Harness for BK Bar - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MonroeZ28 · 06-03-2016, 08:57 AM

Is a 4pt harness the only thing that works with the BK harness bar? Just picked up a BK bar yesterday and want to make sure 4pt is the only option. Im only doing HPDEs not doing any racing with the car.

JTRATX · 06-03-2016, 03:50 PM

Yes, unless you add a tank plate.

Olddudesrule · 06-04-2016, 06:31 PM

Yup, gotta find some type of tank plate. Good luck, I've currently got two thread on here looking for someone making them, and little luck so far. They area fairly simple item, so I think if you found a machine shop/metal fab shop that was willing to make a one off design, if would be fairly easy.

JusticePete · 06-04-2016, 06:53 PM

Many groups are moving to 5 or 6 point harnesses only.

You can use these Simpson eye bolts, but you need to double up on the washers, one on top and one on the bottom.

http://www.summitracing.com/parts/si...0qUaAlUx8P8HAQ

http://www.summitracing.com/parts/si...gekaArnP8P8HAQ

These for the lap belt.

http://www.ogracing.com/brey-krause-...lt-gen5-camaro

Spyglass · 06-04-2016, 08:36 PM

Depends what org you go with.

Og Neon · 06-04-2016, 09:52 PM

Quote:

Originally Posted by JusticePete

Many groups are moving to 5 or 6 point harnesses only.

You can use these Simpson eye bolts, but you need to double up on the washers, one on top and one on the bottom.

http://www.summitracing.com/parts/si...0qUaAlUx8P8HAQ

http://www.summitracing.com/parts/si...gekaArnP8P8HAQ

These for the lap belt.

http://www.ogracing.com/brey-krause-...lt-gen5-camaro

What groups are going that way? Most seem to only allow 5/6 points if you have a cage. So that implies they want cages too for HPDE?

JusticePete · 06-04-2016, 09:55 PM

Quote:

Originally Posted by Og Neon

What groups are going that way? Most seem to only allow 5/6 points if you have a cage. So that implies they want cages too for HPDE?

OPTIMA for one. Three point factory belt. No four point harnesses. Five or six point if you choose to wear a harness. Harnesses can be mounted to a HB or cage.

06-03-2016, 08:57 AM	#1
MonroeZ28 Drives: 15 z28 white Join Date: Apr 2016 Location: Orange County NY Posts: 174	Harness for BK Bar Is a 4pt harness the only thing that works with the BK harness bar? Just picked up a BK bar yesterday and want to make sure 4pt is the only option. Im only doing HPDEs not doing any racing with the car.

06-04-2016, 06:31 PM	#3
Olddudesrule Resident nomad Drives: 2014 Summit White 1SS/1LE Join Date: Nov 2015 Location: Gilbert, AZ Posts: 1,765	Yup, gotta find some type of tank plate. Good luck, I've currently got two thread on here looking for someone making them, and little luck so far. They area fairly simple item, so I think if you found a machine shop/metal fab shop that was willing to make a one off design, if would be fairly easy. __________________ Sold: 2007 Z06 2002 Viper GTS/ACR 2003 Z06 1965 FFR Cobra 2012 Nissan 370Z ADM LSA Stage II, Roto-Fab CAI, Kooks LTH/HFC's, Phastek CC, ported TB, Mishimoto radiator and oil cooler, BC Racing ER Series CO's, JPSS 32mm Black Magic rear bar, JPSS front inserts, R1 Concepts Premier slotted rotors/Goodrich SS lines, Schroth ASM harness, MGW flatstick, Brey-Krause HB, Tuned by NicD, at Cordes Performance Racing.

06-03-2016, 03:50 PM	#2
JTRATX Drives: 17 SS 1LE, 14 Yukon Denali Join Date: May 2015 Location: Austin, TX Posts: 355	Yes, unless you add a tank plate.

06-04-2016, 06:53 PM	#4
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Many groups are moving to 5 or 6 point harnesses only. You can use these Simpson eye bolts, but you need to double up on the washers, one on top and one on the bottom. http://www.summitracing.com/parts/si...0qUaAlUx8P8HAQ http://www.summitracing.com/parts/si...gekaArnP8P8HAQ These for the lap belt. http://www.ogracing.com/brey-krause-...lt-gen5-camaro

06-04-2016, 08:36 PM	#5
Spyglass Drives: Too many Join Date: Mar 2016 Location: Big Apple Posts: 152	Depends what org you go with.