05-10-2018, 08:59 PM | #15 | |
Account Suspended
Drives: 2013 1LT RS Camaro Join Date: Apr 2016
Location: Southeast Michigan
Posts: 3,494
|
Quote:
|
|
01-10-2021, 09:31 AM | #16 |
How much is the different in hp of the stock 80mm and the the ported 80mm anyone know ,I have heard maybe 1 to 2 up ?
|
|
01-12-2021, 06:05 PM | #17 |
Drives: 2012 Victory Red LFX Join Date: Dec 2012
Location: west central Texas
Posts: 1,310
|
The tests I've seen show really no gains without an intake upgrade and that's on V8s so a little six? Probably nothing worth mentioning.
__________________
2018 SS wheels, red Heritage grille, actual driving lights, ZL1 strut tower brace, GM Performance billet aluminum fuel door, front grille Bowtie delete, painted red rotors and calipers, 1/4 window American Flags, splash guards, AEM dry panel air filter.
|
03-15-2021, 02:45 AM | #18 |
Drives: 2013 ZL1 A6 Camaro Join Date: Jun 2013
Location: Florida
Posts: 171
|
Id like to buy the throttle body and spacer plated needed for it to bolt up
__________________
2013 ZL1 Camaro A6. ARH Headers, K&N intake, Tuned by Tampa Tuning
2014 V6 Camaro bolt ons and E85 Tuned by Tampa Tuning Last edited by ABM Camaro; 03-15-2021 at 08:27 PM. |
06-23-2022, 09:35 PM | #19 |
Drives: 2011 Camaro Con. V6 Join Date: May 2020
Location: NY
Posts: 7
|
Anyone know where I can get the 80mm throttle body from? Ive tried Overkill sports but paypal wont let you checl out, says theres something wrong with the sellers site. Ive emailed overkill hoping for a response
|
06-23-2022, 11:06 PM | #20 |
Drives: 2015 Camaro LT Join Date: Sep 2016
Location: Fox Lake, IL
Posts: 393
|
The throttle body itself was used on other GM models at the time I believe. I bought mine off of eBay years ago. While you can probably find the TB out there, the adapter plate is key. You can’t mount the TB to the upper intake without it.
My old notes on this had: Cadillac CTS 2012-2014 Cadillac ATS 2013-2015 Colorado/Canyon 2015-2017 I think these were models that had the 80mm from the factory, but I’m not 100% sure on that. But again, without a proper adaapter, it will sit on the shelf. And it was Overkill that machined the adapter.
__________________
|
|
|
|
|