Atlanta Club Lounge

[CamaroKid300]

Originally Posted by musclecargirl

We got caught in some serious rain. Out of the blue, I felt a rattle through the floor and car started making a noise like the cats and exhaust had sprung a leak. We all pulled into a truck stop to have a look. Someone said some water may have gotten sucked in somewhere (too technical for me) or something like that. We sat for a few minutes, started down the road again and all was fine. Luckily, seems like it was some freak kind of thing.

Good deal! I sure hope that's all it was!

[ken53007]

Glad you got home safe gina had a lot of fun with you guys

[Dexcam1]

[QUOTE=dodojoe;5397940] Hope I didnt hurt any feelings with my comments, especially Dexter about his tinted lights and Ken about your reverse gear location! QUOTE]

Not at all dodojoe.



[QUOTE=driser;5400824]
I guess Dex made it home..probably cleaning all of those shoes he brought with him. He had a pair of tennis shoes that were the same age as Chip, and looked brand new

QUOTE]


Yeah, I got home somewhere between 3:30 and 4:00

[colemanvoice]

Originally Posted by Toyaholic

Like the demo on the website, too.

Thanks Mike. Let me know if you ever need anything.

[CamaroKid300]

Guys, I'm in need a good, reasonably priced powder coater. Need my wheels done, my plasti dip is messing up terribly. Thanks.

Originally Posted by colemanvoice

Thanks Mike. Let me know if you ever need anything.

Dan,

I always had thought that you would do a good job at things like that with your always calm and collected voice. Nice to know I was right!

[572HP]

Originally Posted by CamaroKid300

Guys, I'm in need a good, reasonably priced powder coater. Need my wheels done, my plasti dip is messing up terribly. Thanks.

Reasonably priced and the best around:
thepowdercoater.com (mike@thepowdercoater.com)
Mike is his name...and he'll do the job right. He is in loganville, and you can take them to his house. Several of us have used him for all kinds of things.

[hightower]

J.T. I know where you can get them done for $50 a wheel.

[csjcsj]

Originally Posted by hightower

J.T. I know where you can get them done for $50 a wheel.

Be careful with the $50 a wheel people! Lol! My wheels are flaking off for the $50 a wheel! They need to be sandblasted and cleared so it will stay which usually runs a little extra! Someone correct me if I'm wrong!!!!

[CamaroKid300]

Originally Posted by 572HP

Reasonably priced and the best around:
thepowdercoater.com (mike@thepowdercoater.com)
Mike is his name...and he'll do the job right. He is in loganville, and you can take them to his house. Several of us have used him for all kinds of things.

I'm going to give him a call tomorrow. Hopefully he can get me in quick if I can afford to go with him. Need it done before I go back to AU.

Originally Posted by hightower

J.T. I know where you can get them done for $50 a wheel.

It's tempting, but I do want it done right. PM me what you got.

Originally Posted by csjcsj

Be careful with the $50 a wheel people! Lol! My wheels are flaking off for the $50 a wheel! They need to be sandblasted and cleared so it will stay which usually runs a little extra! Someone correct me if I'm wrong!!!!

Yeah, I'm going to make sure its a quality job. I really like my wheels black, and don't really feel like peeling off the plasti dip lol

[csjcsj]

Jt, send me a pm on his costs! May be looking for a redo eventually!!!

[CamaroKid300]

Originally Posted by csjcsj

Jt, send me a pm on his costs! May be looking for a redo eventually!!!

Will do.

Heck, with the money you are spending with Ron they should throw in a free re coat for you!

[CamaroKid300]

Alright, I ended up getting a quote. Mike was really backed up so he referred me to another guy.

Question #2....do any of you have (for some odd reason) have a set of rims and tires laying around I could throw on my car for a day or two while I have this done? If not its not a big deal!

PS- Well now I found out I'm gonna be looking at $100 more to get my tires unmounted, remounted, and balanced along with new valve stems or something (new seals for the TPMS?)

I really didn't think about how much that was going to cost. I got quoted $45/wheel but he said that might go up a little bit depending on if sandblasting takes longer than what he plans. Max anyone has ever paid was $65 a rim.

Erg so I'm looking at roughly $300 to get this done....but its so close to the time I need to go back to school i'm not sure if I want to risk it.

[driser]

The price sounds reasonable to me, if it is done right. Where did Mike send you?

[csjcsj]

Yes you have to get new valve stems for the TPMS! Roughly $8 apiece at the dealerships! Shouldn't take but a day! Maybe 2! The night before jack your car up, put it on stands, be at the door of a tire shop when they open! Then take the rims straight to him!

That's what I did!