Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 12-28-2012, 08:25 AM   #1
MS7
 
MS7's Avatar
 
Drives: 2011 camaro LS3 supercharger
Join Date: Aug 2012
Location: JEDDAH
Posts: 96
clutch can handle 650 RWHP.Q

My camaro now with 625 RWHP and the stock clutch cannot handle this high power..os the time for get new one.

i need clutch can handle 650 RWHP with no problem& good price for my camaro 2011
.FYI my gool is 650 RWHP no more?

thanks
MS7 is offline   Reply With Quote
Old 12-28-2012, 09:21 AM   #2
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,797
SPEC Stage 2+ single disc holds 715ft lbs of torque, and retails for $501. You reuse your flywheel, so it's good bang for your buck. I have the SPEC Stage 3+.
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 12-28-2012, 10:02 AM   #3
Detoxx03
ЯєŧąяĐ Єl¡m¡иąŧøя ™
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 876
RPS BC2
__________________

D1SC Procharger 932/758 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
Old 12-28-2012, 10:23 AM   #4
VanquisherSS
Hasbin of Stock Bottom HP
 
Drives: CTS-V Coupe, 04 TT Viper
Join Date: May 2011
Location: NJ
Posts: 2,561
I got 844whp on the stock clutch. No probs so far.
VanquisherSS is offline   Reply With Quote
Old 12-28-2012, 11:02 AM   #5
simon.w
Account Suspended
 
Drives: 2011 2SS RS 6M Inferno Orange
Join Date: Nov 2010
Location: San Clemente CA
Posts: 309
Mantic ER2.

Comes as a complete kit including flywheel and throw out bearing.

The clutch plate is dual friction ... Cerametalic on one side, organic on the other.

The pressure plate is spheroidal graphite iron which is 3 times stronger than normal iron and grooved like high end brake rotors to increase friction and dissapate heat.

A lot of very modern science behind the product ... Check out their website:

http://www.mantic.com.au

simon.w is offline   Reply With Quote
Old 12-28-2012, 11:14 AM   #6
Twin2010
 
Drives: 2010 twin turbo ss
Join Date: Nov 2012
Location: Oklahoma City
Posts: 306
I did the zr1 kit from slp.The pedal still feels stock. I love it
Twin2010 is offline   Reply With Quote
Old 12-28-2012, 01:46 PM   #7
SSTony

 
SSTony's Avatar
 
Drives: SS Camaro
Join Date: Jul 2009
Location: Piscataway NJ
Posts: 1,782
Send a message via AIM to SSTony
I went with the centerforce. Love it
__________________
SSTony is offline   Reply With Quote
Old 12-29-2012, 11:35 AM   #8
TurboCamaro
 
TurboCamaro's Avatar
 
Drives: 2010 Camaro SS - Turbocharged
Join Date: Sep 2010
Location: Moorpark, CA
Posts: 32
We put a Center Force Dual Friction in our development car, it now has 26,000 miles on plus over 500 hours of Dyno abuse...the clutch is awesome. Contact Will at Center Force
TurboCamaro is offline   Reply With Quote
Old 01-01-2013, 11:06 AM   #9
MS7
 
MS7's Avatar
 
Drives: 2011 camaro LS3 supercharger
Join Date: Aug 2012
Location: JEDDAH
Posts: 96
Quote:
Originally Posted by 2SS45th View Post
SPEC Stage 2+ single disc holds 715ft lbs of torque, and retails for $501. You reuse your flywheel, so it's good bang for your buck. I have the SPEC Stage 3+.

you mean.. i can use the stock flywheel with it?
MS7 is offline   Reply With Quote
Old 01-01-2013, 07:52 PM   #10
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,835
Quote:
Originally Posted by 2SS45th View Post
SPEC Stage 2+ single disc holds 715ft lbs of torque, and retails for $501. You reuse your flywheel, so it's good bang for your buck. I have the SPEC Stage 3+.
BAD,very bad idea
Hendrix-Engineering is offline   Reply With Quote
Old 01-01-2013, 07:53 PM   #11
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,835
Quote:
Originally Posted by Detoxx03 View Post
RPS BC2
GREAT clutch,however they dont offer one for the new camaro
Hendrix-Engineering is offline   Reply With Quote
Old 01-01-2013, 10:46 PM   #12
blufin

 
blufin's Avatar
 
Drives: Fire Engine
Join Date: Oct 2008
Location: WPB, Florida
Posts: 1,415
Love my Street Slayer dual carbon.
__________________
12.618 @ 110.75 Bone Stock 1/4 mile
8.165 @ 86.52 Bone Stock 1/8 mile
11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires.
Sold
blufin is offline   Reply With Quote
Old 01-02-2013, 05:10 AM   #13
maxdmax

 
maxdmax's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2008
Location: East KY
Posts: 756
I have had a few clutches in my car, When we were doing our last mods we call a lot of clutch manufactures. As soon as we said we need a clutch that will hold at 800+ foot pounds of torque, things either got silent for a minute or we got transferred to somebody else. I finally broke down and got a Hendrix Street Slayer Carbon Triple Disc clutch, this is by far the best clutch I ever used in any car. Guys the Street Slayer Carbon clutch is the clutch right now for our heavy cars.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
maxdmax is offline   Reply With Quote
Old 01-02-2013, 09:42 AM   #14
Boost6924
 
Drives: 2SS/RS
Join Date: Apr 2010
Location: Indianapolis,IN
Posts: 417
Can't go wrong with RPS clutches.
__________________
438cid IPS Twin Turbo.
Boost6924 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:05 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.