WE MADE IT... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Barton Industries · 04-14-2010, 09:36 PM

Well guys we made it to the host hotel for the Camaro5 fest. The trip was a little difficult but we made it in one piece.
We left central NY and got about 9 hours of driving under our belts before we stopped for a hotel. We left the next morning at about 6am and got about 1-1/2 hours down the road and realized we left something at the hotel room

turned around and went back, and then we got on the road again.

We were about 1 hour away from the Host hotel in Valdosta Ga when we had a blow out on our trailer

luckily we where ok and the truck behind us was able to change lanes in time to avoid the tire and there was no on coming traffic. The trailer didn't have a spare (brad new trailer) but I was able to find a used car tire at shop just a few miles up the road. So tomorrow I will be hunting down a NEW TRAILER tire.

Hope to see everyone there.

BackinBlackSS/RS · 04-14-2010, 09:40 PM

Good lord, you really had some problems. Well, your ok and your there. Hey, do I remember you saying one time you guys were gonna do the SS emblem in the 5th gen font for the front grille and the back?

topgun1 · 04-14-2010, 09:40 PM

glad you guys made it down ok after the adventure. Let the games begin!

*GTAHVIT* · 04-14-2010, 09:47 PM

Wow!

Glad you guys made it in safe and sound.

orange10s.c. · 04-14-2010, 09:48 PM

Well atleast you and the car or OK !!!!!!!!!!!!!!!!!!

OuSoonersGirl · 04-14-2010, 09:50 PM

Ouch, but glad you made it!

Little · 04-14-2010, 09:53 PM

Sounds like you had a rough go of it. Glad you made it OK. Welcome to (or back, which ever the case may be) South Georgia.

Indpowr · 04-14-2010, 09:56 PM

Can not wait to see your car...

*mlee* · 04-14-2010, 10:03 PM

Sit back relax tonight and the Cavalry will arrive soon...

Barton Industries · 04-14-2010, 10:08 PM

Thanks guys, It was still a good time despite the problems. Just getting out of the shop and being away from the machining aspect, is great

This will be our first event so I'm really looking forward to it.

Backinblack- YES, we have come up with a SS emblem for the front grill that replaces the factory bowtie

It's machined from a sold piece of billet aluminum and fits just like the bowtie did. No bolts, no glue, just pop out the bowtie and pop in the SS. Below the SS it reads 376

It is on my car so come by our booth and check it out. It wont be available for a while however, I want to get some feed back on it and see if people want it for what its going to cost to machine. I will also have to get a GM trademark license for it. But if there is a demand, it will get done

tjbusa · 04-14-2010, 10:29 PM

Well the rest of the time there and your trip back ought to be uneventful, sounds like you've burned up all the bad luck.

BackinBlackSS/RS · 04-14-2010, 10:37 PM

Quote:

Originally Posted by Barton Industries

Thanks guys, It was still a good time despite the problems. Just getting out of the shop and being away from the machining aspect, is great

This will be our first event so I'm really looking forward to it.

Backinblack- YES, we have come up with a SS emblem for the front grill that replaces the factory bowtie

It's machined from a sold piece of billet aluminum and fits just like the bowtie did. No bolts, no glue, just pop out the bowtie and pop in the SS. Below the SS it reads 376

It is on my car so come by our booth and check it out. It wont be available for a while however, I want to get some feed back on it and see if people want it for what its going to cost to machine. I will also have to get a GM trademark license for it. But if there is a demand, it will get done

I can't make the fest. :( Can you post a pic of it? Thanks!

edog · 04-14-2010, 10:49 PM

Well, the worst is behind you for a few days. Glad you made it! Will see you soon.

AlSuwaidi · 04-14-2010, 11:43 PM

wohoooo am exited from half way round the world... cant wait to see what you all get up to!

