Need pics of wheels set up. 35mm offset, 5mm spacer with 315s - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

angie7 · 07-14-2015, 10:43 PM

My current set up is 20x9 front and 20x10.5 rear 35mm offset running stock Pirellis at the moment. I have a 5mm spacer (could go down to a 3mm) on the rear right now bc the wheels are concave and do not clear the caliper. I'm wanting to go with 315/35/20. Is anyone running this set up? Can you post pics? I'm concerned how far this will stick out on the side of the car. I'm also lowered 1" front and 1.2" rear on eibach prokit performance springs.

Thanks!

oldfriend · 07-19-2015, 05:53 PM

You can do that yourself with the setup you have
Just add two 5/16 spacers to your rear wheel outside face , one on the bottom section off the wheel and one on the top , get a strait edge from top to bottom on those savers and you will see what it will look like

07-14-2015, 10:43 PM	#1
angie7 Smoked by a GIRL Drives: 2014 2SS/RS Join Date: Mar 2011 Location: Southern Indiana Posts: 3,748 View My Garage	Need pics of wheels set up. 35mm offset, 5mm spacer with 315s My current set up is 20x9 front and 20x10.5 rear 35mm offset running stock Pirellis at the moment. I have a 5mm spacer (could go down to a 3mm) on the rear right now bc the wheels are concave and do not clear the caliper. I'm wanting to go with 315/35/20. Is anyone running this set up? Can you post pics? I'm concerned how far this will stick out on the side of the car. I'm also lowered 1" front and 1.2" rear on eibach prokit performance springs. Thanks! __________________ 2014 2SS/RS Summit White w/ IOM interior "Powder 2.0"

07-19-2015, 05:53 PM	#2
oldfriend Drives: Fiat 500 E Join Date: Dec 2009 Location: 32.7607/N. 16.95947/W Posts: 7,816 View My Garage	You can do that yourself with the setup you have Just add two 5/16 spacers to your rear wheel outside face , one on the bottom section off the wheel and one on the top , get a strait edge from top to bottom on those savers and you will see what it will look like