JANNETTY RACING ZL-1 BACK ON THE DYNO

[JANNETTYRACING]

Originally Posted by ss/rs-matt

Just ordered my JRE 125 rwhp kit! What is estimated crank HP with this kit?

Thank you for your order, you are going to love it, I ran this package on my personal ZL-1 for over 3 years Mine was an auto I estimated 700 RWHP.

My car went 11.0 ET 125 MPH on a drag radial, I road coarsed the car regularly and took my wife out to dinner could not be more pleased with a power package that does it all.

Ted.

[Botta07]

Originally Posted by U LUZE

Mickey Street ET R. They hook on the track and the street.

Did you also do a cam or just the 22% pulley, headers, injectors etc? I read on a thread here that anything over 18% pulley without a cam and your pumping heat. Have you had issues with your setup? Is it your daily driver or no? i ask because I'm thinking of doing the same setup as you i.e. 22% Pulley, headers, ID850s, hx, CAI, BAP, stock cam tho...

[silversleeper]

Originally Posted by JANNETTYRACING

Thank you for your order, you are going to love it, I ran this package on my personal ZL-1 for over 3 years Mine was an auto I estimated 700 RWHP.

My car went 11.0 ET 125 MPH on a drag radial, I road coarsed the car regularly and took my wife out to dinner could not be more pleased with a power package that does it all.

Ted.

Did I not follow along? I think he asked what the estimated crank hp is, with the 580hp stock plus the 125hp kit, and you said about 700 at the crank? Not rear wheel.
I'm still enjoying your kit and tune and might contact you for more pulley if my fuel looks to be able to keep up with it.
Do you have a sample logfile or something we can load to hptuner to get the correct pids to save a logfile for you to review the tune? I get most things but think IAT isn't there.

[U LUZE]

No cam. It's my daily and I haven't had any issues.

[JANNETTYRACING]

Originally Posted by silversleeper

Did I not follow along? I think he asked what the estimated crank hp is, with the 580hp stock plus the 125hp kit, and you said about 700 at the crank? Not rear wheel.
I'm still enjoying your kit and tune and might contact you for more pulley if my fuel looks to be able to keep up with it.
Do you have a sample logfile or something we can load to hptuner to get the correct pids to save a logfile for you to review the tune? I get most things but think IAT isn't there.

580 is crank hp not rear wheel hp.

RWHP varies with auto or manual roughly 600

[ss/rs-matt]

Scheduled for the 29th to have the car on the dyno. Paid Ted for a second 93 octane tune so I can hopefully reach my goal of 600 rwhp!