01-21-2021, 06:15 PM | #1 |
Drives: 2010 Camaro V6 LT Join Date: Jan 2021
Location: Toronto
Posts: 12
|
Strut clearance question
Hey Guys,
So I'm looking to do a new 20x10 staggered setup. Suspension's stock although I may do the BMR 1" lowers. Question is can I run 20x10 ET35 285/40/20 front and 20x10 ET25 285/40/20 rear without getting into any rubbing or fitment issues? Last edited by burna; 01-25-2021 at 11:07 AM. |
01-25-2021, 11:07 AM | #2 |
Drives: 2010 Camaro V6 LT Join Date: Jan 2021
Location: Toronto
Posts: 12
|
Bump, please help!
I'm thinking 285/35/20 now, but it's clearing the strut is what im worried about with +35et upfront on a 20x10 |
01-25-2021, 04:33 PM | #3 |
Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010
Location: Clermont, IN
Posts: 3,297
|
You'll be fine. But it needs to be reversed....+25 front and +35 rear.
__________________
2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419.
Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!! |
01-25-2021, 06:35 PM | #4 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
I run 20x10(35) tsw's square setup and have to use a 5mm spacer up front. This is lowered a little on BC coilovers as well. And I run 305/35 Hankook RS-3 up front.
|
01-25-2021, 08:37 PM | #5 |
Drives: 2010 Camaro V6 LT Join Date: Jan 2021
Location: Toronto
Posts: 12
|
Mhhh wonder if I could do the 285 upfront with +35 without the spacer. Reason being I'd like the rear wheels to stick out (just a bit) more than the front. (I dig the staggered look)
|
|
|
Tags |
20x10, setup, staggered, wheel |
|
|