No engine cover and I want to add a hood vent, is that a problem? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1JEWLDSSRS · 12-10-2018, 04:10 PM

Awesome looking pics Jayjellyfish!! Under hood looks really nice! What intake tube are you running? And why does it curve to the passenger side? Or is it something custom you created for your car. Thanks

Spec · 12-10-2018, 07:55 PM

Man... I concur... that's niiiiice....

Jayjellyfish212 · 12-10-2018, 10:02 PM

Thanks guys. The intake tube is one I custom made out of real carbon fiber. Looked good when finished as carbon fibers but felt it was starting to look to dark in the engine bay so I painted to match. The end of the tube has a cone style 9x6 filter with a water screen filter by Filter Wears . I don’t usually drive the car in crappy weather but once in awhile get stuck in rain unexpectedly. Reason I added the filter sock. The cone filter weighs more than the tube itself. My idea was solely based on going from passenger side to keep the intake from sitting over the hot hoses of the radiator.

Jayjellyfish212 · 12-10-2018, 10:13 PM

The picture of my engine bay is a bit outdated. I think that was beginning summer or mid summer. The engine bay has more now like clutch fluid separate reservoir and a Hurst roll controller. Currently the car is apart for winter mods that I’m in process of a true racing oil cooler install with duel sensors for oil temp readings. Also relocating the fuel line with full upgrades to 8an ran through trans tunnel.

ZOOK · 12-11-2018, 08:35 PM

This is the TL1 That i did ...It has a drain tray

inferno1 · 12-13-2018, 07:01 PM

that is pretty fuking sweet if I may say. How $$$$$

This is the TL1 That i did ...It has a drain tray[/QUOTE]

1JEWLDSSRS · 12-14-2018, 08:33 AM

Quote:

Originally Posted by ZOOK

This is the TL1 That i did ...It has a drain tray

Wow man, that looks fantastic sir !! Love it.

1JEWLDSSRS · 12-14-2018, 08:35 AM

Quote:

Originally Posted by Jayjellyfish212

Thanks guys. The intake tube is one I custom made out of real carbon fiber. Looked good when finished as carbon fibers but felt it was starting to look to dark in the engine bay so I painted to match. The end of the tube has a cone style 9x6 filter with a water screen filter by Filter Wears . I don’t usually drive the car in crappy weather but once in awhile get stuck in rain unexpectedly. Reason I added the filter sock. The cone filter weighs more than the tube itself. My idea was solely based on going from passenger side to keep the intake from sitting over the hot hoses of the radiator.

Good morning Jayjellyfish, thanks for the explaination, as I said, man that looks killer! Nicely done..

Joecruiser · 12-15-2018, 08:20 PM

Awesome hood ZOOK. How is the TL1 scoop attached to the hood? Adhesives? Install looks really clean...like factory built.

12-10-2018, 04:10 PM	#15
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,402	Awesome looking pics Jayjellyfish!! Under hood looks really nice! What intake tube are you running? And why does it curve to the passenger side? Or is it something custom you created for your car. Thanks __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

12-10-2018, 10:02 PM	#17
Jayjellyfish212 Drives: 2014 1LE Join Date: Aug 2015 Location: Upstate NY Posts: 2,050 View My Garage	Thanks guys. The intake tube is one I custom made out of real carbon fiber. Looked good when finished as carbon fibers but felt it was starting to look to dark in the engine bay so I painted to match. The end of the tube has a cone style 9x6 filter with a water screen filter by Filter Wears . I don’t usually drive the car in crappy weather but once in awhile get stuck in rain unexpectedly. Reason I added the filter sock. The cone filter weighs more than the tube itself. My idea was solely based on going from passenger side to keep the intake from sitting over the hot hoses of the radiator. __________________ Car mods: never enough!

12-10-2018, 10:13 PM	#18
Jayjellyfish212 Drives: 2014 1LE Join Date: Aug 2015 Location: Upstate NY Posts: 2,050 View My Garage	The picture of my engine bay is a bit outdated. I think that was beginning summer or mid summer. The engine bay has more now like clutch fluid separate reservoir and a Hurst roll controller. Currently the car is apart for winter mods that I’m in process of a true racing oil cooler install with duel sensors for oil temp readings. Also relocating the fuel line with full upgrades to 8an ran through trans tunnel. __________________ Car mods: never enough!

12-11-2018, 08:35 PM	#19
ZOOK Drives: 2010 2ss 6 speed Join Date: Apr 2011 Location: NEW BRUNSWICK CANADA Posts: 328	ACS Tl 1 This is the TL1 That i did ...It has a drain tray

12-10-2018, 07:55 PM	#16
Spec Account Suspended Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015 Location: Riverside, CA Posts: 4,018	Man... I concur... that's niiiiice....

12-13-2018, 07:01 PM	#20
inferno1 Drives: 2010 2SS/RS Join Date: Aug 2016 Location: Mt. Washington Ky Posts: 41	that is pretty fuking sweet if I may say. How $$$$$ This is the TL1 That i did ...It has a drain tray[/QUOTE]

12-15-2018, 08:20 PM	#23
Joecruiser Drives: 2014 2-SSRS Slushbox Join Date: Sep 2018 Location: Coral Gables, FL Posts: 339	Awesome hood ZOOK. How is the TL1 scoop attached to the hood? Adhesives? Install looks really clean...like factory built.