Who here has Stainless Works Retro Chambered cat-back exhaust only??? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Silver2SSRS6spd · 12-24-2010, 12:57 PM

Just shot the video, let me cut it down a bit since it's in HD and probably huge. Still road noise from the back, not as much as before. I need to try from inside the car.

Silver2SSRS6spd · 12-24-2010, 01:50 PM

A bit on the noisy side, this is the best I could do while mounted outside the car.

843metalhead · 12-24-2010, 05:03 PM

Quote:

Originally Posted by Silver2SSRS6spd

A bit on the noisy side, this is the best I could do while mounted outside the car.

sounds great

Apex Motorsports · 12-25-2010, 01:23 PM

Quote:

Originally Posted by Silver2SSRS6spd

A bit on the noisy side, this is the best I could do while mounted outside the car.

Quote:

Originally Posted by 843metalhead

sounds great

I've been trying to tempt one of our locals into getting the Retro Chambered so I can shoot something for you but so far no takers.

Silver2SSRS6spd · 12-25-2010, 03:11 PM

Quote:

Originally Posted by Apex Chase

I've been trying to tempt one of our locals into getting the Retro Chambered so I can shoot something for you but so far no takers.

I like it a lot, it does do the pop corn thing a little. The sound and looks I get when I crank her up is awesome.

OUTATIME · 12-25-2010, 04:07 PM

I've been kind of curious about this for a while - How much of that sound is your CAI and how much of it is your exhaust on acceleration?

Apex Motorsports · 12-25-2010, 04:44 PM

Quote:

Originally Posted by OUTATIME

I've been kind of curious about this for a while - How much of that sound is your CAI and how much of it is your exhaust on acceleration?

The Retro Chambered cat back is a pretty aggressive system. Here are a couple more videos. The top three are from a customers of ours and the last one is straight from Stainless Works.

Tantalizer43 · 12-25-2010, 09:27 PM

Nice videos Apex!

I keep going back and forth on this exhaust...

I also like the Borla S type, and the Flowmaster American Thunder.

I'm half tempted to drive my ass to Louisville to check one of these Retro systems out when you put one on...

Apex Motorsports · 12-25-2010, 09:33 PM

Quote:

Originally Posted by Tantalizer43

Nice videos Apex!

I keep going back and forth on this exhaust...

I also like the Borla S type, and the Flowmaster American Thunder.

I'm half tempted to drive my ass to Louisville to check one of these Retro systems out when you put one on...

We just became a Borla warehouse distributor this month so if you decide to go that route we can hook you up there too.

Tantalizer43 · 12-25-2010, 09:57 PM

If you install a Borla S-Type cat back only, or a Stainless Works Retro Chambered Cat Back only, I'd love to take a short trip down there to check it out...

emlo3 · 12-25-2010, 10:13 PM

Stainless works sounds way better....hands down.. Heard them side by side

Silver2SSRS6spd · 12-26-2010, 12:44 AM

Quote:

Originally Posted by OUTATIME

I've been kind of curious about this for a while - How much of that sound is your CAI and how much of it is your exhaust on acceleration?

Funny you mention that, I was thinking today that I no longer hear the CAI with this new exhaust.

*TAG UR IT* · 12-26-2010, 01:09 AM

Quote:

Originally Posted by Apex Chase

TAG has a full Stainless Works systems from the headers back. I posted that in response to blazzin1. The more videos the better!

!!

Hey, I have a few more in my youtube account. Check out dpiden1 for more vids. They are all full exhaust, but maybe they'll help out.

Quote:

Originally Posted by Silver2SSRS6spd

Funny you mention that, I was thinking today that I no longer hear the CAI with this new exhaust.

Ask anyone from the San Antonio crew how my Stainless Works full system sounds. I know you aren't interested in headers right now. But, when you do.....HOLY SNIKEEEEEES!!!

Mike, 2010ABM, commented a few times on how awesome it sounds as the car is coming up from behind you at full throttle. I have the 2 1/2" mufflers on there right now just because the 3" were waaaay too loud. Might as well just be no mufflers on there at all. Just look at that straight through muffler you see above by Chase and you'll see mine is the same...straight through.

Apex Motorsports · 12-26-2010, 09:10 AM

Quote:

Originally Posted by Tantalizer43

If you install a Borla S-Type cat back only, or a Stainless Works Retro Chambered Cat Back only, I'd love to take a short trip down there to check it out...

They are two different animals, the Retro Chambered is a lot more aggressive. It would be closer to the ATAK.

12-24-2010, 12:57 PM	#15
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	Just shot the video, let me cut it down a bit since it's in HD and probably huge. Still road noise from the back, not as much as before. I need to try from inside the car. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

12-24-2010, 01:50 PM	#16
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	A bit on the noisy side, this is the best I could do while mounted outside the car. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

12-25-2010, 09:27 PM	#22
Tantalizer43 Drives: 2010 Camaro SS/RS Join Date: Aug 2008 Location: Cincinnati OH Posts: 1,359	Nice videos Apex! I keep going back and forth on this exhaust... I also like the Borla S type, and the Flowmaster American Thunder. I'm half tempted to drive my ass to Louisville to check one of these Retro systems out when you put one on... __________________

12-25-2010, 09:57 PM	#24
Tantalizer43 Drives: 2010 Camaro SS/RS Join Date: Aug 2008 Location: Cincinnati OH Posts: 1,359	If you install a Borla S-Type cat back only, or a Stainless Works Retro Chambered Cat Back only, I'd love to take a short trip down there to check it out... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stainless Works Re-Designed Cat Back	Stainless Works	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	61	11-14-2012 08:10 AM
Question About Cat Back & Axle Back Exhaust Systems	SamSS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	30	01-03-2010 01:42 PM
(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s)	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	162	07-09-2009 06:39 AM
Texas Speed & Performance full exhaust or Stainless works full exhaust?	2010 CAMARO SS RS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	05-31-2009 03:37 PM

12-25-2010, 04:07 PM	#20
OUTATIME Drives: 2010 IOM 2SS/RS Join Date: Oct 2008 Location: NJ Posts: 633	I've been kind of curious about this for a while - How much of that sound is your CAI and how much of it is your exhaust on acceleration?

12-25-2010, 10:13 PM	#25
emlo3 Drives: 2010 Camaro 2SS/RS Black M6 Join Date: Mar 2010 Location: Harrison, NY Posts: 41	Stainless works sounds way better....hands down.. Heard them side by side