PNW BS Thread-"Come On In"!

[RED DEMON SS]

First Headlamp is in the oven, we will see how it goes and i'll report back to you all!

[With envy]

Originally Posted by Farthestnorth

First Headlamp is in the oven, we will see how it goes and i'll report back to you all!

Mmmmm, headlamp!....

[Ladybugsmom]

I dropped off my wheels to get the powdercoat and paint done tonight.... Hope to have them back and on Ladybug by my birthday

[camarossowner]

Good luck. I had to go a bit above the required temp because of the gas oven. I think they said 170 for 15 minutes. I went up to 190 for 15 minutes.

Originally Posted by Farthestnorth

First Headlamp is in the oven, we will see how it goes and i'll report back to you all!

[RED DEMON SS]

Originally Posted by camarossowner

Good luck. I had to go a bit above the required temp because of the gas oven. I think they said 170 for 15 minutes. I went up to 190 for 15 minutes.

I baked them with an electric oven for 25 minutes at 225 degrees work like a charm, big thanks to John Sutton who has installed and done three sets of these!

[keving2873]

It is lighter looking becasue it is synthohol. They can't get real booze out of a replicator in Star Trek. Scotty hides his real Scotch under the helmet in his quarters....

Come'on now....

Originally Posted by Farthestnorth

I think he might be?

Attachment 422362

[RED DEMON SS]

[keving2873]

"You and me.... Put him right under the table..."

(insert awesome accent with this quote)

[RED DEMON SS]

Originally Posted by keving2873

"You and me.... Put him right under the table..."

(Capatain im a givn her all she's got!)

[GEEKFREEKSCOTTY]

Yes.. was out with the Mrs. on our "date night".

I think the ones made for cars with the GM ground effects have smaller diameter tips so the fit in those weird GM exhaust ports.

As Gary and I talked about before, I really think the reason why they have different mufflers for V8 vs. the V6 is that they tune it specifically for the sound. Not necessarily fitment, as I believe there isn't any spacing difference from the axle back between an LS/LT and a SS. A cat back or mufflers is mainly for sound anyway.

Besides, all these questions can easily be solved with a sawzall and a welder.

[heRS]

Originally Posted by Farthestnorth

I baked them with an electric oven for 25 minutes at 225 degrees work like a charm, big thanks to John Sutton who has installed and done three sets of these!

Attachment 422657

Attachment 422658

Attachment 422659

Attachment 422660

This will turn out awesome, I just know it. It's one of the most admired mods on my Camaro

[kjnylin]

Originally Posted by kjnylin

I'm having my splitter vinyl wrapped with carbon fiber pattern at Guardline in Puyallup. $100. Pick it up and installing it tomorrow. They are also applying the carbon fiber to the bow ties.

Pictures in a couple days.

Jake at Guardline gave it a noble effort but could not make the vinyl wrap stick well to the polyurethane splitter. So I dropped it off at Center Collision in Tacoma for painting. That was Wednesday. Yesterday they said after the second try there was still some "fish eye" in the paint. They are doing it a third time to make it perfect. I will pick it up Monday.

I'm learning that the flexible polyurethane material is just a bugger to get things to stick to it. I'm glad I didn't attempt the painting myself, and if there are problems later, I know Center Collision will take care of it.

[IOM Black Diamond]

Ok I think it is time for some of you Camaro's from up north to come south. Next weekend 22 & 23 is the last autocross of the year down here. I think it would be so much fun if there was a bunch of new Camaro's running. I am the only one that runs. It is held in a old RV lot so it is nice and big. It is going to be in Coburg, about 2 miles north of Eugene. I will be there both days

[Ladybugsmom]

If I didn't have to go to our regional management meeting on the 22nd, I'd go.... Hate working on Saturdays!