I’m fitting a Kenwood DDX9018DABS which has two camera inputs.
|
07-04-2018, 12:55 PM | #10 |
|
This is the one I have . https://www.amazon.com/Kenwood-CMOS-.../dp/B00WH0R2Y8 There are cheaper ones out there that will probably work too. I Found the guide lines are actually built into the head unit not the cam.
__________________
Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.
|
07-06-2018, 02:20 AM | #11 | |
Drives: 2014 LS Join Date: Apr 2014
Location: United States
Posts: 95
|
Quote:
|
|
07-06-2018, 04:00 AM | #12 |
Drives: 2011 L99 2SS Join Date: Oct 2017
Location: South Island, New Zealand
Posts: 120
|
Thanks everyone. I ended up spending $18 so hopefully it will work fine. I used the ones you guys suggested to get an idea of specs etc and went for it. In fact I got 2 so I can pop one up front.
|
|
|
|
|