08-10-2013, 03:51 PM | #1 |
Drives: 2012 ZL1 Join Date: Dec 2011
Location: pittsburgh area
Posts: 1,426
|
bumper cover removal
Trying to find a zl1 specific thread on how to remove front and rear bumper covers. Am i missing it?
__________________
2012 CTF ZL1-stock
2012 ZL1 (sold) JRE 75rwhp kit catless ported lsa TB 11.04 @ 128.35 on hoosier drs and skinnies @ PRP with 1100DA |
08-10-2013, 04:29 PM | #2 |
Romanian Outlaw
Drives: 13 ZL1 , 14 Silverado Crew Cab Join Date: Apr 2010
Location: Texas Baby
Posts: 1,082
|
Almost the same as the ss!! Really not much difference.. Look for the ss removal
__________________
[/SIGPIC]2013 Camaro ZL1 M6
|
09-01-2013, 06:31 AM | #3 |
Drives: 2012 ZL1 #165 Join Date: Apr 2009
Location: Switzerland (no longer Houston, TX) :-(
Posts: 479
|
are there any additional bolts that hold the belly pan to the front?
|
09-01-2013, 08:19 AM | #5 |
Drives: 2012 ZL1 #1448 Join Date: May 2009
Location: WNY
Posts: 892
|
Front bumper http://www.camaro5.com/forums/showth...bumper+removal
Rear bumper http://www.camaro5.com/forums/showth...bumper+removal
__________________
2012 ZL1 SIM, MN6, B92, RTQ
ZL1 - the true definition of joy ride |
09-01-2013, 08:27 AM | #6 |
Drives: 2012 ZL1 #1448 Join Date: May 2009
Location: WNY
Posts: 892
|
I think it was 10 bolts plus 2 plastic push clips that hold the belly pan
__________________
2012 ZL1 SIM, MN6, B92, RTQ
ZL1 - the true definition of joy ride |
09-01-2013, 11:49 AM | #7 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
To remove the front bumper, you only need to remove the front screws from the front edge belly pan. Most are T15 Torx, but there are 4 10MM bolts as well. Also, don't forget there are 2 screws holding each brake duct on the car that have to come out to remove the bumper. Other than those and the belly pan screws, it's exactly the same as the SS.
|
|
|
|
|