10-21-2011, 10:54 PM | #1 |
Kevin
Drives: Black 2011 Camaro 2LT - RS Join Date: Oct 2011
Location: Copperas Cove, Texas
Posts: 60
|
GROUND EFFECTS HELP :O
Hi everyone... I really need some help if yall can?
I want some ground effects for my new Camaro v6 RS baby... but I have a few questions first?? After weeks of looking... I finally found extremedimensions.com, and was totally ready to order from them (had bank card in hand!!). They had the 2 styles I was looking for, (Razzi Racer, & OEM chin splitter), and they allow for individual piece ordering, as I don't want the whole kit... I just want the front and 2 side skirts... no back. But the more reviews I read, the more confused I become. I read both on here, and on the internets "Go w/ THIS company... they're the BEST!!", then I read "THIS company SUCKS & their parts don't fit for ass... go w/ THAT company instead." UUGGGHHHH!!!!! So I guess what I would like to know is... (1) What manufacturer do you suggest I buy from, that you've had the best experience with... and (2) what type of kit do you think would look best on my C5 v6 RS Camo? The Razzi Racer which drops the profile nice and low on the front, as well as some wicked angled sideskirts!? Or the OEM style chin splitter that is more flat and forward, but equally as sweet looking... w/ more subdued sideskirts that better match the Camos' original lines. UUGGGHHHH, I cant decide!? Thanks for your help in advance everyone... Kevin |
10-22-2011, 02:28 AM | #2 |
NM HT5
|
Dont buy from extreme Dimensions, I made that mistake, theyre parts are just replica RAZZI kits and are not very good, if Your gonna buy the razzi Sideskirts make sure they are Razzi
heres some pics of the Razzi i like it better then the OEM because its different with 1" lowering springs |
10-22-2011, 02:58 AM | #3 |
Drives: Rally Yellow 2010 Camaro 2SS/RS M6 Join Date: Dec 2010
Location: Fairhope, Alabama
Posts: 341
|
I also like the razzi kits. However, i think the factory kits look better, they just dont give the car the same low agressive stance that the razzi kit does.
__________________
Rotofab CAI, SW LT Headers and High Flow Cats, SW Cat-Back, Eibach Pro rear wheel spacers, SS Grill Insert, Street Scene Front Splitter, Blacked out rear emblem, blacked out bezels, plasti-dipped lower bumper, plasti-dipped rims with yellow pinstriping, dyed interior stitching yellow, 2x Kicker CVR 12's w/ 1200 watt kicker amp. MORE TO COME! |
10-23-2011, 12:31 AM | #4 |
Wind Rider
Drives: ZL1 19 White; Jeep 5.7 GC 15 Join Date: Jan 2010
Location: Muscat
Posts: 2,059
|
Well I went for the Razzi kit, but I removed the rear diffuser because of the exhaust heat and buzz!
__________________
Im not Gray any more !!
|
10-23-2011, 08:35 PM | #5 |
NEcamaro5
|
I went with the razzy front and gm side and back.dopped the car 1.25 also
|
10-23-2011, 08:39 PM | #6 |
OKCamaros
Drives: 4 banger Diesel Join Date: Mar 2010
Location: Philippines
Posts: 4,572
|
I prefer the OEM GFX or the Street Scene Kit. also like the ASC one but its not really a kit since its just a front splitter.
|
10-23-2011, 08:50 PM | #7 |
Drives: 2011 Victory Red LS Join Date: Jan 2011
Location: Central Jersey
Posts: 286
|
I think the OEM GFX and razzi are the two best body kits out there imo, i like the street scene but it goes on with double sided tape, i would rather have a body kit that gets bolted on but thats just me
|
10-23-2011, 10:48 PM | #8 | |
Drives: '11 Camaro RS 2LT Join Date: Jun 2011
Location: Kingwood,TX
Posts: 666
|
Quote:
__________________
|
|
10-23-2011, 10:55 PM | #9 |
Drives: '11 Camaro RS 2LT Join Date: Jun 2011
Location: Kingwood,TX
Posts: 666
|
I agree. I could handle some tape but it would have to be secured with bolts in my opinion because after time the tape is going to give out and leave your expensive molding laying on the side of the highway or worse yet sued by someone it hit when it fell off! lol.
__________________
|
10-24-2011, 08:25 AM | #10 | |
Treasure Coast Camaro 5
Drives: 2010 Camaro 1LT/RS RJT Join Date: Aug 2010
Location: Fort Pierce, Florida
Posts: 1,317
|
Quote:
__________________
|
|
10-25-2011, 07:03 PM | #11 |
Kevin
Drives: Black 2011 Camaro 2LT - RS Join Date: Oct 2011
Location: Copperas Cove, Texas
Posts: 60
|
Thanks so far everyone for the responses & help. & yes Ozzie, I'm more interested in getting quality, or the "real" thing, and not some knock-off junk part, and I don't want to get ripped-off as far as price goes either. I also just wanna guage what styles everyone has on their baby, to maybe help sway me one way or the other.
It's tough... still lovin' that Razzi, but the OEM is like "Hey... look over here!!" It just cost SO damn much more than the Razzi you know? I mean for the original GM factory made part, its like 2k for the whole kit UNPAINTED :O & I dont even want the whole kit... I just want the front & 2 sides in whatever style I go with. UGH!!!! But thanks again for the help so far guys... & keep the pics comin' too, it helps in the decision process Later bros... Kevin |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Factory Ground Effects Vs No Ground Effects | SOPMOD | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 6 | 11-27-2010 09:51 AM |
Ground effects before or after your buy your Camaro? | LED Crazy | 5th Gen Camaro SS LS LT General Discussions | 12 | 08-16-2010 11:24 AM |
How to take off front bumber with ground effects? | Chad's ZL1 | Camaro DIY & HOW-TO instructions & discussions | 4 | 08-03-2010 07:57 PM |
Gm ground effects kit | ~Stacy~ | Cosmetics and Lighting Modification Discussions | 12 | 04-13-2010 02:09 PM |
News on Ground Effects? | DkknightX | 5th Gen Camaro SS LS LT General Discussions | 7 | 06-22-2009 11:10 AM |