2012 2SS Turbo M6 build thread - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

outlawprostreet · 07-09-2017, 08:05 PM

Well I've been a lurker since 2011. Figured I'd start a build thread.

This car has been 100% garage and Jack stand built. I do the tuning using HP tuners

Mods

Motor
-100% stock

Forced induction
-Turbonetics Turbo kit T76 turbo, wastegates dumped

Fuel
-FIC 1000cc injectors
-Squash fuel pump

Drivetrain
-Mcleod RXT
-GFORCE 9" rear

Brakes
-Holley (RB) 2 piece front disks
-cross drilled rotors on rear

Suspension
-BMR springs, toe rods, and trailing arms

Wheels
-Forgestar CF5 20x9 and 20x11
Track
-Forgestar F14 18x9 and 18x10

outlawprostreet · 07-09-2017, 08:24 PM

John_C · 07-10-2017, 03:41 AM

Nice build!

Where did you get those sexy coil pack covers that look like valve covers? I'd like to clean up my LS3 like that. Anything else needed to do that besides those covers?

Do you have any widebands yet?

If not, check out this: http://www.aemelectronics.com/?q=pro...and-uego-OBDII

Trying to set 2 up on my junk via HPTuners.

Setup video here:

https://www.youtube.com/watch?annota...&v=ozJz-pNFCuo

outlawprostreet · 07-11-2017, 08:28 AM

Quote:

Originally Posted by John_C

Nice build!

Where did you get those sexy coil pack covers that look like valve covers? I'd like to clean up my LS3 like that. Anything else needed to do that besides those covers?

Do you have any widebands yet?

If not, check out this: http://www.aemelectronics.com/?q=pro...and-uego-OBDII

Trying to set 2 up on my junk via HPTuners.

Setup video here:

https://www.youtube.com/watch?annota...&v=ozJz-pNFCuo

Thanks! Those are actually just normal valve covers my coil packs are hidden in the fender well. I'll post up pics of the clean up next. I've actually got a set of carbon fiber valve covers in the garage I need to put on.

I have a single innovate lc1 wide band in the downpipe. It works pretty decent I think. Haven't burnt anything up yet lol

outlawprostreet · 07-13-2017, 10:57 PM

Updates

-Rb racing 2 piece rotors

-18" Forgestar F14's in gunmetal with M/T drag radials on the rear. Huge improvement in traction over the Nitto nt05 305 rears. Plus dropped 26lbs total on the wheels and tires

-Carbon fiber valve covers

perfucto · 07-14-2017, 11:30 AM

Where did you get the carbon fiber valve covers?

outlawprostreet · 07-14-2017, 12:06 PM

Quote:

Originally Posted by perfucto

Where did you get the carbon fiber valve covers?

Scoggin Dickey parts

outlawprostreet · 07-19-2017, 07:49 AM

Got my sparco R100's in, I went with the sparco bases. Height seems good and I'm 6'. May be a little close with a helmet though. I definitely like them

outlawprostreet · 08-11-2017, 11:25 PM

Since Photobucket has gotten greedy, I'll have to fix all my pictures. For now here's a couple of the latest

outlawprostreet · 08-13-2017, 10:27 PM

Some pics from today.. added a ZL1 front bumper, carbon fiber bezels, and apr splitter

John_C · 08-14-2017, 07:24 AM

Quote:

Originally Posted by outlawprostreet

Got my sparco R100's in, I went with the sparco bases. Height seems good and I'm 6'. May be a little close with a helmet though. I definitely like them

Do they sell those in leather?

07-09-2017, 08:05 PM	#1
outlawprostreet Drives: 2012 Turbo SS Join Date: Sep 2011 Location: FL Posts: 210 View My Garage	2012 2SS Turbo M6 build thread Well I've been a lurker since 2011. Figured I'd start a build thread. This car has been 100% garage and Jack stand built. I do the tuning using HP tuners Mods Motor -100% stock Forced induction -Turbonetics Turbo kit T76 turbo, wastegates dumped Fuel -FIC 1000cc injectors -Squash fuel pump Drivetrain -Mcleod RXT -GFORCE 9" rear Brakes -Holley (RB) 2 piece front disks -cross drilled rotors on rear Suspension -BMR springs, toe rods, and trailing arms Wheels -Forgestar CF5 20x9 and 20x11 Track -Forgestar F14 18x9 and 18x10 __________________ LS3 M6 w/ Turbonetics stage 1 turbo kit Huron Speed twin 64's waiting to be installed Last edited by outlawprostreet; 08-13-2017 at 10:24 PM.

07-09-2017, 08:24 PM	#2
outlawprostreet Drives: 2012 Turbo SS Join Date: Sep 2011 Location: FL Posts: 210 View My Garage	__________________ LS3 M6 w/ Turbonetics stage 1 turbo kit Huron Speed twin 64's waiting to be installed Last edited by outlawprostreet; 08-13-2017 at 10:21 PM.

07-10-2017, 03:41 AM	#3
John_C LSx FTW!!! Drives: 2010 Camaro 2SS RS Join Date: Jan 2017 Location: TN Posts: 767	Nice build! Where did you get those sexy coil pack covers that look like valve covers? I'd like to clean up my LS3 like that. Anything else needed to do that besides those covers? Do you have any widebands yet? If not, check out this: http://www.aemelectronics.com/?q=pro...and-uego-OBDII Trying to set 2 up on my junk via HPTuners. Setup video here: https://www.youtube.com/watch?annota...&v=ozJz-pNFCuo __________________ 2010 2SS RS A6 781rwhp on E85 Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite

07-13-2017, 10:57 PM	#5
outlawprostreet Drives: 2012 Turbo SS Join Date: Sep 2011 Location: FL Posts: 210 View My Garage	Updates -Rb racing 2 piece rotors -18" Forgestar F14's in gunmetal with M/T drag radials on the rear. Huge improvement in traction over the Nitto nt05 305 rears. Plus dropped 26lbs total on the wheels and tires -Carbon fiber valve covers Attached Images __________________ LS3 M6 w/ Turbonetics stage 1 turbo kit Huron Speed twin 64's waiting to be installed Last edited by outlawprostreet; 08-11-2017 at 11:53 PM.

07-19-2017, 07:49 AM	#8
outlawprostreet Drives: 2012 Turbo SS Join Date: Sep 2011 Location: FL Posts: 210 View My Garage	Got my sparco R100's in, I went with the sparco bases. Height seems good and I'm 6'. May be a little close with a helmet though. I definitely like them Attached Images __________________ LS3 M6 w/ Turbonetics stage 1 turbo kit Huron Speed twin 64's waiting to be installed

07-14-2017, 11:30 AM	#6
perfucto Drives: 2013 ZL1 Join Date: Nov 2012 Location: Estero, FL Posts: 383	Where did you get the carbon fiber valve covers?

08-11-2017, 11:25 PM	#9
outlawprostreet Drives: 2012 Turbo SS Join Date: Sep 2011 Location: FL Posts: 210 View My Garage	Since Photobucket has gotten greedy, I'll have to fix all my pictures. For now here's a couple of the latest Attached Images __________________ LS3 M6 w/ Turbonetics stage 1 turbo kit Huron Speed twin 64's waiting to be installed

08-13-2017, 10:27 PM	#10
outlawprostreet Drives: 2012 Turbo SS Join Date: Sep 2011 Location: FL Posts: 210 View My Garage	Some pics from today.. added a ZL1 front bumper, carbon fiber bezels, and apr splitter Attached Images __________________ LS3 M6 w/ Turbonetics stage 1 turbo kit Huron Speed twin 64's waiting to be installed