06-14-2022, 04:49 AM | #1 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,966
|
Any edelbrock blower 1/4 mile times?
I dont see any on the fast list. thanks
__________________
2018 Camaro SS A8 Edelbrock 2650 FBO 93 octane 9.54@144 Pump E 9.59@152
2010 Camaro Stock bottom end with 46,000+miles JRE remote tuning Whipple A6 and Drive it to and from the track 9.46@146 |
06-14-2022, 08:27 AM | #2 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
You've got members such as EBHOBBIES low 9s with ported Eddies. I'll run one in a few weeks, but at 8000-10000 ft.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. Last edited by JSH; 06-14-2022 at 08:44 AM. |
06-14-2022, 08:40 AM | #3 | |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
Quote:
There have been some high 8 second Edelbrock 2650’s in 6th gens. In the C7 world Tim King went 8.30’s with his. He struggled with belt slip so it could have possibly gone quicker. That car was just over 3700 lbs race weight.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
|
06-14-2022, 04:11 PM | #4 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
I had posted on the Maggie v Eddie thread that I am getting a Kong ported Eddie and thought I recalled that you said you had a ported Kong blower, so I assumed an Eddie
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
06-14-2022, 04:27 PM | #5 |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
Makes sense. Kong ports the Magnuson 2650’s as well.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
|
|
Post Reply
|
|
|