04-14-2010, 09:36 PM	#1
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	WE MADE IT... Well guys we made it to the host hotel for the Camaro5 fest. The trip was a little difficult but we made it in one piece. We left central NY and got about 9 hours of driving under our belts before we stopped for a hotel. We left the next morning at about 6am and got about 1-1/2 hours down the road and realized we left something at the hotel room turned around and went back, and then we got on the road again. We were about 1 hour away from the Host hotel in Valdosta Ga when we had a blow out on our trailer luckily we where ok and the truck behind us was able to change lanes in time to avoid the tire and there was no on coming traffic. The trailer didn't have a spare (brad new trailer) but I was able to find a used car tire at shop just a few miles up the road. So tomorrow I will be hunting down a NEW TRAILER tire. Hope to see everyone there.

04-14-2010, 09:40 PM	#3
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	glad you guys made it down ok after the adventure. Let the games begin! __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

04-14-2010, 09:47 PM	#4
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,444 View My Garage	Wow! Glad you guys made it in safe and sound. __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-14-2010, 10:03 PM	#9
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,486 View My Garage	Sit back relax tonight and the Cavalry will arrive soon... __________________

04-14-2010, 10:29 PM	#11
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	Well the rest of the time there and your trip back ought to be uneventful, sounds like you've burned up all the bad luck. __________________ ************************************* Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************

04-14-2010, 09:40 PM	#2
BackinBlackSS/RS Go Blue!!!!! Drives: 2012 Cruze LT Join Date: Mar 2009 Location: Indiana Posts: 23,290	Good lord, you really had some problems. Well, your ok and your there. Hey, do I remember you saying one time you guys were gonna do the SS emblem in the 5th gen font for the front grille and the back?

04-14-2010, 09:48 PM	#5
orange10s.c. Drives: IOM 2SS RS M6 sunroof Join Date: Jul 2009 Location: panama city fl Posts: 5,117 View My Garage	Well atleast you and the car or OK !!!!!!!!!!!!!!!!!!

04-14-2010, 09:50 PM	#6
OuSoonersGirl I need a V-1 BAD! Drives: 2010 Camaro SS Join Date: Jun 2009 Location: Oklahoma Posts: 850	Ouch, but glad you made it!

04-14-2010, 09:53 PM	#7
Little Drives: 2010 2SS Black Join Date: Jul 2009 Location: Thomasville, GA Posts: 61	Sounds like you had a rough go of it. Glad you made it OK. Welcome to (or back, which ever the case may be) South Georgia.

04-14-2010, 09:56 PM	#8
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	Can not wait to see your car...

04-14-2010, 10:08 PM	#10
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	Thanks guys, It was still a good time despite the problems. Just getting out of the shop and being away from the machining aspect, is great This will be our first event so I'm really looking forward to it. Backinblack- YES, we have come up with a SS emblem for the front grill that replaces the factory bowtie It's machined from a sold piece of billet aluminum and fits just like the bowtie did. No bolts, no glue, just pop out the bowtie and pop in the SS. Below the SS it reads 376 It is on my car so come by our booth and check it out. It wont be available for a while however, I want to get some feed back on it and see if people want it for what its going to cost to machine. I will also have to get a GM trademark license for it. But if there is a demand, it will get done

04-14-2010, 10:49 PM	#13
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,828 View My Garage	Well, the worst is behind you for a few days. Glad you made it! Will see you soon. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

04-14-2010, 11:43 PM	#14
AlSuwaidi Drives: BLACK LS3 GCC-Spec Join Date: Oct 2009 Location: UAE - SHARJAH Posts: 2,824 View My Garage	wohoooo am exited from half way round the world... cant wait to see what you all get up to!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Something To Think About!!	3whiterag	General Automotive + Other Cars Discussion	15	06-06-2012 05:44 PM
4 Gauge Pack on made ;o)	Blacky	Cosmetics and Lighting Modification Discussions	8	12-30-2009 04:53 PM
a couple of redubeds that made me lol so hard	305pride	Off-topic Discussions	11	12-07-2009 01:03 PM
Made in Canada	Camaro23	5th Gen Camaro SS LS LT General Discussions	104	07-17-2009 08:05 AM
Going Green, Means going Made In China	One Mean Chevy	Off-topic Discussions	0	04-26-2009 12:04 AM