You are browsing camaro5 
 |
|
06-20-2015, 03:22 PM
|
#1 |
|
I haz camaro again :)
Drives: 2010 Chevrolet Camaro 1SS Join Date: Mar 2009
Location: Union, South Carolina
Posts: 660
|
TR-6060 noise at idle without foot on clutch
Okay guys so today I've had my first day off in almost a month(hence the dirty car) so I did an oil change and went for a ride. Suddenly I hear this noise while riding down the road. I come to a stop and when the clutch pedal is pressed the noise goes away, but with my foot off the clutch it makes this noise. I've attached a video. My only guess is the slave cylinder/throw out bearing has been trashed. Thanks in advance for any help.
__________________
2010 Camaro 1SS(back in a camaro again, yessssss!)
2010 silverado z71 ccsb(sold, old dd) 2010 camaro1ss(sold, missed, will have another someday) |
|
|
|
06-20-2015, 03:29 PM
|
#2 |
           
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
When the clutch is out the input shaft of the tranny is spinning. Push the clutch in and the input shaft stops. The clutch is what connects the crank of the engine to the input of the tranny. What your hearing is the input shaft more than likely. A thow out bearing can be noisy too with the clutch out.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
|
|
|
|
|
|
|
 |
|
|
